J
JustdaveIT
Hi All,
I have a Windows server 2012 R2 core server running Hyper-v with iSCSI attachments. Many months ago I configured the iSCSI connections and everything was working fine. I recently went to add an additional connection however when i opened the iSCSI initiator interface i noticed under the 'Targets' tab the 'Discovered Targets' section was completely empty. The 'Discovery' tab had a portal pointing to our san, both the 'Favourite Targets' and 'Volumes & Devices' tabs were also blank.
I attempted to use the quick connect to connect to our SAN to see if this might resolve the issue however i received the following in the progress report section:
'The GUID passed was not recognized as valid by a WMI data provider.'
All existing iSCSI disk attachments are still present and all VM's are working fine. I am at a loss as to where to go from here, any help would be greatly appreciated.
Continue reading...
I have a Windows server 2012 R2 core server running Hyper-v with iSCSI attachments. Many months ago I configured the iSCSI connections and everything was working fine. I recently went to add an additional connection however when i opened the iSCSI initiator interface i noticed under the 'Targets' tab the 'Discovered Targets' section was completely empty. The 'Discovery' tab had a portal pointing to our san, both the 'Favourite Targets' and 'Volumes & Devices' tabs were also blank.
I attempted to use the quick connect to connect to our SAN to see if this might resolve the issue however i received the following in the progress report section:
'The GUID passed was not recognized as valid by a WMI data provider.'
All existing iSCSI disk attachments are still present and all VM's are working fine. I am at a loss as to where to go from here, any help would be greatly appreciated.
Continue reading...