System crash after install SP2 on SBS

[zulsystems@gmail.com]

Hi!!

When I install the SP2 on my Small Business Server 2003, the
instalation process give me an error and undo the instalation. Then I
restart the server and after the logo of Windows 2003, when is
switching to next screen (windows screen with the message 'applying
computer' setting and log in) the system give me a blue screen without
any message (only with the typical message that may be it's a hardware
problem bla bla bla).

If I try to open Safe Mode or Last Know Good Configuration I have the
same problem. It's possible to use the System Restore Point if I
cannot access to a command prompt?

What can I do, please?

I would appreciate your comments very very much.

Thanks,
Pop

 

[Robert L [MVP - Networking]]

You may try to Use Windows Preinstallation Environment or a parallel installation on the system to gain access. This article may help,

When you restart Windows Server 2003, the computer may display a ...When you restart Windows Server 2003, the computer may display a gray screen or may appear to stop responding. The computer may respond to a ping command. ...
support.microsoft.com/kb/924995


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
<zulsystems@gmail.com> wrote in message news:1184268753.147018.230450@r34g2000hsd.googlegroups.com...
Hi!!

When I install the SP2 on my Small Business Server 2003, the
instalation process give me an error and undo the instalation. Then I
restart the server and after the logo of Windows 2003, when is
switching to next screen (windows screen with the message 'applying
computer' setting and log in) the system give me a blue screen without
any message (only with the typical message that may be it's a hardware
problem bla bla bla).

If I try to open Safe Mode or Last Know Good Configuration I have the
same problem. It's possible to use the System Restore Point if I
cannot access to a command prompt?

What can I do, please?

I would appreciate your comments very very much.

Thanks,
Pop

 

[zulsystems@gmail.com]

Thank you for your post, but I don't want to gain access to the system
to access the data (because I have a backup copy), I want not to
format and reinstall and configurate all the programs in my server.

If I can access to my server files with a parallel instalation, what
can I do?

Regards,
Rene

On Jul 12, 9:47 pm, "Robert L [MVP - Networking]"
<nore...@hotmail.com> wrote:
> You may try to Use Windows Preinstallation Environment or a parallel installation on the system to gain access. This article may help,
>
> When you restart Windows Server 2003, the computer may display a ...When you restart Windows Server 2003, the computer may display a gray screen or may appear to stop responding. The computer may respond to a ping command. ...
> support.microsoft.com/kb/924995
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting onhttp://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access onhttp://www.HowToNetworking.com <zulsyst...@gmail.com> wrote in messagenews:1184268753.147018.230450@r34g2000hsd.googlegroups.com...
>
> Hi!!
>
> When I install the SP2 on my Small Business Server 2003, the
> instalation process give me an error and undo the instalation. Then I
> restart the server and after the logo of Windows 2003, when is
> switching to next screen (windows screen with the message 'applying
> computer' setting and log in) the system give me a blue screen without
> any message (only with the typical message that may be it's a hardware
> problem bla bla bla).
>
> If I try to open Safe Mode or Last Know Good Configuration I have the
> same problem. It's possible to use the System Restore Point if I
> cannot access to a command prompt?
>
> What can I do, please?
>
> I would appreciate your comments very very much.
>
> Thanks,
> Pop