J
Jordan4501
I have a network setup like is shown in the diagram below. Clients on the LAN are automatically configured to route all internet traffic through "gateway.contoso.local", and this works nicely.
I am trying to set up a VPN server, but with a caveat: the client who connects to the VPN should be able to access the public internet, BUT they must access it through "gateway.contoso.local" like every other LAN client does (i.e. public IP should appear as 43.121.42.8). Basically, I've been able to get the VPN working with public internet access using Windows Server 2016 RRAS with VPN & NAT, but the VPN client accesses the internet through the VPN server (vpn.contoso.local), and the public IP appears as 43.121.38.10.
How can I configure RRAS to route all VPN client traffic destined for the public internet through the "Gateway" server?
Continue reading...
I am trying to set up a VPN server, but with a caveat: the client who connects to the VPN should be able to access the public internet, BUT they must access it through "gateway.contoso.local" like every other LAN client does (i.e. public IP should appear as 43.121.42.8). Basically, I've been able to get the VPN working with public internet access using Windows Server 2016 RRAS with VPN & NAT, but the VPN client accesses the internet through the VPN server (vpn.contoso.local), and the public IP appears as 43.121.38.10.
How can I configure RRAS to route all VPN client traffic destined for the public internet through the "Gateway" server?
Continue reading...