I
ionstar741l
If your trying to do a Clean Windows installation Via USB And You cannot Get passed "expanding Windows Files" Part of the installation You Might have A bad Windows boot (ISD ISO). To get a clean working ISO on to ur USB Make sure Your Factory Reset The USB To FAT32, And is showing The correct Storage amount on Your USB (You might have to try Multiple Times For windows to show to show ur The correct storage amount). Install Windows Media Creation Tool From the official Microsoft Website. Run The Media Creation Tool (The application Is slow be patient!) "Select Create installation Media" (usb flash drive, DVD Or file ISO file For Another PC, click next.
Uncheck "use the recommended options for this pc", IF you have less 4 GB Of ram, (2 GB of ram) Make sure the Architecture Is set to 32-bit!.
NOW! Instead of Creating a the Boot image to ur usb select, "ISO file, Don't worry You Don`t need a DVD drive.
Be Extremely patient As this will take 5 hours depending on ur USB and internet It may look like its stuck but don't stop the installation (i would recommend Setting ur pc to never sleep IF Your installing the ISO and Ur about to go to bed Setting/Sytem/power and sleep options.
Once ur iso Installation is complete Download This application--> Rufus
make sure to select the Portable Version.
Once it is installed run it as a Administrator.
Once it is installed Click on select And find ur ISO file, The icon of the file is a "CD" (file name: "windows" And click "open and make sure the Partition scheme is set to GPT And ur Target Sytem to UEFI (Non CSM) Then click start And wait until Ur ISO is converted to a bootable image.
Once it is installed Plug ur USB onto ur Laptop/pc And then boot from the USB as u normally do.once you get to the install window Press: (Shift F10) A command Prompt Should Appear, Type the following:
Diskpart
List disk
Select disk 0
clean
(Make sure to type each command seprately!)
If the problem still occurres Redo the Steps But in Rufus Instead of Setting the Partition scheme to GPT Select MBR.
Continue reading...
Uncheck "use the recommended options for this pc", IF you have less 4 GB Of ram, (2 GB of ram) Make sure the Architecture Is set to 32-bit!.
NOW! Instead of Creating a the Boot image to ur usb select, "ISO file, Don't worry You Don`t need a DVD drive.
Be Extremely patient As this will take 5 hours depending on ur USB and internet It may look like its stuck but don't stop the installation (i would recommend Setting ur pc to never sleep IF Your installing the ISO and Ur about to go to bed Setting/Sytem/power and sleep options.
Once ur iso Installation is complete Download This application--> Rufus
make sure to select the Portable Version.
Once it is installed run it as a Administrator.
Once it is installed Click on select And find ur ISO file, The icon of the file is a "CD" (file name: "windows" And click "open and make sure the Partition scheme is set to GPT And ur Target Sytem to UEFI (Non CSM) Then click start And wait until Ur ISO is converted to a bootable image.
Once it is installed Plug ur USB onto ur Laptop/pc And then boot from the USB as u normally do.once you get to the install window Press: (Shift F10) A command Prompt Should Appear, Type the following:
Diskpart
List disk
Select disk 0
clean
(Make sure to type each command seprately!)
If the problem still occurres Redo the Steps But in Rufus Instead of Setting the Partition scheme to GPT Select MBR.
Continue reading...