Windows freezes permanently after a few seconds

B

Badonfulus

Hello,


Upon setting up my PC, it was getting BSOD error WHEA_UNCORRECTABLE_ERROR, after around 30 seconds of running

the computer works fine in safe mode, and I updated the drivers, so now instead of crashing the software freezes in an unusual way:

I can interact with the application that is currently open, but as soon as I click off / run a seperate process it freezes as well. i can move the mouse but can't click on anything


Each third time that my computer restarts it goes to the recovery screen, and if I choose startup repair it gives an error message, saying that Automatic repair couldn't repair your PC


Also, in safe mode device manager shows outdated drivers, but in normal mode the drivers are present and up to date.


sfc /scannow does not find any integrity violations

chkdsk found no problems either


I have tried performing a clean boot, but the same issue persists.




Startup Repair diagnosis and repair log

---------------------------

Last successful boot time: ‎27/‎12/‎2020 01:18:32 (GMT)

Number of repair attempts: 1



Session details

---------------------------

System Disk = \Device\Harddisk0

Windows directory = C:\Windows

AutoChk Run = 0

Number of root causes = 1



Test Performed:

---------------------------

Name: Check for updates

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: System disk test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Disk failure diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 140 ms



Test Performed:

---------------------------

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Target OS test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Volume content check

Result: Completed successfully. Error code = 0x0

Time taken = 63 ms



Test Performed:

---------------------------

Name: Boot manager diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: System boot log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Event log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 15 ms



Test Performed:

---------------------------

Name: Internal state check

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Test Performed:

---------------------------

Name: Check for installed LCU

Result: Completed successfully. Error code = 0x0

Time taken = 2172 ms



Test Performed:

---------------------------

Name: Check for installed driver updates

Result: Completed successfully. Error code = 0x0

Time taken = 844 ms



Test Performed:

---------------------------

Name: Check for pending package install

Result: Completed successfully. Error code = 0x0

Time taken = 1625 ms



Test Performed:

---------------------------

Name: Boot status test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms



Root cause found:

---------------------------

Boot status indicates that the OS booted successfully.



---------------------------

---------------------------

Continue reading...
 
Back
Top Bottom