Stuck at "Jumping to 0x00224D50" when booting up Win CE 6.0 image

[jrdchan]

Hi,



I am new to Win Ce, so please bear with me



I have downloaded the BSP for Atom processor from Bsquare and managed to

create an NK.bin image and setting up the harddisk with CEPCboot.144.



With NK.bin on the harddisk, i chose "Boot CE/PC (local nk.bin) at startup.

I see text rolling "Physical Sector ..." and percentages. All is good until

the screen blanks and text "Jumping to 0x00224D50" appears then system just

sits and waits.



Can anyone enlighted me what could be the issue and any document I can study?



regards Dawn

 

[Paul G. Tobey [eMVP]]

That's the point at which CE boots. It might indicate that you've built a

DEBUG image and the device is trying to connect to Platform Builder. It

might indicate that you built the OS wrong (config.bib, etc.), and there was

an exception early in boot. It might indicate that you included the wrong

display adapter, wrong display settings, wrong display type, etc. and the OS

is running fine, but the display simply isn't working.



We have no way to tell these apart based on what you've told us...



Paul T.



"jrdchan" wrote:



> Hi,

>

> I am new to Win Ce, so please bear with me

>

> I have downloaded the BSP for Atom processor from Bsquare and managed to

> create an NK.bin image and setting up the harddisk with CEPCboot.144.

>

> With NK.bin on the harddisk, i chose "Boot CE/PC (local nk.bin) at startup.

> I see text rolling "Physical Sector ..." and percentages. All is good until

> the screen blanks and text "Jumping to 0x00224D50" appears then system just

> sits and waits.

>

> Can anyone enlighted me what could be the issue and any document I can study?

>

> regards Dawn

>