T
Timedelay
I hope someone can help with the following issues.
I am getting the message ‘No AMD graphics driver is installed, or the AMD driver is not
functioning properly. Please install the AMD driver appropriate for your AMD hardware.’
This is preventing my graphics card to run, AMD software to run and some of my apps are displaying in minimum screen size and will not maximise.
I have tried uninstalling the AMD driver and software installed for my graphic card ‘AMD Radeon R7 200 Series driver - Sapphire Radeon R7 240 with Boost Gr’, after which I have booted up to safe mode and run DDU, then cleaned the registry. I then installed the latest version of AMD software from the full download, without success. The same message was displayed.
I then tried uninstalling AMD again rebooting in to safe mode, and using amdcleanuputility.exe, to clear installed AMD driver files and registry entries’ left over.
I then installed the recommended software ‘win10-radeon-software-adrenalin-2020-edition-19.12.2-dec12’. But I still get the same message.
I’ve also tried reinstalling older versions of AMD.
Following advice I have created the folders TileDataLayer\Database\ in C:\WINDOWS\system32\config\systemprofile\AppData\Local\TileDataLayer\Database\. The files should have been in there were automatically created. I did a reboot to be sure it registered, but unfortunately I am still getting the same message.
I have run several diagnostics
DxDiag
There is a problem with AMD Radeon R7 200 Series device. For more information, search for “graphics device driver error code 52”.
Another error message received:
Windows cannnot find C:/Program Files\AMD\CIMBin64\InstallManagerAPP.exe'. Make sure you've typed the name correctly, then try again.
I also received the following error:
Update Drivers - AMD Radeon R7 200 Series
Windows encountered a problem installing the drivers for your device Windows found drivers for your device but encountered an error while attempting to install them. ‘ AMD Radeon R7 200 Series
Windows cannot verify the digital signature for the drivers required for this device. A recent
hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
If you know the manufacturer of your device, you can visit their website and check the support section for drivers.
I ran:
sfc /scannow – and received no errors
I did another installation of a recommended version and did a factory reset. Still I get the same message.
I have checked the Even View and Event Log Explorer and get quite a number of errors in various folders. I followed this up by searching for the error on the internet without any success.
One of the errors under Device Manager, was:
‘Device PCl\VEN_1002&DEV_6613&SUBSYS_E263174B&REV_00\4&3834d97&0&0008 had a problem starting.’
I even clicked on Event Log on-line help – what help?
I’ve searched the internet for help, sent a message to AMD and AMD forum. I did get a reply from the forum and a suggestion (TileDataLayer\Database\), this did populate the folder with files, but did not allow AMD software to work or allow the graphic card to be activated in Device Manager, and I continued to get the same error message.
I am running Windows 10 version 1903 (OS Build 18.362.592)
System:
Desktop
Operating System: Windows 10 Pro 64-bit (10.0, Build 18362) (18362.19h1_release.190318-1202)
System Motherboard: Asus Z97-K/USB 3.1 S1150 Intel Z97 DDR3 USB3.1 ATX F6M0AJ107487
Processor: Intel Core I5 4690k - 3.5 Ghz - 4 Cores - 4 Thread Batch CM8064601710803
Graphics Card: Sapphire Radeon R7 240 With Boost Graphics Card - Radeon R7 240 - 4 GB
Power Supply Unit: CIT/PSU/017 CiT 550W Black Edition PSU 12cm Dual 12v CE PFC Model 550UB Batch 550UB
Hard Disk: Seagate Barracuda 1TB SATA3 3.5"
Monitor: Samsung SyncMaster 2243
All Drivers are up-to-date via DriverBooster 7
System Model: All Series
BIOS: 0702 (type: UEFI)
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 2801MB used, 15954MB available
DirectX Version: DirectX 12
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DxDiag Version: 10.00.18362.0387 64bit Unicode
Describe your system:
· Driver version installed
o E.g. Radeon Software Crimson Edition 15.12
· Display Devices
o Make and model, connection/adapter in use, resolution and refresh rate; e.g. Samsung UE32850R 3840x2160 @60Hz Active DP to HDMI adapter
o One line for each display device connected
· Motherboard
o Make and model; e.g. Asus P8P67 Deluxe
· CPU/APU
o Make and model number; e.g. FX 9590
· Power Supply Unit Make, Model & Wattage
o E.g. Thermaltake TR2 700W Gold
If anyone can assist with this I would be most grateful, if not I would have no other alternative but to go for a clean install of Windows.
Many thanks
Continue reading...
I am getting the message ‘No AMD graphics driver is installed, or the AMD driver is not
functioning properly. Please install the AMD driver appropriate for your AMD hardware.’
This is preventing my graphics card to run, AMD software to run and some of my apps are displaying in minimum screen size and will not maximise.
I have tried uninstalling the AMD driver and software installed for my graphic card ‘AMD Radeon R7 200 Series driver - Sapphire Radeon R7 240 with Boost Gr’, after which I have booted up to safe mode and run DDU, then cleaned the registry. I then installed the latest version of AMD software from the full download, without success. The same message was displayed.
I then tried uninstalling AMD again rebooting in to safe mode, and using amdcleanuputility.exe, to clear installed AMD driver files and registry entries’ left over.
I then installed the recommended software ‘win10-radeon-software-adrenalin-2020-edition-19.12.2-dec12’. But I still get the same message.
I’ve also tried reinstalling older versions of AMD.
Following advice I have created the folders TileDataLayer\Database\ in C:\WINDOWS\system32\config\systemprofile\AppData\Local\TileDataLayer\Database\. The files should have been in there were automatically created. I did a reboot to be sure it registered, but unfortunately I am still getting the same message.
I have run several diagnostics
DxDiag
There is a problem with AMD Radeon R7 200 Series device. For more information, search for “graphics device driver error code 52”.
Another error message received:
Windows cannnot find C:/Program Files\AMD\CIMBin64\InstallManagerAPP.exe'. Make sure you've typed the name correctly, then try again.
I also received the following error:
Update Drivers - AMD Radeon R7 200 Series
Windows encountered a problem installing the drivers for your device Windows found drivers for your device but encountered an error while attempting to install them. ‘ AMD Radeon R7 200 Series
Windows cannot verify the digital signature for the drivers required for this device. A recent
hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
If you know the manufacturer of your device, you can visit their website and check the support section for drivers.
I ran:
sfc /scannow – and received no errors
I did another installation of a recommended version and did a factory reset. Still I get the same message.
I have checked the Even View and Event Log Explorer and get quite a number of errors in various folders. I followed this up by searching for the error on the internet without any success.
One of the errors under Device Manager, was:
‘Device PCl\VEN_1002&DEV_6613&SUBSYS_E263174B&REV_00\4&3834d97&0&0008 had a problem starting.’
I even clicked on Event Log on-line help – what help?
I’ve searched the internet for help, sent a message to AMD and AMD forum. I did get a reply from the forum and a suggestion (TileDataLayer\Database\), this did populate the folder with files, but did not allow AMD software to work or allow the graphic card to be activated in Device Manager, and I continued to get the same error message.
I am running Windows 10 version 1903 (OS Build 18.362.592)
System:
Desktop
Operating System: Windows 10 Pro 64-bit (10.0, Build 18362) (18362.19h1_release.190318-1202)
System Motherboard: Asus Z97-K/USB 3.1 S1150 Intel Z97 DDR3 USB3.1 ATX F6M0AJ107487
Processor: Intel Core I5 4690k - 3.5 Ghz - 4 Cores - 4 Thread Batch CM8064601710803
Graphics Card: Sapphire Radeon R7 240 With Boost Graphics Card - Radeon R7 240 - 4 GB
Power Supply Unit: CIT/PSU/017 CiT 550W Black Edition PSU 12cm Dual 12v CE PFC Model 550UB Batch 550UB
Hard Disk: Seagate Barracuda 1TB SATA3 3.5"
Monitor: Samsung SyncMaster 2243
All Drivers are up-to-date via DriverBooster 7
System Model: All Series
BIOS: 0702 (type: UEFI)
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 2801MB used, 15954MB available
DirectX Version: DirectX 12
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DxDiag Version: 10.00.18362.0387 64bit Unicode
Describe your system:
· Driver version installed
o E.g. Radeon Software Crimson Edition 15.12
· Display Devices
o Make and model, connection/adapter in use, resolution and refresh rate; e.g. Samsung UE32850R 3840x2160 @60Hz Active DP to HDMI adapter
o One line for each display device connected
· Motherboard
o Make and model; e.g. Asus P8P67 Deluxe
· CPU/APU
o Make and model number; e.g. FX 9590
· Power Supply Unit Make, Model & Wattage
o E.g. Thermaltake TR2 700W Gold
If anyone can assist with this I would be most grateful, if not I would have no other alternative but to go for a clean install of Windows.
Many thanks
Continue reading...