Linksys Wireless-N Broadband

  • Thread starter Patrick Whittle
  • Start date
P

Patrick Whittle

Originally I bought a Linksys Wireless-G router and then returned it to
exchange for Wireless-N. I think that this may be the reason that a
computer in the basement cant connect to a second computer upstairs. This
is the simplest thing imaginable to me, but there may be a conflict
somewhere I have missed. Any ideas/experiences would be greatly
appreciated.
 
M

Mark L. Ferguson

My guess would be that the SSID (workgroup name) set in the router setup
(usually available via http://192.168.0.1 ) is not the same as the old
router.

--
Mark L. Ferguson
e-mail subject line must include "QZ" or it's deleted
..
"Patrick Whittle" <patrick_whittle@hotmail.com> wrote in message
news:%23WOWxKWUIHA.5980@TK2MSFTNGP04.phx.gbl...
> Originally I bought a Linksys Wireless-G router and then returned it to
> exchange for Wireless-N. I think that this may be the reason that a
> computer in the basement cant connect to a second computer upstairs. This
> is the simplest thing imaginable to me, but there may be a conflict
> somewhere I have missed. Any ideas/experiences would be greatly
> appreciated.
>
>
>
 
N

nass

"Patrick Whittle" wrote:

> Originally I bought a Linksys Wireless-G router and then returned it to
> exchange for Wireless-N. I think that this may be the reason that a
> computer in the basement cant connect to a second computer upstairs. This
> is the simplest thing imaginable to me, but there may be a conflict
> somewhere I have missed. Any ideas/experiences would be greatly
> appreciated.


You will need to run the Setup wizard for the Wireless, as the Old Router As
" mark" Kindly pointed, took the setting with it for good, including the SSID
and the Encryption been used to secure this Wireless Network?.

steps to set up your home wireless network
http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

Steps to Enable UPnP for Linksys BEFSR81
http://www.microsoft.com/windowsxp/using/windowsmessenger/expert/linksysBEFSR81.mspx

Read this link:
http://www.microsoft.com/athome/moredone/wirelesssetup.mspx
HTH.
Regards,
nass
--------
http://www.nasstec.co.uk
 
P

Patrick Whittle

The workgroup name I gave is the same. BUT, the Network Key (WEP/WPA Key):
1bb9d8b0ec5d40b692f9d552dd is different. Does this matter? And if so, how
do I change it?

"Mark L. Ferguson" <marfer_mvp@Yahoo.com> wrote in message
news:%23L6QL6WUIHA.5160@TK2MSFTNGP05.phx.gbl...
> My guess would be that the SSID (workgroup name) set in the router setup
> (usually available via http://192.168.0.1 ) is not the same as the old
> router.
>
> --
> Mark L. Ferguson
> e-mail subject line must include "QZ" or it's deleted
> .
> "Patrick Whittle" <patrick_whittle@hotmail.com> wrote in message
> news:%23WOWxKWUIHA.5980@TK2MSFTNGP04.phx.gbl...
>> Originally I bought a Linksys Wireless-G router and then returned it to
>> exchange for Wireless-N. I think that this may be the reason that a
>> computer in the basement cant connect to a second computer upstairs.
>> This
>> is the simplest thing imaginable to me, but there may be a conflict
>> somewhere I have missed. Any ideas/experiences would be greatly
>> appreciated.
>>
>>
>>
 
M

Mark L. Ferguson

Linksys Easy Answers wireless:
http://linksys.custhelp.com/cgi-bin...ZHNvcnQ9JnBfcm93X2NudD05MzUmcF9wYWdlPTE*&p_li

--
Mark L. Ferguson
e-mail subject line must include "QZ" or it's deleted
..
"Patrick Whittle" <patrick_whittle@hotmail.com> wrote in message
news:%23LtEQXXUIHA.2000@TK2MSFTNGP05.phx.gbl...
> The workgroup name I gave is the same. BUT, the Network Key (WEP/WPA
> Key):
> 1bb9d8b0ec5d40b692f9d552dd is different. Does this matter? And if so,
> how
> do I change it?
>
> "Mark L. Ferguson" <marfer_mvp@Yahoo.com> wrote in message
> news:%23L6QL6WUIHA.5160@TK2MSFTNGP05.phx.gbl...
>> My guess would be that the SSID (workgroup name) set in the router setup
>> (usually available via http://192.168.0.1 ) is not the same as the old
>> router.
>>
>> --
>> Mark L. Ferguson
>> e-mail subject line must include "QZ" or it's deleted
>> .
>> "Patrick Whittle" <patrick_whittle@hotmail.com> wrote in message
>> news:%23WOWxKWUIHA.5980@TK2MSFTNGP04.phx.gbl...
>>> Originally I bought a Linksys Wireless-G router and then returned it to
>>> exchange for Wireless-N. I think that this may be the reason that a
>>> computer in the basement cant connect to a second computer upstairs.
>>> This
>>> is the simplest thing imaginable to me, but there may be a conflict
>>> somewhere I have missed. Any ideas/experiences would be greatly
>>> appreciated.
>>>
>>>
>>>

>
 
M

MowGreen [MVP]

PLEASE, do *NOT* post the WEP Key. Since you have, please change it ASAP.

MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============


Patrick Whittle wrote:

> The workgroup name I gave is the same. BUT, the Network Key (WEP/WPA Key):
> 1bb9d8b0ec5d40b692f9d552dd is different. Does this matter? And if so, how
> do I change it?
>
> "Mark L. Ferguson" <marfer_mvp@Yahoo.com> wrote in message
> news:%23L6QL6WUIHA.5160@TK2MSFTNGP05.phx.gbl...
>
>>My guess would be that the SSID (workgroup name) set in the router setup
>>(usually available via http://192.168.0.1 ) is not the same as the old
>>router.
>>
>>--
>>Mark L. Ferguson
>>e-mail subject line must include "QZ" or it's deleted
>>.
>>"Patrick Whittle" <patrick_whittle@hotmail.com> wrote in message
>>news:%23WOWxKWUIHA.5980@TK2MSFTNGP04.phx.gbl...
>>
>>>Originally I bought a Linksys Wireless-G router and then returned it to
>>>exchange for Wireless-N. I think that this may be the reason that a
>>>computer in the basement cant connect to a second computer upstairs.
>>>This
>>>is the simplest thing imaginable to me, but there may be a conflict
>>>somewhere I have missed. Any ideas/experiences would be greatly
>>>appreciated.
>>>
>>>
>>>

>
>
 

Similar threads

Back
Top Bottom