Windows Protection Error

J

Julie

I installed a different motherboard today with one that came out of a
Windows 98 machine (no problems with that machine). I get this error when I
boot up on this machine.
I've re-installed Windows 98. When I re-installed, all I could see was that
it replaced my registry using scanreg (twice now). I've tried what Microsoft
says to do by disabling everything with msconfig. I still get the error.
I DO NOT want to reformat and install clean. Isn't there a vxd file I can
delete and when I reinstall, its created again.Any ideas?
 
A

AlmostBob

the drivers for the motherboard are different to the ones installed for your
oold motherboard
reisntall

--
-- -- -- -- --
Adaware http://www.lavasoft.de
spybot http://www.safer-networking.org
AVG free antivirus http://free.grisoft.com/
Etrust/Vet/CA.online Antivirus scan
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
Super Antispyware http://www.superantispyware.com/
Panda online AntiVirus scan http://www.activescan.com
Panda online AntiSpyware Scan
http://www.pandasoftware.com/virus_info/spyware/test/
Catalog of removal tools (1)
http://www.pandasoftware.com/download/utilities/
Catalog of removal tools (2)
http://www3.ca.com/securityadvisor/newsinfo/collateral.aspx?CID=40387
Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters
_
"Julie" <julieb@bellsouth.net> wrote in message
news:eruW6p%23RIHA.5404@TK2MSFTNGP03.phx.gbl...
> I installed a different motherboard today with one that came out of a
> Windows 98 machine (no problems with that machine). I get this error when
I
> boot up on this machine.
> I've re-installed Windows 98. When I re-installed, all I could see was
that
> it replaced my registry using scanreg (twice now). I've tried what
Microsoft
> says to do by disabling everything with msconfig. I still get the error.
> I DO NOT want to reformat and install clean. Isn't there a vxd file I can
> delete and when I reinstall, its created again.Any ideas?
>
>
 
P

philo

"Julie" <julieb@bellsouth.net> wrote in message
news:eruW6p%23RIHA.5404@TK2MSFTNGP03.phx.gbl...
> I installed a different motherboard today with one that came out of a
> Windows 98 machine (no problems with that machine). I get this error when
I
> boot up on this machine.
> I've re-installed Windows 98. When I re-installed, all I could see was
that
> it replaced my registry using scanreg (twice now). I've tried what
Microsoft
> says to do by disabling everything with msconfig. I still get the error.
> I DO NOT want to reformat and install clean. Isn't there a vxd file I can
> delete and when I reinstall, its created again.Any ideas?
>
>


If you can boot to safe mode...

delete the enum key in the registry...
the hardware will be re-detetected on bootup...
you may have to hunt down some drivers though
 
J

Julie

I can get into safe mode, but deleting enum does not work. Any other ideas?

"philo" <philo@privacy.net> wrote in message
news:e%23QKEgASIHA.280@TK2MSFTNGP03.phx.gbl...
>
> "Julie" <julieb@bellsouth.net> wrote in message
> news:eruW6p%23RIHA.5404@TK2MSFTNGP03.phx.gbl...
> > I installed a different motherboard today with one that came out of a
> > Windows 98 machine (no problems with that machine). I get this error
when
> I
> > boot up on this machine.
> > I've re-installed Windows 98. When I re-installed, all I could see was
> that
> > it replaced my registry using scanreg (twice now). I've tried what
> Microsoft
> > says to do by disabling everything with msconfig. I still get the error.
> > I DO NOT want to reformat and install clean. Isn't there a vxd file I
can
> > delete and when I reinstall, its created again.Any ideas?
> >
> >
>
>
> If you can boot to safe mode...
>
> delete the enum key in the registry...
> the hardware will be re-detetected on bootup...
> you may have to hunt down some drivers though
>
>
 
P

philo

"Julie" <julieb@bellsouth.net> wrote in message
news:%23UUxmDDSIHA.1208@TK2MSFTNGP05.phx.gbl...
> I can get into safe mode, but deleting enum does not work. Any other
ideas?
>
> "philo" <philo@privacy.net> wrote in message
> news:e%23QKEgASIHA.280@TK2MSFTNGP03.phx.gbl...
> >
> > "Julie" <julieb@bellsouth.net> wrote in message
> > news:eruW6p%23RIHA.5404@TK2MSFTNGP03.phx.gbl...
> > > I installed a different motherboard today with one that came out of a
> > > Windows 98 machine (no problems with that machine). I get this error
> when
> > I
> > > boot up on this machine.
> > > I've re-installed Windows 98. When I re-installed, all I could see was
> > that
> > > it replaced my registry using scanreg (twice now). I've tried what
> > Microsoft
> > > says to do by disabling everything with msconfig. I still get the
error.
> > > I DO NOT want to reformat and install clean. Isn't there a vxd file I
> can
> > > delete and when I reinstall, its created again.Any ideas?
> > >
> > >
> >
> >
> > If you can boot to safe mode...
> >
> > delete the enum key in the registry...
> > the hardware will be re-detetected on bootup...
> > you may have to hunt down some drivers though
> >
> >
>
>

You may have to perform a parallel installation...

You can reinstall windows in a 2nd folder and that will essentially give you
a clean install
but you will NOT have to format the drive.

If you do that, all your data willbe there...but all your apps will have to
be reinstalled
and all your custom setting will be lost.
 
J

Julie

I'm not worried about my data - its all backed up. What I do want to keep is
exactly what you said i would lose - my apps and custom settings. Isn't
there something else?


"philo" <philo@privacy.net> wrote in message
news:e1tO$XISIHA.2376@TK2MSFTNGP02.phx.gbl...
>
> "Julie" <julieb@bellsouth.net> wrote in message
> news:%23UUxmDDSIHA.1208@TK2MSFTNGP05.phx.gbl...
> > I can get into safe mode, but deleting enum does not work. Any other
> ideas?
> >
> > "philo" <philo@privacy.net> wrote in message
> > news:e%23QKEgASIHA.280@TK2MSFTNGP03.phx.gbl...
> > >
> > > "Julie" <julieb@bellsouth.net> wrote in message
> > > news:eruW6p%23RIHA.5404@TK2MSFTNGP03.phx.gbl...
> > > > I installed a different motherboard today with one that came out of
a
> > > > Windows 98 machine (no problems with that machine). I get this error
> > when
> > > I
> > > > boot up on this machine.
> > > > I've re-installed Windows 98. When I re-installed, all I could see
was
> > > that
> > > > it replaced my registry using scanreg (twice now). I've tried what
> > > Microsoft
> > > > says to do by disabling everything with msconfig. I still get the
> error.
> > > > I DO NOT want to reformat and install clean. Isn't there a vxd file
I
> > can
> > > > delete and when I reinstall, its created again.Any ideas?
> > > >
> > > >
> > >
> > >
> > > If you can boot to safe mode...
> > >
> > > delete the enum key in the registry...
> > > the hardware will be re-detetected on bootup...
> > > you may have to hunt down some drivers though
> > >
> > >
> >
> >
>
> You may have to perform a parallel installation...
>
> You can reinstall windows in a 2nd folder and that will essentially give
you
> a clean install
> but you will NOT have to format the drive.
>
> If you do that, all your data willbe there...but all your apps will have
to
> be reinstalled
> and all your custom setting will be lost.
>
>
 
P

philo


> > >
> >
> > You may have to perform a parallel installation...
> >
> > You can reinstall windows in a 2nd folder and that will essentially give
> you
> > a clean install
> > but you will NOT have to format the drive.
> >
> > If you do that, all your data willbe there...but all your apps will have
> to
> > be reinstalled
> > and all your custom setting will be lost.
> >
> >
>
>

All I can think of would be to get a motherboard similar to your original
one...
the same chipset etc.
 
P

PCR

Julie wrote:
| I installed a different motherboard today with one that came out of a
| Windows 98 machine (no problems with that machine). I get this error
| when I boot up on this machine.
| I've re-installed Windows 98. When I re-installed, all I could see
| was that it replaced my registry using scanreg (twice now). I've
| tried what Microsoft says to do by disabling everything with
| msconfig. I still get the error.
| I DO NOT want to reformat and install clean. Isn't there a vxd file I
| can delete and when I reinstall, its created again.Any ideas?

VMM32.vxd is the file that likely contains the low-level drivers you
need to replace. It is a monolithic file containing many drivers. It was
my understanding that the file would regenerate during an over-install
of Windows, which I think you said you have done. What is the date on
yours? Here is mine...

C:\>dir c:\vmm32.vxd /s
Directory of C:\WINDOWS\SYSTEM
VMM32 VXD 941,094 07-22-99 12:21a VMM32.VXD

If yours is still the old one, perhaps you must delete it first, per...
http://support.microsoft.com/kb/141898/en-us
Windows 95/98 Boots Directly to "Shut Down" Screen

.......Quote the article............
To Re-Create the Vmm32.vxd File

1. Restart your computer.

For Windows 95, when you see the "Starting Windows 95" message, press
the F8 key, and then choose Command Prompt Only from the Startup menu.
For Windows 98, press and hold down the CTRL key after your computer
completes the Power On Self Test (POST), and then choose Command Prompt
Only from the Startup menu.

2. Type the following line to change to the Windows\System folder:

cd \windows\system

3. Type the following line:

ren vmm32.vxd vmm32.old

4. Reinstall Windows 95/98.

NOTE: If you installed Windows 95 from a CD-ROM, you may need to enable
the Mscdex.exe line in the Autoexec.bat file or reinstall the real-mode
CD-ROM drivers included with the CD-ROM drive before you can reinstall
Windows 95. After you enable the real-mode CD-ROM drivers, repeat step 1
to restart the computer.
.......EOQ..............................

Notes...

(a) Ensure you have that Mscdex.exe in Autoexec.bat (or at least in
DOSStart.bat) whether or not you are Win95.

(b) To undo instruction 3 (if necessary), reverse the names after "ren".

(c) Some say an over-install of Windows (into the same folder) can lead
to DLL-Hell. If you actually haven't done it yet, you may instead
install Windows into a new folder, as philo said. Then, just copy
VMM32.vxd from that new folder into the current one. Also, you must
change the folder names in MSDOS.sys back to what they are now. Here are
what mine look like...

[Paths]
WinDir=c:\windows
WinBootDir=c:\windows
HostWinBootDrv=c

I think that's all, (but I'm not quite sure). I wonder, what is in your
VMM32 folder? Here is mine...

C:\>dir C:\WINDOWS\SYSTEM\VMM32 /a
Directory of C:\WINDOWS\SYSTEM\VMM32

IFSMGR VXD 186,438 09-19-00 12:57p IFSMGR.VXD
IOS VXD 69,570 04-23-99 10:22p IOS.VXD
MRCI2 VXD 53,403 04-23-99 10:22p MRCI2.VXD
QEMMFIX VXD 9,792 04-23-99 10:22p QEMMFIX.VXD
ESSDRV <DIR> 08-07-01 10:36p ESSDRV

Whatever is in that folder will override a .vxd of the same name inside
the monolithic VMM32.vxd file.


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net
 
You must log in or register to reply here.

Similar threads

M
Link to Windows issue with phone audio
Replies
0
Views
55
Mjrtoo
M
V
Windows protection history keeps crashing
Replies
0
Views
20
Viera022
V
J
SD card reader stuck on write protection
Replies
0
Views
16
JohnnyTelcher
J
M
Solution for this error 0x800703e6 that doesn't involve me resetting my machine.
Replies
0
Views
42
Max K4
M
F
rav endpoint protection
Replies
0
Views
53
Flame Pup
F
Back
Top Bottom