P
Paul Borb
Hi, I get blue screens of death daily few times a day randomly.
It can happen when watching youtube, gaming or when the computer doesn't do anything.
My specs:
Intel i5-4670k
MSI z87 g45 gaming
16GB RAM 4x4GB
Sapphire Radeon 280x dual-x 3GB
750w antec PSU
Most common stop code: IRQL_NOT_LESS_OR_EQUAL, but there were others.
There were some .sys files sometimes listed, other times no files.
Sometimes the BSOD doesn't finish to dump and the computer just restarts.
Things I tried to do:
Full format and reinstall of windows.
New PSU (changed it to a new one).
Run both p95 and furmark at the same time for sometime to see if power delivery is ok, everything was fine and the computer didn't crash.
A few times I got a TCPIP driver listed in the bsod, so -
New Ethernet card, disabled on-board card through BIOS.
All drivers are up to date.
Run memtest86, zero errors.
In-place upgrade.
Checked everything is seated properly on the motherboard.
Temperatures of all components, CPU and GPU included are fine. Under load of both p95 and furmark the temps are ok.
Any help or ideas would be appreciated, thank you.
EDIT: Just had another bsod with the error: Interrupt exception not handled.
minidump file added to shared folder.
Continue reading...
It can happen when watching youtube, gaming or when the computer doesn't do anything.
My specs:
Intel i5-4670k
MSI z87 g45 gaming
16GB RAM 4x4GB
Sapphire Radeon 280x dual-x 3GB
750w antec PSU
Most common stop code: IRQL_NOT_LESS_OR_EQUAL, but there were others.
There were some .sys files sometimes listed, other times no files.
Sometimes the BSOD doesn't finish to dump and the computer just restarts.
Things I tried to do:
Full format and reinstall of windows.
New PSU (changed it to a new one).
Run both p95 and furmark at the same time for sometime to see if power delivery is ok, everything was fine and the computer didn't crash.
A few times I got a TCPIP driver listed in the bsod, so -
New Ethernet card, disabled on-board card through BIOS.
All drivers are up to date.
Run memtest86, zero errors.
In-place upgrade.
Checked everything is seated properly on the motherboard.
Temperatures of all components, CPU and GPU included are fine. Under load of both p95 and furmark the temps are ok.
Any help or ideas would be appreciated, thank you.
EDIT: Just had another bsod with the error: Interrupt exception not handled.
minidump file added to shared folder.
Continue reading...