강
강민수 (Minsoo)
Hello, I've moved my recovery partition away from C: so I can expend it more.
I have successfully moved my WinRE.wim to the new recovery partition too, so the REAGENTC.exe can actually set the path to the new partition.
But somehow, setting the REAGENTC.exe /enable doesn't have any effect. Below are some status info.
1.
with diskpart and reagentc, here is what happens
(vvv THINGS I TRIED vvv)
1. I am checking my diskpartition.
- The recovery partition has type recovery and label New Drive. It doesn't have any letter assigned to it
2. Then I check current state of REAGENTC.exe
- It is currently disabled
3. I set the recovery partition\recovery\WindowsRE (700MB) to the path of the WinRE.wim.
- It is successful
4. Then I enable the REAGENTC.exe a couple of times, but even after the /enable, they are still disabled.
In fact, when I try /disable, they appear already disabled.\
5. I have rebooted the device just in case...you know, conventional master key to issues.
Still doesn't enable.
I would appreciate any idea how to solve it...I'm quite tired of the problem now.
---------------------------------------------------------------------------------------------------------------------------------
PS C:\WINDOWS\system32> diskpart
Microsoft DiskPart version 10.0.19041.610
Copyright (C) Microsoft Corporation.
On computer: MINSOO
DISKPART> select disk 0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 479 MB 64 KB
Partition 2 Reserved 16 MB 480 MB
Partition 3 Primary 99 GB 496 MB
Partition 4 Primary 137 GB 100 GB
Partition 5 Recovery 700 MB 237 GB
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C NTFS Partition 99 GB Healthy Boot
Volume 1 D Personal Fi NTFS Partition 137 GB Healthy
Volume 2 TINYCORE64 FAT32 Partition 479 MB Healthy System
Volume 3 NEW VOLUME FAT32 Partition 700 MB Healthy Hidden
DISKPART> exit
Leaving DiskPart...
------------------------------------------------------------------------------------------------------------------------
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /setreimage /path \\?\globalroot\device\harddisk0\partition5\recovery\WindowsRE /target c:\windows
Directory set to: \\?\GLOBALROOT\device\harddisk0\partition5\recovery\WindowsRE
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /setreimage /path \\?\globalroot\device\harddisk0\partition5\recovery\WindowsRE /target c:\windows /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /disable
REAGENTC.EXE: Windows RE is already disabled.
Continue reading...
I have successfully moved my WinRE.wim to the new recovery partition too, so the REAGENTC.exe can actually set the path to the new partition.
But somehow, setting the REAGENTC.exe /enable doesn't have any effect. Below are some status info.
1.
with diskpart and reagentc, here is what happens
(vvv THINGS I TRIED vvv)
1. I am checking my diskpartition.
- The recovery partition has type recovery and label New Drive. It doesn't have any letter assigned to it
2. Then I check current state of REAGENTC.exe
- It is currently disabled
3. I set the recovery partition\recovery\WindowsRE (700MB) to the path of the WinRE.wim.
- It is successful
4. Then I enable the REAGENTC.exe a couple of times, but even after the /enable, they are still disabled.
In fact, when I try /disable, they appear already disabled.\
5. I have rebooted the device just in case...you know, conventional master key to issues.
Still doesn't enable.
I would appreciate any idea how to solve it...I'm quite tired of the problem now.
---------------------------------------------------------------------------------------------------------------------------------
PS C:\WINDOWS\system32> diskpart
Microsoft DiskPart version 10.0.19041.610
Copyright (C) Microsoft Corporation.
On computer: MINSOO
DISKPART> select disk 0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 479 MB 64 KB
Partition 2 Reserved 16 MB 480 MB
Partition 3 Primary 99 GB 496 MB
Partition 4 Primary 137 GB 100 GB
Partition 5 Recovery 700 MB 237 GB
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C NTFS Partition 99 GB Healthy Boot
Volume 1 D Personal Fi NTFS Partition 137 GB Healthy
Volume 2 TINYCORE64 FAT32 Partition 479 MB Healthy System
Volume 3 NEW VOLUME FAT32 Partition 700 MB Healthy Hidden
DISKPART> exit
Leaving DiskPart...
------------------------------------------------------------------------------------------------------------------------
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /setreimage /path \\?\globalroot\device\harddisk0\partition5\recovery\WindowsRE /target c:\windows
Directory set to: \\?\GLOBALROOT\device\harddisk0\partition5\recovery\WindowsRE
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /setreimage /path \\?\globalroot\device\harddisk0\partition5\recovery\WindowsRE /target c:\windows /enable
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /info
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 073301ba-88cf-11eb-b5d4-5076af3d663d
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
PS C:\WINDOWS\system32> reagentc /disable
REAGENTC.EXE: Windows RE is already disabled.
Continue reading...