RunDLL32 Error

D

Dan

Here is the error I received when updating my Microsoft Virtual Private
Networking Driver in Microsoft Windows 98 Second Edition. What does anyone
make of it? Thanks in advance for all the suggestions.

RUNDLL32 caused a general protection fault
in module SETUPX.DLL at 0006:00000053.
Registers:
EAX=00000018 CS=2b0f EIP=00000053 EFLGS=00000206
EBX=00000012 SS=2bef ESP=00007d38 EBP=00007d42
ECX=00000000 DS=2a2f ESI=000202c0 FS=0000
EDX=00000000 ES=0000 EDI=000002c0 GS=0000
Bytes at CS:EIP:
26 ff 74 12 9a 2b 50 af 17 8e 46 08 26 83 7c 14
Stack dump:
d8182a2f 00000000 7d4e0018 2b0f0127 00188fa4 7eeed818 2b1728a1 37ced818
4ea440df 61754c98 7250206c 74617669 654e2065 726f7774 676e696b 61644120
 
P

PCR

"Dan" <Dan@discussions.microsoft.com> wrote in message
news:AE3501EA-9B46-4FFE-9BDF-10BE497AE7EA@microsoft.com
| Here is the error I received when updating my Microsoft Virtual
| Private Networking Driver in Microsoft Windows 98 Second Edition.
| What does anyone make of it? Thanks in advance for all the
| suggestions.

Are you sure you are not irradiating the Win98 side again with
XP-drivers? I see nothing linking RUNDLL32 with SETUPX.DLL at...
http://search.support.microsoft.com/search/?adv=1&spid=1139 MSKB

Here is how to replace SETUPX.DLL, if necessary...

SETUPX.DLL
Desc: Windows Setup Functions
Loc: C:\WINDOWS\SYSTEM
Size: 745,168 bytes
Mod: Friday, April 23, 1999 10:22:00 PM
Ver: 4.10.2222

That is old enough (in Win98SE) never to have been modified by an
update. So, extract it with SFC, if you can boot to Windows.

(1) "START button, Run, SFC"
(2) Bolt "Extract one file from installation disk"
(3) Enter "SETUPX.DLL" in the "Specify..." box.
(4) Click "Start".
(5) It should offer to "Save file in C:\WINDOWS\SYSTEM".
If not, make it so.
(6) In "Restore from", if not already pre-filled, browse to
(a) Installation CD (likely the Win98 folder) or
(b) The folder that has your cabs on the hard drive, likely
"C:\WINDOWS\options\cabs\".
(7) Click "OK"

If it discovers the file already exists, it will offer to back it up.
May as well do so. If it discovers the file is "in use", it will request
that you reboot to complete the install.

If you cannot do it in Windows, do it in DOS, per the instructions in...
http://support.microsoft.com/kb/306618/en-us
Error Message When You Start Your Computer: Msgsrv32 Caused Segment Not
Present Fault in Module Setupx.dll

And here is what a healthy Rundll32.exe should look like...!...

RUNDLL32.EXE
Desc: Run a DLL as an App
Loc: C:\WINDOWS
Size: 24,576 bytes
Mod: Friday, April 23, 1999 10:22:00 PM
Ver: 4.10.1998

That is old enough (Win98SE) never to have been modified by an update.
So, extract it with SFC.

(1) "START button, Run, SFC"
(2) Bolt "Extract one file from installation disk"
(3) Enter "RUNDLL32.EXE" in the "Specify..." box.
(4) Click "Start". It should offer to "Save file in C:\WINDOWS".
If not, make it so.
(5) In "Restore from", if not already pre-filled, browse to
(a) Installation CD (likely the Win98 folder) or
(b) The folder that has your cabs on the hard drive, likely
"C:\WINDOWS\options\cabs\".
(5) Click "OK"

If it discovers the file already exists, it will offer to back it up.
May as well do so. If it discovers the file is "in use", it will request
that you reboot to complete the install.

| RUNDLL32 caused a general protection fault
| in module SETUPX.DLL at 0006:00000053.
| Registers:
| EAX=00000018 CS=2b0f EIP=00000053 EFLGS=00000206
| EBX=00000012 SS=2bef ESP=00007d38 EBP=00007d42
| ECX=00000000 DS=2a2f ESI=000202c0 FS=0000
| EDX=00000000 ES=0000 EDI=000002c0 GS=0000
| Bytes at CS:EIP:
| 26 ff 74 12 9a 2b 50 af 17 8e 46 08 26 83 7c 14
| Stack dump:
| d8182a2f 00000000 7d4e0018 2b0f0127 00188fa4 7eeed818 2b1728a1
| 37ced818 4ea440df 61754c98 7250206c 74617669 654e2065 726f7774
| 676e696b 61644120

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net
 
D

dph

Excellent assistance, worked perfectly.
Thanks

"PCR" wrote:

> "Dan" <Dan@discussions.microsoft.com> wrote in message
> news:AE3501EA-9B46-4FFE-9BDF-10BE497AE7EA@microsoft.com
> | Here is the error I received when updating my Microsoft Virtual
> | Private Networking Driver in Microsoft Windows 98 Second Edition.
> | What does anyone make of it? Thanks in advance for all the
> | suggestions.
>
> Are you sure you are not irradiating the Win98 side again with
> XP-drivers? I see nothing linking RUNDLL32 with SETUPX.DLL at...
> http://search.support.microsoft.com/search/?adv=1&spid=1139 MSKB
>
> Here is how to replace SETUPX.DLL, if necessary...
>
> SETUPX.DLL
> Desc: Windows Setup Functions
> Loc: C:\WINDOWS\SYSTEM
> Size: 745,168 bytes
> Mod: Friday, April 23, 1999 10:22:00 PM
> Ver: 4.10.2222
>
> That is old enough (in Win98SE) never to have been modified by an
> update. So, extract it with SFC, if you can boot to Windows.
>
> (1) "START button, Run, SFC"
> (2) Bolt "Extract one file from installation disk"
> (3) Enter "SETUPX.DLL" in the "Specify..." box.
> (4) Click "Start".
> (5) It should offer to "Save file in C:\WINDOWS\SYSTEM".
> If not, make it so.
> (6) In "Restore from", if not already pre-filled, browse to
> (a) Installation CD (likely the Win98 folder) or
> (b) The folder that has your cabs on the hard drive, likely
> "C:\WINDOWS\options\cabs\".
> (7) Click "OK"
>
> If it discovers the file already exists, it will offer to back it up.
> May as well do so. If it discovers the file is "in use", it will request
> that you reboot to complete the install.
>
> If you cannot do it in Windows, do it in DOS, per the instructions in...
> http://support.microsoft.com/kb/306618/en-us
> Error Message When You Start Your Computer: Msgsrv32 Caused Segment Not
> Present Fault in Module Setupx.dll
>
> And here is what a healthy Rundll32.exe should look like...!...
>
> RUNDLL32.EXE
> Desc: Run a DLL as an App
> Loc: C:\WINDOWS
> Size: 24,576 bytes
> Mod: Friday, April 23, 1999 10:22:00 PM
> Ver: 4.10.1998
>
> That is old enough (Win98SE) never to have been modified by an update.
> So, extract it with SFC.
>
> (1) "START button, Run, SFC"
> (2) Bolt "Extract one file from installation disk"
> (3) Enter "RUNDLL32.EXE" in the "Specify..." box.
> (4) Click "Start". It should offer to "Save file in C:\WINDOWS".
> If not, make it so.
> (5) In "Restore from", if not already pre-filled, browse to
> (a) Installation CD (likely the Win98 folder) or
> (b) The folder that has your cabs on the hard drive, likely
> "C:\WINDOWS\options\cabs\".
> (5) Click "OK"
>
> If it discovers the file already exists, it will offer to back it up.
> May as well do so. If it discovers the file is "in use", it will request
> that you reboot to complete the install.
>
> | RUNDLL32 caused a general protection fault
> | in module SETUPX.DLL at 0006:00000053.
> | Registers:
> | EAX=00000018 CS=2b0f EIP=00000053 EFLGS=00000206
> | EBX=00000012 SS=2bef ESP=00007d38 EBP=00007d42
> | ECX=00000000 DS=2a2f ESI=000202c0 FS=0000
> | EDX=00000000 ES=0000 EDI=000002c0 GS=0000
> | Bytes at CS:EIP:
> | 26 ff 74 12 9a 2b 50 af 17 8e 46 08 26 83 7c 14
> | Stack dump:
> | d8182a2f 00000000 7d4e0018 2b0f0127 00188fa4 7eeed818 2b1728a1
> | 37ced818 4ea440df 61754c98 7250206c 74617669 654e2065 726f7774
> | 676e696b 61644120
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp@netzero.net
>
>
>
 
P

PCR

dph wrote:
| Excellent assistance, worked perfectly.
| Thanks

You are welcome. Glad to hear it!

| "PCR" wrote:
|
|> "Dan" <Dan@discussions.microsoft.com> wrote in message
|> news:AE3501EA-9B46-4FFE-9BDF-10BE497AE7EA@microsoft.com
|> | Here is the error I received when updating my Microsoft Virtual
|> | Private Networking Driver in Microsoft Windows 98 Second Edition.
|> | What does anyone make of it? Thanks in advance for all the
|> | suggestions.
|>
|> Are you sure you are not irradiating the Win98 side again with
|> XP-drivers? I see nothing linking RUNDLL32 with SETUPX.DLL at...
|> http://search.support.microsoft.com/search/?adv=1&spid=1139 MSKB
|>
|> Here is how to replace SETUPX.DLL, if necessary...
|>
|> SETUPX.DLL
|> Desc: Windows Setup Functions
|> Loc: C:\WINDOWS\SYSTEM
|> Size: 745,168 bytes
|> Mod: Friday, April 23, 1999 10:22:00 PM
|> Ver: 4.10.2222
|>
|> That is old enough (in Win98SE) never to have been modified by an
|> update. So, extract it with SFC, if you can boot to Windows.
|>
|> (1) "START button, Run, SFC"
|> (2) Bolt "Extract one file from installation disk"
|> (3) Enter "SETUPX.DLL" in the "Specify..." box.
|> (4) Click "Start".
|> (5) It should offer to "Save file in C:\WINDOWS\SYSTEM".
|> If not, make it so.
|> (6) In "Restore from", if not already pre-filled, browse to
|> (a) Installation CD (likely the Win98 folder) or
|> (b) The folder that has your cabs on the hard drive, likely
|> "C:\WINDOWS\options\cabs\".
|> (7) Click "OK"
|>
|> If it discovers the file already exists, it will offer to back it up.
|> May as well do so. If it discovers the file is "in use", it will
|> request that you reboot to complete the install.
|>
|> If you cannot do it in Windows, do it in DOS, per the instructions
|> in... http://support.microsoft.com/kb/306618/en-us
|> Error Message When You Start Your Computer: Msgsrv32 Caused Segment
|> Not Present Fault in Module Setupx.dll
|>
|> And here is what a healthy Rundll32.exe should look like...!...
|>
|> RUNDLL32.EXE
|> Desc: Run a DLL as an App
|> Loc: C:\WINDOWS
|> Size: 24,576 bytes
|> Mod: Friday, April 23, 1999 10:22:00 PM
|> Ver: 4.10.1998
|>
|> That is old enough (Win98SE) never to have been modified by an
|> update. So, extract it with SFC.
|>
|> (1) "START button, Run, SFC"
|> (2) Bolt "Extract one file from installation disk"
|> (3) Enter "RUNDLL32.EXE" in the "Specify..." box.
|> (4) Click "Start". It should offer to "Save file in C:\WINDOWS".
|> If not, make it so.
|> (5) In "Restore from", if not already pre-filled, browse to
|> (a) Installation CD (likely the Win98 folder) or
|> (b) The folder that has your cabs on the hard drive, likely
|> "C:\WINDOWS\options\cabs\".
|> (5) Click "OK"
|>
|> If it discovers the file already exists, it will offer to back it up.
|> May as well do so. If it discovers the file is "in use", it will
|> request that you reboot to complete the install.
|>
|> | RUNDLL32 caused a general protection fault
|> | in module SETUPX.DLL at 0006:00000053.
|> | Registers:
|> | EAX=00000018 CS=2b0f EIP=00000053 EFLGS=00000206
|> | EBX=00000012 SS=2bef ESP=00007d38 EBP=00007d42
|> | ECX=00000000 DS=2a2f ESI=000202c0 FS=0000
|> | EDX=00000000 ES=0000 EDI=000002c0 GS=0000
|> | Bytes at CS:EIP:
|> | 26 ff 74 12 9a 2b 50 af 17 8e 46 08 26 83 7c 14
|> | Stack dump:
|> | d8182a2f 00000000 7d4e0018 2b0f0127 00188fa4 7eeed818 2b1728a1
|> | 37ced818 4ea440df 61754c98 7250206c 74617669 654e2065 726f7774
|> | 676e696b 61644120
|>
|> --
|> Thanks or Good Luck,
|> There may be humor in this post, and,
|> Naturally, you will not sue,
|> Should things get worse after this,
|> PCR
|> pcrrcp@netzero.net

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net
 
You must log in or register to reply here.
Back
Top Bottom