V
Vog110
Hello!
I am having issues doing a clean install of Windows 10 to a new build PC with an onboard m2 card.
Once completed on first boot it goes into a loop sequence with an BSOD which diasappears too quickly to read the error report. On checking SRTTrail.txt it appears I have the following errors;
Root cause found:
---------------------------
Unspecified changes to system configuration might have caused the problem.
Repair action:
Result: Failed. Error code = 0x32
Time taken = 94 ms
Repair action: System files integrity check and repair
Result: Failed. Error code = 0x57
Time taken = 922 ms.
I have done everything conceivable to correct this to no avail including:
checkdisc (from EaseUS utility)
scannow for system files
completely wiped and cleaned SSD prior to install using command line
install from ISO download onto USB
cloned OS from known good install
system is custom; ASUS b-350ME board, 16gb RAm, Ryzen 5 2400, Samsung 970 EVO 250gb M.2 ssd
Continue reading...
I am having issues doing a clean install of Windows 10 to a new build PC with an onboard m2 card.
Once completed on first boot it goes into a loop sequence with an BSOD which diasappears too quickly to read the error report. On checking SRTTrail.txt it appears I have the following errors;
Root cause found:
---------------------------
Unspecified changes to system configuration might have caused the problem.
Repair action:
Result: Failed. Error code = 0x32
Time taken = 94 ms
Repair action: System files integrity check and repair
Result: Failed. Error code = 0x57
Time taken = 922 ms.
I have done everything conceivable to correct this to no avail including:
checkdisc (from EaseUS utility)
scannow for system files
completely wiped and cleaned SSD prior to install using command line
install from ISO download onto USB
cloned OS from known good install
system is custom; ASUS b-350ME board, 16gb RAm, Ryzen 5 2400, Samsung 970 EVO 250gb M.2 ssd
Continue reading...