Constant BSOD while Starting Computer

N

Neon_Lenox

So, for the past two months, I have been getting constant BSOD with numerous STOP Codes such as CRITICAL_PROCESS_DIED, PAGE_FAULT_IN_NON_PAGED_AREA, MEMORY MANAGEMENT, INTERNAL POWER ERROR and KERNEL MODE HEAP CORRUPTION.


I have already clean booted my PC, Run SFC, DISM and CHKDSK. I also have run Windows Memory Diagnostic tool and MemTest86 for 4 hours.

I have the latest version of Windows and the latest drivers installed. Here is my WhoCrashed report-



On Mon 30-11-2020 08:24:22 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\113020-10500-01.dmp
This was probably caused by the following module: fltmgr.sys (0xFFFFF8021A9D86AD)
Bugcheck code: 0x50 (0xFFFF93027FFAFC00, 0x0, 0xFFFFF8021A9D86AD, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\WINDOWS\system32\drivers\fltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK.



On Mon 30-11-2020 08:24:22 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: fltmgr.sys (0xFFFFF8021A9D86AD)
Bugcheck code: 0x50 (0xFFFF93027FFAFC00, 0x0, 0xFFFFF8021A9D86AD, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\WINDOWS\system32\drivers\fltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK.



On Sun 29-11-2020 08:34:08 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\112920-9312-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5210)
Bugcheck code: 0x13A (0x9, 0xFFFF800B6E000000, 0xFFFF800B80FB8C60, 0x0)
Error: KERNEL_MODE_HEAP_CORRUPTION
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the kernel mode heap manager has detected corruption in a heap.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sat 28-11-2020 09:59:50 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\112820-10234-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5210)
Bugcheck code: 0x1A (0x41790, 0xFFFF958006591F00, 0x62, 0x63)
Error: MEMORY_MANAGEMENT
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred. A page table page has been corrupted.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 25-11-2020 19:49:03 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\112620-10750-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5210)
Bugcheck code: 0xA0 (0x107, 0xA, 0xFFFF9E8D307ADC70, 0x0)
Error: INTERNAL_POWER_ERROR
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the power policy manager experienced a fatal error.
This is likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 24-11-2020 20:25:26 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\112420-9890-01.dmp
This was probably caused by the following module: hardware.sys (hardware)
Bugcheck code: 0x1A (0x41792, 0xFFFFFE3FFCFAEC88, 0x2, 0x0)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred. A corrupted PTE has been detected.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hardware.sys .
Google query: hardware.sys MEMORY_MANAGEMENT


Note- These occurred after the Clean Install I did. I had the same problems before t he clean install. I am unable to solve the problem and it's frustrating. I want to solve this problem as soon as possible.


Continue reading...
 

Similar threads

Back
Top Bottom