D
Dean Brighton
Hi,
This is really a complicated topic and I hope this is the correct form. I am having a problem with getting external NLB connectivity into the Hyper-v SDN network structure. I have deploye a network controller (FABNC) and Load Balancer (FABLB). In addition to this, I have also installed a RRAS edge router. Services are deployed and configured with VMM 2016 CU 1
1. The network controller is working and HNV Gen 2 is working. VMs deployed to virtual networks can communicate with other systems on the same virtual network across hosts etc. I am happy with this configured.
2. I have configured the SLB/MUX as a load balance VM in SCVMM
3. I have configured the edge RRAS router with BGP peering and can see the VIPs being discovered on the edge router.
When I connect to the VIP, I do not get any response. I have created a Web (tcp 80) template and deployed the VIP using SCCM. I can see the VIP and LB configuration in the diagnotics json and everything looks ok. I have checked that the host can communicate back to the calling VM IP address for direct return.
What am I missing?
Dean
Continue reading...
This is really a complicated topic and I hope this is the correct form. I am having a problem with getting external NLB connectivity into the Hyper-v SDN network structure. I have deploye a network controller (FABNC) and Load Balancer (FABLB). In addition to this, I have also installed a RRAS edge router. Services are deployed and configured with VMM 2016 CU 1
1. The network controller is working and HNV Gen 2 is working. VMs deployed to virtual networks can communicate with other systems on the same virtual network across hosts etc. I am happy with this configured.
2. I have configured the SLB/MUX as a load balance VM in SCVMM
3. I have configured the edge RRAS router with BGP peering and can see the VIPs being discovered on the edge router.
When I connect to the VIP, I do not get any response. I have created a Web (tcp 80) template and deployed the VIP using SCCM. I can see the VIP and LB configuration in the diagnotics json and everything looks ok. I have checked that the host can communicate back to the calling VM IP address for direct return.
What am I missing?
Dean
Continue reading...
