Q
Quizzzard
I recently used the media creation tool to update a computer to Windows 10 (Build 18363). The model is a Dell Optiplex 3020, Core13-4130. About a day later, I began receiving BSODs.
This is one of the latest dump files:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a39ffe60a2b8d541, Reserved
Arg2: b3b70ae6f53972ce, Reserved
Arg3: ffffbf0811ea50d0, Failure type dependent information
Arg4: 000000000000001c, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
8 : Object type
9 : A processor IVT
a : Modification of a system service function
b : A generic session data region
c : Modification of a session function or .pdata
d : Modification of an import table
e : Modification of a session import table
f : Ps Win32 callout modification
10 : Debug switch routine modification
11 : IRP allocator modification
12 : Driver call dispatcher modification
13 : IRP completion dispatcher modification
14 : IRP deallocator modification
15 : A processor control register
16 : Critical floating point control register modification
17 : Local APIC modification
18 : Kernel notification callout modification
19 : Loaded module list modification
1a : Type 3 process list corruption
1b : Type 4 process list corruption
1c : Driver object corruption
1d : Executive callback object modification
1e : Modification of module padding
1f : Modification of a protected process
20 : A generic data region
21 : A page hash mismatch
22 : A session page hash mismatch
23 : Load config directory modification
24 : Inverted function table modification
25 : Session configuration modification
26 : An extended processor control register
27 : Type 1 pool corruption
28 : Type 2 pool corruption
29 : Type 3 pool corruption
2a : Type 4 pool corruption
2b : Modification of a function or .pdata
2c : Image integrity corruption
2d : Processor misconfiguration
2e : Type 5 process list corruption
2f : Process shadow corruption
30 : Retpoline code page corruption
101 : General pool corruption
102 : Modification of win32k.sys
Debugging Details:
------------------
*** WARNING: Unable to verify checksum for win32k.sys
KEY_VALUES_STRING: 1
Key : Analysis.CPU.Sec
Value: 4
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on CYNTHIA-PC
Key : Analysis.DebugData
Value: CreateObject
Key : Analysis.DebugModel
Value: CreateObject
Key : Analysis.Elapsed.Sec
Value: 5
Key : Analysis.Memory.CommitPeak.Mb
Value: 67
Key : Analysis.System
Value: CreateObject
ADDITIONAL_XML: 1
BUGCHECK_CODE: 109
BUGCHECK_P1: a39ffe60a2b8d541
BUGCHECK_P2: b3b70ae6f53972ce
BUGCHECK_P3: ffffbf0811ea50d0
BUGCHECK_P4: 1c
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
STACK_TEXT:
ffff8584`67652e98 00000000`00000000 : 00000000`00000109 a39ffe60`a2b8d541 b3b70ae6`f53972ce ffffbf08`11ea50d0 : nt!KeBugCheckEx
SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
MODULE_NAME: Unknown_Module
IMAGE_NAME: Unknown_Image
STACK_COMMAND: .thread ; .cxr ; kb
FAILURE_BUCKET_ID: BAD_STACK_0x109
OS_VERSION: 10.0.18362.1
BUILDLAB_STR: 19h1_release
OSPLATFORM_TYPE: x64
OSNAME: Windows 10
FAILURE_ID_HASH: {b4d7023a-05c3-49b2-3ea4-6240fe57d90e}
Followup: MachineOwner
---------
3: kd> !blackboxbsd
Stream size mismatch (expected = 176, read = 168)
3: kd> !blackboxntfs
NTFS Blackbox Data
0 Slow I/O Timeout Records Found
0 Oplock Break Timeout Records Found
Can someone tell me if this is fixable without a clean install? If so, how?
Continue reading...
This is one of the latest dump files:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a39ffe60a2b8d541, Reserved
Arg2: b3b70ae6f53972ce, Reserved
Arg3: ffffbf0811ea50d0, Failure type dependent information
Arg4: 000000000000001c, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
8 : Object type
9 : A processor IVT
a : Modification of a system service function
b : A generic session data region
c : Modification of a session function or .pdata
d : Modification of an import table
e : Modification of a session import table
f : Ps Win32 callout modification
10 : Debug switch routine modification
11 : IRP allocator modification
12 : Driver call dispatcher modification
13 : IRP completion dispatcher modification
14 : IRP deallocator modification
15 : A processor control register
16 : Critical floating point control register modification
17 : Local APIC modification
18 : Kernel notification callout modification
19 : Loaded module list modification
1a : Type 3 process list corruption
1b : Type 4 process list corruption
1c : Driver object corruption
1d : Executive callback object modification
1e : Modification of module padding
1f : Modification of a protected process
20 : A generic data region
21 : A page hash mismatch
22 : A session page hash mismatch
23 : Load config directory modification
24 : Inverted function table modification
25 : Session configuration modification
26 : An extended processor control register
27 : Type 1 pool corruption
28 : Type 2 pool corruption
29 : Type 3 pool corruption
2a : Type 4 pool corruption
2b : Modification of a function or .pdata
2c : Image integrity corruption
2d : Processor misconfiguration
2e : Type 5 process list corruption
2f : Process shadow corruption
30 : Retpoline code page corruption
101 : General pool corruption
102 : Modification of win32k.sys
Debugging Details:
------------------
*** WARNING: Unable to verify checksum for win32k.sys
KEY_VALUES_STRING: 1
Key : Analysis.CPU.Sec
Value: 4
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on CYNTHIA-PC
Key : Analysis.DebugData
Value: CreateObject
Key : Analysis.DebugModel
Value: CreateObject
Key : Analysis.Elapsed.Sec
Value: 5
Key : Analysis.Memory.CommitPeak.Mb
Value: 67
Key : Analysis.System
Value: CreateObject
ADDITIONAL_XML: 1
BUGCHECK_CODE: 109
BUGCHECK_P1: a39ffe60a2b8d541
BUGCHECK_P2: b3b70ae6f53972ce
BUGCHECK_P3: ffffbf0811ea50d0
BUGCHECK_P4: 1c
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
STACK_TEXT:
ffff8584`67652e98 00000000`00000000 : 00000000`00000109 a39ffe60`a2b8d541 b3b70ae6`f53972ce ffffbf08`11ea50d0 : nt!KeBugCheckEx
SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
MODULE_NAME: Unknown_Module
IMAGE_NAME: Unknown_Image
STACK_COMMAND: .thread ; .cxr ; kb
FAILURE_BUCKET_ID: BAD_STACK_0x109
OS_VERSION: 10.0.18362.1
BUILDLAB_STR: 19h1_release
OSPLATFORM_TYPE: x64
OSNAME: Windows 10
FAILURE_ID_HASH: {b4d7023a-05c3-49b2-3ea4-6240fe57d90e}
Followup: MachineOwner
---------
3: kd> !blackboxbsd
Stream size mismatch (expected = 176, read = 168)
3: kd> !blackboxntfs
NTFS Blackbox Data
0 Slow I/O Timeout Records Found
0 Oplock Break Timeout Records Found
Can someone tell me if this is fixable without a clean install? If so, how?
Continue reading...