Windows 2003 SP2 R2 and slow behavior of EXPLORER.EXE

D

Denis Lamothe

I am currently in the process of debugging 3 servers on one domain (2 DC and
a simple member server) all running on Windows 2003 SP2 R2.

I will explain the problem more in details... it all started when i
installed SP2 on the member server. Everything was working fine on all 3
servers before SP2. However, when i install SP2 on one of the servers, i am
getting slow behavior of EXPLORER.EXE getting so slow, that a window opened
becomes NOT RESPONDING... but, if i let it go for a couple of minutes, it
will eventually become active again. I also notice that hitting Start and
Program, the browsing of menu is slow... it's also slow when i Start, Run
and type in something.

All those servers are running mostly the same hardware, with 1 gig of
memory. If i uninstall SP2, it's all working very well again. When the
problem is present, i checked disk activity, cpu activity, memory activity
and everything is idle... memory usage is around 350-400mb so over 600mb is
still free. Server is not swapping. If i close EXPLORER.EXE the desktop
dissapear and when it comes back, it's fast again for a while, then it
starts again until it hangs again...

I destroyed my domain, and built it from scratch with 2003 R2 SP2 CD and
promoted my 2 DC's again and it's all up and running but still get the same
problem. It's virus free (got Symantec Enterprise v10 Server-Client
installed) and spyware free (no server has access to internet directly
anyway). All fix-packs and updates are installed and working. I have checked
the eventlog several times on all 3 servers, and nothing, there are no
errors and/or warnings about anything on them. Can anyone help me, i am
starting to regret to deploy SP2 on this domain cause it was all going
perfectly before this... now i am stuck with a slow EXPLORER.EXE on all 3
servers... which impacts any work done on those servers, either with
Terminal Server or on the console directly...

Anyone can help out?
 
K

Ken Zhao [MSFT]

Hello Denis,

Thank you for using newsgroup!

From your post, I'd like to suggest you refer to the following link and try
the suggestions to see if one of them can help:
Common Networking Issues After Applying Windows Server 2003 SP2 on SBS
http://blogs.technet.com/sbs/archive/2007/04/24/common-networking-issues-aft
er-applying-windows-server-2003-sp2-on-sbs.aspx

939421: Best practices and known issues when you install Windows Server
2003 Service Pack 2 on a Windows Small Business Server 2003-based computer
http://support.microsoft.com/?kbid=939421

Thanks & Regards,

Ken Zhao

Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security <http://www.microsoft.com/security>
====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.





--------------------
| From: "Denis Lamothe" <dlamothe@newsgroup.nospam>
| Subject: Windows 2003 SP2 R2 and slow behavior of EXPLORER.EXE
| Date: Tue, 17 Jul 2007 13:54:14 -0400
| Lines: 35
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3028
| X-RFC2646: Format=Flowed Original
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
| Message-ID: <Od#LntJyHHA.1204@TK2MSFTNGP03.phx.gbl>
| Newsgroups: microsoft.public.windows.server.general
| NNTP-Posting-Host: 64.86.141.133.wshs.cgi.ca 64.86.141.133
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP03.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.general:17433
| X-Tomcat-NG: microsoft.public.windows.server.general
|
| I am currently in the process of debugging 3 servers on one domain (2 DC
and
| a simple member server) all running on Windows 2003 SP2 R2.
|
| I will explain the problem more in details... it all started when i
| installed SP2 on the member server. Everything was working fine on all 3
| servers before SP2. However, when i install SP2 on one of the servers, i
am
| getting slow behavior of EXPLORER.EXE getting so slow, that a window
opened
| becomes NOT RESPONDING... but, if i let it go for a couple of minutes, it
| will eventually become active again. I also notice that hitting Start and
| Program, the browsing of menu is slow... it's also slow when i Start, Run
| and type in something.
|
| All those servers are running mostly the same hardware, with 1 gig of
| memory. If i uninstall SP2, it's all working very well again. When the
| problem is present, i checked disk activity, cpu activity, memory
activity
| and everything is idle... memory usage is around 350-400mb so over 600mb
is
| still free. Server is not swapping. If i close EXPLORER.EXE the desktop
| dissapear and when it comes back, it's fast again for a while, then it
| starts again until it hangs again...
|
| I destroyed my domain, and built it from scratch with 2003 R2 SP2 CD and
| promoted my 2 DC's again and it's all up and running but still get the
same
| problem. It's virus free (got Symantec Enterprise v10 Server-Client
| installed) and spyware free (no server has access to internet directly
| anyway). All fix-packs and updates are installed and working. I have
checked
| the eventlog several times on all 3 servers, and nothing, there are no
| errors and/or warnings about anything on them. Can anyone help me, i am
| starting to regret to deploy SP2 on this domain cause it was all going
| perfectly before this... now i am stuck with a slow EXPLORER.EXE on all 3
| servers... which impacts any work done on those servers, either with
| Terminal Server or on the console directly...
|
| Anyone can help out?
|
|
|
 
G

Greg O

On Jul 17, 10:54 am, "Denis Lamothe" <dlamo...@newsgroup.nospam>
wrote:
> I am currently in the process of debugging 3 servers on one domain (2 DC and
> a simple member server) all running on Windows 2003 SP2 R2.
>
> I will explain the problem more in details... it all started when i
> installed SP2 on the member server. Everything was working fine on all 3
> servers before SP2. However, when i install SP2 on one of the servers, i am
> getting slow behavior of EXPLORER.EXE getting so slow, that a window opened
> becomes NOT RESPONDING... but, if i let it go for a couple of minutes, it
> will eventually become active again. I also notice that hitting Start and
> Program, the browsing of menu is slow... it's also slow when i Start, Run
> and type in something.
>
> All those servers are running mostly the same hardware, with 1 gig of
> memory. If i uninstall SP2, it's all working very well again. When the
> problem is present, i checked disk activity, cpu activity, memory activity
> and everything is idle... memory usage is around 350-400mb so over 600mb is
> still free. Server is not swapping. If i close EXPLORER.EXE the desktop
> dissapear and when it comes back, it's fast again for a while, then it
> starts again until it hangs again...
>
> I destroyed my domain, and built it from scratch with 2003 R2 SP2 CD and
> promoted my 2 DC's again and it's all up and running but still get the same
> problem. It's virus free (got Symantec Enterprise v10 Server-Client
> installed) and spyware free (no server has access to internet directly
> anyway). All fix-packs and updates are installed and working. I have checked
> the eventlog several times on all 3 servers, and nothing, there are no
> errors and/or warnings about anything on them. Can anyone help me, i am
> starting to regret to deploy SP2 on this domain cause it was all going
> perfectly before this... now i am stuck with a slow EXPLORER.EXE on all 3
> servers... which impacts any work done on those servers, either with
> Terminal Server or on the console directly...
>
> Anyone can help out?

Perhaps just leave off SP2 for the time being, a lot of people are
having trouble with it.
 
K

Ken Zhao [MSFT]

Hi Denis,

I am just writing to see how everything is going. If you have any updates
or need any further assistance on this issue, please feel free to let me
know.

Thanks & Regards,

Ken Zhao

Microsoft Online Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security <http://www.microsoft.com/security>
====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.





--------------------
| X-Tomcat-ID: 79649031
| References: <Od#LntJyHHA.1204@TK2MSFTNGP03.phx.gbl>
| MIME-Version: 1.0
| Content-Type: text/plain
| Content-Transfer-Encoding: 7bit
| From: v-kzhao@online.microsoft.com ("Ken Zhao [MSFT]")
| Organization: Microsoft
| Date: Wed, 18 Jul 2007 06:23:00 GMT
| Subject: RE: Windows 2003 SP2 R2 and slow behavior of EXPLORER.EXE
| X-Tomcat-NG: microsoft.public.windows.server.general
| Message-ID: <96Q6lQQyHHA.4536@TK2MSFTNGHUB02.phx.gbl>
| Newsgroups: microsoft.public.windows.server.general
| Lines: 99
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.general:17466
| NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182
|
| Hello Denis,
|
| Thank you for using newsgroup!
|
| From your post, I'd like to suggest you refer to the following link and
try
| the suggestions to see if one of them can help:
| Common Networking Issues After Applying Windows Server 2003 SP2 on SBS
|
http://blogs.technet.com/sbs/archive/2007/04/24/common-networking-issues-aft
| er-applying-windows-server-2003-sp2-on-sbs.aspx
|
| 939421: Best practices and known issues when you install Windows Server
| 2003 Service Pack 2 on a Windows Small Business Server 2003-based computer
| http://support.microsoft.com/?kbid=939421
|
| Thanks & Regards,
|
| Ken Zhao
|
| Microsoft Online Support
| Microsoft Global Technical Support Center
|
| Get Secure! - www.microsoft.com/security
<http://www.microsoft.com/security>
| ====================================================
| When responding to posts, please "Reply to Group" via your newsreader so
| that others may learn and benefit from your issue.
| ====================================================
| This posting is provided "AS IS" with no warranties, and confers no
rights.
|
|
|
|
|
| --------------------
| | From: "Denis Lamothe" <dlamothe@newsgroup.nospam>
| | Subject: Windows 2003 SP2 R2 and slow behavior of EXPLORER.EXE
| | Date: Tue, 17 Jul 2007 13:54:14 -0400
| | Lines: 35
| | X-Priority: 3
| | X-MSMail-Priority: Normal
| | X-Newsreader: Microsoft Outlook Express 6.00.2900.3028
| | X-RFC2646: Format=Flowed Original
| | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
| | Message-ID: <Od#LntJyHHA.1204@TK2MSFTNGP03.phx.gbl>
| | Newsgroups: microsoft.public.windows.server.general
| | NNTP-Posting-Host: 64.86.141.133.wshs.cgi.ca 64.86.141.133
| | Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP03.phx.gbl
| | Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.general:17433
| | X-Tomcat-NG: microsoft.public.windows.server.general
| |
| | I am currently in the process of debugging 3 servers on one domain (2
DC
| and
| | a simple member server) all running on Windows 2003 SP2 R2.
| |
| | I will explain the problem more in details... it all started when i
| | installed SP2 on the member server. Everything was working fine on all
3
| | servers before SP2. However, when i install SP2 on one of the servers,
i
| am
| | getting slow behavior of EXPLORER.EXE getting so slow, that a window
| opened
| | becomes NOT RESPONDING... but, if i let it go for a couple of minutes,
it
| | will eventually become active again. I also notice that hitting Start
and
| | Program, the browsing of menu is slow... it's also slow when i Start,
Run
| | and type in something.
| |
| | All those servers are running mostly the same hardware, with 1 gig of
| | memory. If i uninstall SP2, it's all working very well again. When the
| | problem is present, i checked disk activity, cpu activity, memory
| activity
| | and everything is idle... memory usage is around 350-400mb so over
600mb
| is
| | still free. Server is not swapping. If i close EXPLORER.EXE the desktop
| | dissapear and when it comes back, it's fast again for a while, then it
| | starts again until it hangs again...
| |
| | I destroyed my domain, and built it from scratch with 2003 R2 SP2 CD
and
| | promoted my 2 DC's again and it's all up and running but still get the
| same
| | problem. It's virus free (got Symantec Enterprise v10 Server-Client
| | installed) and spyware free (no server has access to internet directly
| | anyway). All fix-packs and updates are installed and working. I have
| checked
| | the eventlog several times on all 3 servers, and nothing, there are no
| | errors and/or warnings about anything on them. Can anyone help me, i am
| | starting to regret to deploy SP2 on this domain cause it was all going
| | perfectly before this... now i am stuck with a slow EXPLORER.EXE on all
3
| | servers... which impacts any work done on those servers, either with
| | Terminal Server or on the console directly...
| |
| | Anyone can help out?
| |
| |
| |
|
|
 
You must log in or register to reply here.

Similar threads

B
Legacy Server 2008 R2 Question
Replies
0
Views
30
BobMurray
B
V
Windows Server 2012 R2 Servers not reflecting on Azure Arc
Replies
0
Views
38
Vikas Jagtap (BSL)
V
M
Windows Server 2003 R2 UNEXPECTED SHUTDOWN DUE TO BUGCHECK ERROR
Replies
0
Views
14
Muhammed Abdelhamid
M
A
Windows Server 2012 R2 Remote Desktop Unaccessible to Users
Replies
0
Views
38
Ahmad Dhamiri Muhammad Farhan
A
M
Windows Server 2012 R2 in place upgrade to 2016 / 2019
Replies
0
Views
64
Manuel Maliszewski
M
Back
Top Bottom