H
hpcomps
(translated from Russian into English via google translator)
Original in Russian here
Hello. Hp 15-ay501ur laptop. the lock screen and welcome screen are off. In the power settings, the "quick start" checkbox is enabled and the actions when i press the power button and close the lid are selected "sleep"
But the timeout the screen turns on from the moment the button is pressed and from the moment the lid is opened is different
If I do not close the lid and put the laptop to sleep by pressing the power button, then pressing the power button again while waking up, the screen turns on after a 1-2 seconds
If I send the laptop to sleep by closing the lid, and then opening the lid "wake up", the screen turns on after 4-5 seconds
BUT!!! If I put the laptop to sleep with the power button, then close the lid, and wake up by opening the lid, then the screen turns on as quickly as in the first case, in just a 1-2 seconds
How to make sure that when i close the lid and then open the screen, it turns on as quickly as when i turn it off and on with the button?
After all, as it seems to me, the fact that turning off with a button followed by closing and turning on by opening also occurs in 1-2 seconds, than if i close and open the lid, suggests that this is not a hardware component, but a software, IMHO
It seems that the mechanism for entering sleep mode by simply closing the lid does not use or does not take into account the "fast start"
and the transition to sleep mode when the button is pressed uses and takes into account the "quick start" and that it is possible somewhere in the settings or in the registry to make changes in which the system will use the same mechanism, or you can "trick" the system so that when the lid is closed it "thinks "that the power button is pressed
Installed Windows 21H1 19043, on Windows 20H2 19041 the behavior is similar
Continue reading...
Original in Russian here
Hello. Hp 15-ay501ur laptop. the lock screen and welcome screen are off. In the power settings, the "quick start" checkbox is enabled and the actions when i press the power button and close the lid are selected "sleep"
But the timeout the screen turns on from the moment the button is pressed and from the moment the lid is opened is different
If I do not close the lid and put the laptop to sleep by pressing the power button, then pressing the power button again while waking up, the screen turns on after a 1-2 seconds
If I send the laptop to sleep by closing the lid, and then opening the lid "wake up", the screen turns on after 4-5 seconds
BUT!!! If I put the laptop to sleep with the power button, then close the lid, and wake up by opening the lid, then the screen turns on as quickly as in the first case, in just a 1-2 seconds
How to make sure that when i close the lid and then open the screen, it turns on as quickly as when i turn it off and on with the button?
After all, as it seems to me, the fact that turning off with a button followed by closing and turning on by opening also occurs in 1-2 seconds, than if i close and open the lid, suggests that this is not a hardware component, but a software, IMHO
It seems that the mechanism for entering sleep mode by simply closing the lid does not use or does not take into account the "fast start"
and the transition to sleep mode when the button is pressed uses and takes into account the "quick start" and that it is possible somewhere in the settings or in the registry to make changes in which the system will use the same mechanism, or you can "trick" the system so that when the lid is closed it "thinks "that the power button is pressed
Installed Windows 21H1 19043, on Windows 20H2 19041 the behavior is similar
Continue reading...