Timesync issues on PDC

P

PiboT

Hello,

I'm running on my PDC this command

w32tm /config /manualpeerlist:"0.be.pool.ntp.org,0x1 1.be.pool.ntp.org,0x1 2.be.pool.ntp.org,0x1" /syncfromflags:manual /reliable:yes /update

followed by

net stop w32time
w32tm /unregister
w32tm /register
net start w32time

When i'm asking the configuration I'm getting this output:

w32tm /query /configuration

[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 10 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 172800 (Local)
MaxPosPhaseCorrection: 172800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)

[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.DLL (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Local)
ResolvePeerBackoffMaxTimes: 7 (Local)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 1 (Local)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Local)
Type: NTP (Local)
NtpServer: 1.be.pool.ntp.org 2.be.pool.ntp.org 3.be.pool.ntp.org (Local)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.DLL (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)



w32tm /query /peers

#Peers: 9
Peer: 1.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 1.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 1.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 1.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 3.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 3.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 3.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 3.be.pool.ntp.org
State: Active
Time Remaining: 1.3372097s
Mode: 1 (Symmetric Active)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 5 (32s)
Peer: 2.be.pool.ntp.org
State: Pending
Time Remaining: 868.3056905s
Mode: 0 (reserved)
Stratum: 0 (unspecified)
PeerPoll Interval: 0 (unspecified)
HostPoll Interval: 0 (unspecified)





w32tm /query /source
Local CMOS Clock


w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.


What is going wrong?????
I've added the manualpeerlist but the server isn't remembering them!

Settings in register:

1495822.png



1495823.png

1495825.png





--- A computer is like a woman, once you think you have figured out something, always surprised to find that there is something else! ---

Continue reading...
 

Similar threads

S
Replies
0
Views
461
St_Marcel
S
R
Replies
0
Views
289
RackGL
R
S
Replies
0
Views
670
Surendra Kumar V
S
Back
Top Bottom