C
CVCC600
I have been trying over and over to upgrade several systems of different but simular hardware types and i cannot get past the first boot phase error. i have tried countless suggestions. i also have been trying the "secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose" but i constantly get access denied on each " Error setting security on machine\software\classes.
Warning 5: Access is denied."
so i cant get that done. i am at a loss of how to get this upgrade to go through, but a clean install is very expensive since the vendor which we use charges us $1000s to set back up, and during this time where we have no money coming in it would be fantastic. below is the setupdiag, and assistance to get this upgrade going would be much appreciated.
Matching Profile found: FindRollbackFailure - 3A43C9B5-05B3-4F7C-A955-88F991BB5A48
SetupDiag version: 1.6.0.0
System Information:
Machine Name = OMNI-BOX
Manufacturer = LENOVO
Model = 30AH004MCA
HostOSArchitecture = 1033
FirmwareType = PCAT
BiosReleaseDate = 20191224000000.000000+000
BiosVendor = LENOVO BIOS Rev: FBKTDBA 0.0
BiosVersion = FBKTDBAUS
HostOSVersion = 6.1.7601
HostOSBuildString = 7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707
TargetOSBuildString = 10.0.18362.590 (19h1_release_svc_prod1.191209-1753)
HostOSLanguageId =
HostOSEdition = Professional
RegisteredAV =
FilterDrivers = FileInfo
UpgradeStartTime = 3/23/2020 2:01:39 PM
UpgradeEndTime = 3/23/2020 3:21:43 PM
UpgradeElapsedTime = 01:20:04
CV = k2op2iCVbUO+o4zF
ReportId =
Error: SetupDiag reports rollback failure found.
Last Phase = Pre First Boot
Last Operation = Upgrade security
Error = 0x800704B8-0x3001A
LogEntry: 2020-03-23 15:21:43, Error SP Cannot apply the security template for the new OS. Error: 0x800704B8
Refer to "System Error Codes - Win32 apps" for error information.
Last Setup Phase:
Phase Name: Pre First Boot
Phase Started: 3/23/2020 3:21:39 PM
Phase Ended: 1/1/0001 12:00:00 AM
Phase Time Delta: 00:00:00
Completed Successfully? False
Last Setup Operation:
Operation Name: Upgrade security
Operation Started: 3/23/2020 3:21:40 PM
Operation Ended: 1/1/0001 12:00:00 AM
Operation Time Delta: 0:00:00:00.0000000
Completed Successfully? False
Matching Profile found: FindRollbackFailure - 3A43C9B5-05B3-4F7C-A955-88F991BB5A48
SetupDiag version: 1.6.0.0
System Information:
Machine Name = OMNI-BOX
Manufacturer = LENOVO
Model = 30AH004MCA
HostOSArchitecture = x64
FirmwareType = PCAT
BiosReleaseDate = 20191224000000.000000+000
BiosVendor = LENOVO BIOS Rev: FBKTDBA 0.0
BiosVersion = FBKTDBAUS
HostOSVersion = 6.1.7601
HostOSBuildString = 7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707
TargetOSBuildString = 10.0.18362.590 (19h1_release_svc_prod1.191209-1753)
HostOSLanguageId =
HostOSEdition = Professional
RegisteredAV =
FilterDrivers = FileInfo
UpgradeStartTime = 3/23/2020 2:01:39 PM
UpgradeEndTime = 3/23/2020 3:21:43 PM
UpgradeElapsedTime = 01:20:04
CV = k2op2iCVbUO+o4zF
ReportId =
Error: SetupDiag reports rollback failure found.
Last Phase = Pre First Boot
Last Operation = Upgrade security
Error = 0x800704B8-0x3001A
LogEntry: 2020-03-23 15:21:43, Error SP Cannot apply the security template for the new OS. Error: 0x800704B8
Refer to "System Error Codes - Win32 apps" for error information.
Last Setup Phase:
Phase Name: Pre First Boot
Phase Started: 3/23/2020 3:21:39 PM
Phase Ended: 1/1/0001 12:00:00 AM
Phase Time Delta: 00:00:00
Completed Successfully? False
Last Setup Operation:
Operation Name: Upgrade security
Operation Started: 3/23/2020 3:21:40 PM
Operation Ended: 1/1/0001 12:00:00 AM
Operation Time Delta: 0:00:00:00.0000000
Completed Successfully? False
Continue reading...
Warning 5: Access is denied."
so i cant get that done. i am at a loss of how to get this upgrade to go through, but a clean install is very expensive since the vendor which we use charges us $1000s to set back up, and during this time where we have no money coming in it would be fantastic. below is the setupdiag, and assistance to get this upgrade going would be much appreciated.
Matching Profile found: FindRollbackFailure - 3A43C9B5-05B3-4F7C-A955-88F991BB5A48
SetupDiag version: 1.6.0.0
System Information:
Machine Name = OMNI-BOX
Manufacturer = LENOVO
Model = 30AH004MCA
HostOSArchitecture = 1033
FirmwareType = PCAT
BiosReleaseDate = 20191224000000.000000+000
BiosVendor = LENOVO BIOS Rev: FBKTDBA 0.0
BiosVersion = FBKTDBAUS
HostOSVersion = 6.1.7601
HostOSBuildString = 7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707
TargetOSBuildString = 10.0.18362.590 (19h1_release_svc_prod1.191209-1753)
HostOSLanguageId =
HostOSEdition = Professional
RegisteredAV =
FilterDrivers = FileInfo
UpgradeStartTime = 3/23/2020 2:01:39 PM
UpgradeEndTime = 3/23/2020 3:21:43 PM
UpgradeElapsedTime = 01:20:04
CV = k2op2iCVbUO+o4zF
ReportId =
Error: SetupDiag reports rollback failure found.
Last Phase = Pre First Boot
Last Operation = Upgrade security
Error = 0x800704B8-0x3001A
LogEntry: 2020-03-23 15:21:43, Error SP Cannot apply the security template for the new OS. Error: 0x800704B8
Refer to "System Error Codes - Win32 apps" for error information.
Last Setup Phase:
Phase Name: Pre First Boot
Phase Started: 3/23/2020 3:21:39 PM
Phase Ended: 1/1/0001 12:00:00 AM
Phase Time Delta: 00:00:00
Completed Successfully? False
Last Setup Operation:
Operation Name: Upgrade security
Operation Started: 3/23/2020 3:21:40 PM
Operation Ended: 1/1/0001 12:00:00 AM
Operation Time Delta: 0:00:00:00.0000000
Completed Successfully? False
Matching Profile found: FindRollbackFailure - 3A43C9B5-05B3-4F7C-A955-88F991BB5A48
SetupDiag version: 1.6.0.0
System Information:
Machine Name = OMNI-BOX
Manufacturer = LENOVO
Model = 30AH004MCA
HostOSArchitecture = x64
FirmwareType = PCAT
BiosReleaseDate = 20191224000000.000000+000
BiosVendor = LENOVO BIOS Rev: FBKTDBA 0.0
BiosVersion = FBKTDBAUS
HostOSVersion = 6.1.7601
HostOSBuildString = 7601.24545.amd64fre.win7sp1_ldr_escrow.200102-1707
TargetOSBuildString = 10.0.18362.590 (19h1_release_svc_prod1.191209-1753)
HostOSLanguageId =
HostOSEdition = Professional
RegisteredAV =
FilterDrivers = FileInfo
UpgradeStartTime = 3/23/2020 2:01:39 PM
UpgradeEndTime = 3/23/2020 3:21:43 PM
UpgradeElapsedTime = 01:20:04
CV = k2op2iCVbUO+o4zF
ReportId =
Error: SetupDiag reports rollback failure found.
Last Phase = Pre First Boot
Last Operation = Upgrade security
Error = 0x800704B8-0x3001A
LogEntry: 2020-03-23 15:21:43, Error SP Cannot apply the security template for the new OS. Error: 0x800704B8
Refer to "System Error Codes - Win32 apps" for error information.
Last Setup Phase:
Phase Name: Pre First Boot
Phase Started: 3/23/2020 3:21:39 PM
Phase Ended: 1/1/0001 12:00:00 AM
Phase Time Delta: 00:00:00
Completed Successfully? False
Last Setup Operation:
Operation Name: Upgrade security
Operation Started: 3/23/2020 3:21:40 PM
Operation Ended: 1/1/0001 12:00:00 AM
Operation Time Delta: 0:00:00:00.0000000
Completed Successfully? False
Continue reading...