OS HDD to ext HDD.

[rod]

I have a Win98se box,
can I remove the HDD,
and hook it up as an external HDD on my XP?
I need to employ USB2 to move 300,000
images over to my XP.
Any warnings or "heads up" ?
Thanks very much.

 

[lb]

rod wrote:
> I have a Win98se box,
> can I remove the HDD,
> and hook it up as an external HDD on my XP?
> I need to employ USB2 to move 300,000
> images over to my XP.
> Any warnings or "heads up" ?
> Thanks very much.

No such connection exists AFAIK. You could install the HDD as a slave
possibley long enough to do the transfers. Your new box may not
have connections for an IDE drive though. You might also be able to
network the 2 PC's. You could also get hold of an external CD burner
if you do not have one in your 98 box and put them on a CD.

 

[AlmostBob]

yes if get a usb2/ide enclosure to put the drive in it can be used as an
external usb drive something like
http://www.xpcgear.com/enclosures.html
might be easier to get a crossover rj11 cable and direct link them
or get a router and use both
have a win98 box with 4x160GB drives in it as storage
--
-- -- -- -- --
Adaware http://www.lavasoft.de
spybot http://www.safer-networking.org
AVG free antivirus http://free.grisoft.com/
Etrust/Vet/CA.online Antivirus scan
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
Super Antispyware http://www.superantispyware.com/
Panda online AntiVirus scan http://www.activescan.com
Panda online AntiSpyware Scan
http://www.pandasoftware.com/virus_info/spyware/test/
Catalog of removal tools (1)
http://www.pandasoftware.com/download/utilities/
Catalog of removal tools (2)
http://www3.ca.com/securityadvisor/newsinfo/collateral.aspx?CID=40387
Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters
_
"rod" <pookiethai@NOSPAMiprimus.com.au> wrote in message
news:eFywOWCXIHA.1208@TK2MSFTNGP03.phx.gbl...
> I have a Win98se box,
> can I remove the HDD,
> and hook it up as an external HDD on my XP?
> I need to employ USB2 to move 300,000
> images over to my XP.
> Any warnings or "heads up" ?
> Thanks very much.
>
>
>
>

 

[rod]

Cheers Almost Bob, (thanks to lb for responding too)
I have 4 or 5 other enclosures (I should have mentioned this in my OP)
so I know the idea works fine
I was just worried something may be compromised
with an OS on the external drive.
I like the idea of the rj11 cable, and will give it a try
saves opening up the 98se box.


"AlmostBob" <anonymous1@discussions.microsoft.com> wrote in message
news:%23bV3bKIXIHA.1132@TK2MSFTNGP06.phx.gbl...
> yes if get a usb2/ide enclosure to put the drive in it can be used as an
> external usb drive something like
> http://www.xpcgear.com/enclosures.html
> might be easier to get a crossover rj11 cable and direct link them
> or get a router and use both
> have a win98 box with 4x160GB drives in it as storage
> --
> -- -- -- -- --
> Adaware http://www.lavasoft.de
> spybot http://www.safer-networking.org
> AVG free antivirus http://free.grisoft.com/
> Etrust/Vet/CA.online Antivirus scan
> http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
> Super Antispyware http://www.superantispyware.com/
> Panda online AntiVirus scan http://www.activescan.com
> Panda online AntiSpyware Scan
> http://www.pandasoftware.com/virus_info/spyware/test/
> Catalog of removal tools (1)
> http://www.pandasoftware.com/download/utilities/
> Catalog of removal tools (2)
> http://www3.ca.com/securityadvisor/newsinfo/collateral.aspx?CID=40387
> Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
> Blocking Unwanted Parasites with a Hosts file
> http://mvps.org/winhelp2002/hosts.htm
> links provided as a courtesy, read all instructions on the pages before
> use
> Grateful thanks to the authors/webmasters
> _
> "rod" <pookiethai@NOSPAMiprimus.com.au> wrote in message
> news:eFywOWCXIHA.1208@TK2MSFTNGP03.phx.gbl...
>> I have a Win98se box,
>> can I remove the HDD,
>> and hook it up as an external HDD on my XP?
>> I need to employ USB2 to move 300,000
>> images over to my XP.
>> Any warnings or "heads up" ?
>> Thanks very much.
>>
>>
>>
>>
>
>

 

[rod]

> might be easier to get a crossover rj11 cable and direct link them

Can you explain how I do this please?

 

[Ingeborg]

rod wrote:

>> might be easier to get a crossover rj11 cable and direct link them
>
> Can you explain how I do this please?
>

Plug the RJ11 cable in the NIC's of the computer (They both have a NIC?).
Give both NIC's a static IP address in the same range (for instance PC1
10.0.0.1/255.255.255.0 and PC2 10.0.0.2/255.255.255.0). The computers
should now be able to see each other. Share the disk on the W9x system.

 

[rod]

Hiya Ingeborg,
Can you please expand on how I may "Give both NIC's a static IP address "
in detail.
They both have NIC's

Thanks for the assistance thus far.
Rod.




"Ingeborg" <a@b.invalid> wrote in message
news:Xns9A2D63D82F0FFabinvalid@194.109.133.133...
> rod wrote:
>
>>> might be easier to get a crossover rj11 cable and direct link them
>>
>> Can you explain how I do this please?
>>
>
> Plug the RJ11 cable in the NIC's of the computer (They both have a NIC?).
> Give both NIC's a static IP address in the same range (for instance PC1
> 10.0.0.1/255.255.255.0 and PC2 10.0.0.2/255.255.255.0). The computers
> should now be able to see each other. Share the disk on the W9x system.

 

[Ingeborg]

rod wrote:

>
> Hiya Ingeborg,
> Can you please expand on how I may "Give both NIC's a static IP
> address " in detail.
> They both have NIC's
>

In W98: Goto control panel->Network. Select the TCP/IP protocol connected
to the NIC. Choose Properties. Goto tab ip-address and fill the ip-address
(10.0.0.1) and subnetmask (255.255.255.0). W98 will have to reboot.

In XP: Goto control panel->Network connections. Rightclick the 'Local Area
Conntection' and choose Properties. Select TCP/IP and choose Properties.
Fill the ip address (10.0.0.2) and subnetmask. Default gateway and DNS
server can be left empty, in this case.

 

[rod]

Thank you very much Ingeborg, for sharing
your time and knowledge
Rod.


"Ingeborg" <a@b.invalid> wrote in message
news:Xns9A2D8699442BCabinvalid@194.109.133.133...
> rod wrote:
>
>>
>> Hiya Ingeborg,
>> Can you please expand on how I may "Give both NIC's a static IP
>> address " in detail.
>> They both have NIC's
>>
>
> In W98: Goto control panel->Network. Select the TCP/IP protocol connected
> to the NIC. Choose Properties. Goto tab ip-address and fill the ip-address
> (10.0.0.1) and subnetmask (255.255.255.0). W98 will have to reboot.
>
> In XP: Goto control panel->Network connections. Rightclick the 'Local Area
> Conntection' and choose Properties. Select TCP/IP and choose Properties.
> Fill the ip address (10.0.0.2) and subnetmask. Default gateway and DNS
> server can be left empty, in this case.
>

 

[Teflon]

On Jan 21, 4:02 am, "rod" <pookiet...@NOSPAMiprimus.com.au> wrote:
> I have a Win98se box,
> can I remove the HDD,
> and hook it up as an external HDD on my XP?
> I need to employ USB2 to move 300,000
> images over to my XP.
> Any warnings  or "heads up" ?
> Thanks very much.

Just did this file transfer bit. Since both systems support USB 2.0,
I used an 8GB flash drive to do the transfer. Got a generic USB Mass
Storage driver for SE and it had no problems. XP was an automatic.

Had previously tried ad hoc networking, cables, etc., but could never
get any to work consistently. Successfully used Internet-based file
transfer site, 'You Send It', but the USB flash drive was easier and
faster.

Prior to installing SE, I also considered dismantling my laptop to do
the USB enclosure thing on XP, but SE's USB 2.0 support and the flash
drive saved the day.

Flash drives are relatively cheap and getting cheaper. 8GB SanDisk at
Office Max for $59. 4GB for $30. Office Depot will match that price.

 

[rod]

"Teflon" <
Just did this file transfer bit. Since both systems support USB 2.0,
I used an 8GB flash drive to do the transfer. Got a generic USB Mass
Storage driver for SE and it had no problems. XP was an automatic.

Not bad advice for small system,
I found removing the drive and hooking as external HDD very fast

I rushed out and bought a networking USB cable (easy transfer cable)
but shot myself in the foot
$80 wasted as it does not works with 98SE

I'll post back on the reults of the rj11 cable.

 

[Bill Watt]

On Wed, 23 Jan 2008 07:39:15 +0900, "rod"
<pookiethai@NOSPAMiprimus.com.au> wrote:

>
>"Teflon" <
>Just did this file transfer bit. Since both systems support USB 2.0,
>I used an 8GB flash drive to do the transfer. Got a generic USB Mass
>Storage driver for SE and it had no problems. XP was an automatic.
>
>Not bad advice for small system,
>I found removing the drive and hooking as external HDD very fast
>
>I rushed out and bought a networking USB cable (easy transfer cable)
>but shot myself in the foot
>$80 wasted as it does not works with 98SE
>
>I'll post back on the reults of the rj11 cable.

Rod,

I use a USB 80GB external HDD. I formatted it FAT32 with two 40 GB
partitions. It works with my 1 yr old XP Pro Notebook and my 6 yr
old PIII PC running 98SE just by plugging it in. I can backup one
machine to C: and the other to D:. I can also just put some files
and programs from either and copy them over to the other. They have
smaller drives too, I forget the price of the 80GB but I was
surprised how cheap it was at Staples. I can also take it anywhere
and use it on other machines. It works with USB 1.1 and USB 2.0.
Check the specs on the unit before you consider buying it. Mine is a
Firelite Smartdisk.

Worth looking into.

Regards,

Bill Watt
Win98 Computer Help & Other Information http://home.ptd.net/~bwatt/



All I do is plug them in and both machines see it as another drive.

 

[rod]

"Bill Watt"

> Rod,
> I use a USB 80GB external HDD. I formatted it FAT32 with two 40 GB
> partitions. It works with my 1 yr old XP Pro Notebook and my 6 yr
> old PIII PC running 98SE just by plugging it in. I can backup one
> machine to C: and the other to D:. I can also just put some files
> and programs from either and copy them over to the other. They have
> smaller drives too, I forget the price of the 80GB but I was
> surprised how cheap it was at Staples. I can also take it anywhere
> and use it on other machines. It works with USB 1.1 and USB 2.0.
> Check the specs on the unit before you consider buying it. Mine is a
> Firelite Smartdisk.
> Worth looking into.
> Regards,
> Bill Watt
> Win98 Computer Help & Other Information http://home.ptd.net/~bwatt/
> All I do is plug them in and both machines see it as another drive.

Hiya Bill,
Actually thats exactly what I do, no different, and find it super.
My problem I was faced with was a large amount of files
on my Win98se (both on the C drive and second internal drive the D drive)
Following your (and mine) route, win 98se only transfers at USB1.1
So say 80Gb would have been painfully slow. (probably 6 hours)

I have about 6 or so external drives and I hot swap them all the time.

I didn't ever think I'd say this, but once 98 is emptied
I'll archive the machine, if only for the fact working
with USB's are such a pain ( re boot etc)

 

[AlmostBob]

A cheapo router might be the easiest thing, then you just use the win98 box
as a storage location, you dont have to move the images

--
-- -- -- -- --
Adaware http://www.lavasoft.de
spybot http://www.safer-networking.org
AVG free antivirus http://free.grisoft.com/
Etrust/Vet/CA.online Antivirus scan
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
Super Antispyware http://www.superantispyware.com/
Panda online AntiVirus scan http://www.activescan.com
Panda online AntiSpyware Scan
http://www.pandasoftware.com/virus_info/spyware/test/
Catalog of removal tools (1)
http://www.pandasoftware.com/download/utilities/
Catalog of removal tools (2)
http://www3.ca.com/securityadvisor/newsinfo/collateral.aspx?CID=40387
Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters
_
"rod" <pookiethai@NOSPAMiprimus.com.au> wrote in message
news:ebwsA0aXIHA.1376@TK2MSFTNGP02.phx.gbl...
>
> "Bill Watt"
>
> > Rod,
> > I use a USB 80GB external HDD. I formatted it FAT32 with two 40 GB
> > partitions. It works with my 1 yr old XP Pro Notebook and my 6 yr
> > old PIII PC running 98SE just by plugging it in. I can backup one
> > machine to C: and the other to D:. I can also just put some files
> > and programs from either and copy them over to the other. They have
> > smaller drives too, I forget the price of the 80GB but I was
> > surprised how cheap it was at Staples. I can also take it anywhere
> > and use it on other machines. It works with USB 1.1 and USB 2.0.
> > Check the specs on the unit before you consider buying it. Mine is a
> > Firelite Smartdisk.
> > Worth looking into.
> > Regards,
> > Bill Watt
> > Win98 Computer Help & Other Information http://home.ptd.net/~bwatt/
> > All I do is plug them in and both machines see it as another drive.
>
> Hiya Bill,
> Actually thats exactly what I do, no different, and find it super.
> My problem I was faced with was a large amount of files
> on my Win98se (both on the C drive and second internal drive the D drive)
> Following your (and mine) route, win 98se only transfers at USB1.1
> So say 80Gb would have been painfully slow. (probably 6 hours)
>
> I have about 6 or so external drives and I hot swap them all the time.
>
> I didn't ever think I'd say this, but once 98 is emptied
> I'll archive the machine, if only for the fact working
> with USB's are such a pain ( re boot etc)
>
>
>
>
>
>
>
>
>
>
>

 

[buffalo rider]

Hi rod,

Perhaps you have already solved your problem and got the data transferred.
If not, here is my two cents. I have transferred data many times between two
computers, even as much as 10-20GB of data from an old (>10 years old) system
to a new system. I do it through the Ethernet connections. It is very fast,
it is easy to do. In one case I transferred data from a 1994 computer (60mHz
Pentium) running Win98 to a new 2006 system running WinXP.

In short here is what you need:
a. both computers must have an Ethernet card.
-- for the 1994 computer, I found one at Fry's for $2. (Yes, two
dollars)
typically they are about $10. Used parts stores will have them.
-- most computers today come with one.
b. Go to Control Panel->Network Connections
-- while there, go to the 'identity' tab and make sure both computers
have the same workgroup, like ROD_GROUP
-- turn on 'file-sharing' for at least one of the two computers,
preferably
for both. Then one computer can 'see' a folder on the other and
put
things in it through the Ethernet connection.
-- you can used the computers 'shared folder' which is automatically
set up
for sharing. Or you can create a new folder (like 'Transferred
files') and
then right click on teh folder, click on teh shared folder option.
c. Get a 'crossover' Ethernet cable. (A regular Ethernet cable will not
work).
d. Connect the two computers to each other with the crossover cable.
e. You should then, through either "network Neighborhood" or via the
Windows Explorer network options, see the other computer through
the WorkGroup (Rod_Group) and see the file(s) that are designated
as share files.

Then, just cut and paste ... walk away do your regular work, come back when
the file transfer is done.

- Scott.

"rod" wrote:

> I have a Win98se box,
> can I remove the HDD,
> and hook it up as an external HDD on my XP?
> I need to employ USB2 to move 300,000
> images over to my XP.
> Any warnings or "heads up" ?
> Thanks very much.
>
>
>
>
>

 

[rod]

Cheers BR
well only the data from my 2nd internal HDD
not the OS drive as yet, been busy marking son's homework.

Thanks for the info, I combine all the posts and use them for reference
probably next week.
Frankly, I will probably just hoik out the drive and place in external case,
because I don't think the situation will arise again transferring from W98
It was a good OS but XP has won me over.

The fastest transfer I have seen, I employed a techie a few years ago
to clone my 98se as a backup on a second computer.
He used IIRC Norton Ghost and copied my entire computer
over in around 20 minutes, I was amazed.


"buffalo rider" <buffalorider@discussions.microsoft.com> wrote in message
news:7CEAC11A-50E6-4154-8774-43512CFCBE7C@microsoft.com...
> Hi rod,
>
> Perhaps you have already solved your problem and got the data transferred.
> If not, here is my two cents. I have transferred data many times between
> two
> computers, even as much as 10-20GB of data from an old (>10 years old)
> system
> to a new system. I do it through the Ethernet connections. It is very
> fast,
> it is easy to do. In one case I transferred data from a 1994 computer
> (60mHz
> Pentium) running Win98 to a new 2006 system running WinXP.
>
> In short here is what you need:
> a. both computers must have an Ethernet card.
> -- for the 1994 computer, I found one at Fry's for $2. (Yes, two
> dollars)
> typically they are about $10. Used parts stores will have them.
> -- most computers today come with one.
> b. Go to Control Panel->Network Connections
> -- while there, go to the 'identity' tab and make sure both computers
> have the same workgroup, like ROD_GROUP
> -- turn on 'file-sharing' for at least one of the two computers,
> preferably
> for both. Then one computer can 'see' a folder on the other and
> put
> things in it through the Ethernet connection.
> -- you can used the computers 'shared folder' which is automatically
> set up
> for sharing. Or you can create a new folder (like 'Transferred
> files') and
> then right click on teh folder, click on teh shared folder
> option.
> c. Get a 'crossover' Ethernet cable. (A regular Ethernet cable will
> not
> work).
> d. Connect the two computers to each other with the crossover cable.
> e. You should then, through either "network Neighborhood" or via the
> Windows Explorer network options, see the other computer through
> the WorkGroup (Rod_Group) and see the file(s) that are designated
> as share files.
>
> Then, just cut and paste ... walk away do your regular work, come back
> when
> the file transfer is done.
>
> - Scott.
>
> "rod" wrote:
>
>> I have a Win98se box,
>> can I remove the HDD,
>> and hook it up as an external HDD on my XP?
>> I need to employ USB2 to move 300,000
>> images over to my XP.
>> Any warnings or "heads up" ?
>> Thanks very much.
>>
>>
>>
>>
>>

 

[buffalo rider]

there are a variety of ways to transfer the data ... some advantages of
learning the Ethernet way of doing it, are that Ethernet will be around for a
long time to come, learning how to do it can help one in setting up
high-speed internet, it is needed for setting up a network printer (if one
wants one printer for the house, not one for every computer), for setting up
a router so all computers in the house can talk to the Internet (i.e., one
only needs one Internet account), etc. ... not to mention having the skill to
transfer data from computer-to-compuer at some date in the future. So the
investment in learning how to move data around via Ethernet (in a home
environment) has some long-term advantages.

- Scott.

"rod" wrote:

> Cheers BR
> well only the data from my 2nd internal HDD
> not the OS drive as yet, been busy marking son's homework.
>
> Thanks for the info, I combine all the posts and use them for reference
> probably next week.
> Frankly, I will probably just hoik out the drive and place in external case,
> because I don't think the situation will arise again transferring from W98
> It was a good OS but XP has won me over.
>
> The fastest transfer I have seen, I employed a techie a few years ago
> to clone my 98se as a backup on a second computer.
> He used IIRC Norton Ghost and copied my entire computer
> over in around 20 minutes, I was amazed.
>
>
> "buffalo rider" <buffalorider@discussions.microsoft.com> wrote in message
> news:7CEAC11A-50E6-4154-8774-43512CFCBE7C@microsoft.com...
> > Hi rod,
> >
> > Perhaps you have already solved your problem and got the data transferred.
> > If not, here is my two cents. I have transferred data many times between
> > two
> > computers, even as much as 10-20GB of data from an old (>10 years old)
> > system
> > to a new system. I do it through the Ethernet connections. It is very
> > fast,
> > it is easy to do. In one case I transferred data from a 1994 computer
> > (60mHz
> > Pentium) running Win98 to a new 2006 system running WinXP.
> >
> > In short here is what you need:
> > a. both computers must have an Ethernet card.
> > -- for the 1994 computer, I found one at Fry's for $2. (Yes, two
> > dollars)
> > typically they are about $10. Used parts stores will have them.
> > -- most computers today come with one.
> > b. Go to Control Panel->Network Connections
> > -- while there, go to the 'identity' tab and make sure both computers
> > have the same workgroup, like ROD_GROUP
> > -- turn on 'file-sharing' for at least one of the two computers,
> > preferably
> > for both. Then one computer can 'see' a folder on the other and
> > put
> > things in it through the Ethernet connection.
> > -- you can used the computers 'shared folder' which is automatically
> > set up
> > for sharing. Or you can create a new folder (like 'Transferred
> > files') and
> > then right click on teh folder, click on teh shared folder
> > option.
> > c. Get a 'crossover' Ethernet cable. (A regular Ethernet cable will
> > not
> > work).
> > d. Connect the two computers to each other with the crossover cable.
> > e. You should then, through either "network Neighborhood" or via the
> > Windows Explorer network options, see the other computer through
> > the WorkGroup (Rod_Group) and see the file(s) that are designated
> > as share files.
> >
> > Then, just cut and paste ... walk away do your regular work, come back
> > when
> > the file transfer is done.
> >
> > - Scott.
> >
> > "rod" wrote:
> >
> >> I have a Win98se box,
> >> can I remove the HDD,
> >> and hook it up as an external HDD on my XP?
> >> I need to employ USB2 to move 300,000
> >> images over to my XP.
> >> Any warnings or "heads up" ?
> >> Thanks very much.
> >>
> >>
> >>
> >>
> >>
>
>
>

 

[rod]

Gotcha Scott,
this week will be the first to hook up 2 XP via wireless
prior, between 98se and XP, we had lots of probs.
Thanks very much for the advice.
R



"buffalo rider" <buffalorider@discussions.microsoft.com> wrote in message
news:238434F7-1B72-4E46-A493-4651AA8C48D1@microsoft.com...
> there are a variety of ways to transfer the data ... some advantages of
> learning the Ethernet way of doing it, are that Ethernet will be around
> for a
> long time to come, learning how to do it can help one in setting up
> high-speed internet, it is needed for setting up a network printer (if one
> wants one printer for the house, not one for every computer), for setting
> up
> a router so all computers in the house can talk to the Internet (i.e., one
> only needs one Internet account), etc. ... not to mention having the skill
> to
> transfer data from computer-to-compuer at some date in the future. So the
> investment in learning how to move data around via Ethernet (in a home
> environment) has some long-term advantages.
>
> - Scott.
>
> "rod" wrote:
>
>> Cheers BR
>> well only the data from my 2nd internal HDD
>> not the OS drive as yet, been busy marking son's homework.
>>
>> Thanks for the info, I combine all the posts and use them for reference
>> probably next week.
>> Frankly, I will probably just hoik out the drive and place in external
>> case,
>> because I don't think the situation will arise again transferring from
>> W98
>> It was a good OS but XP has won me over.
>>
>> The fastest transfer I have seen, I employed a techie a few years ago
>> to clone my 98se as a backup on a second computer.
>> He used IIRC Norton Ghost and copied my entire computer
>> over in around 20 minutes, I was amazed.
>>
>>
>> "buffalo rider" <buffalorider@discussions.microsoft.com> wrote in message
>> news:7CEAC11A-50E6-4154-8774-43512CFCBE7C@microsoft.com...
>> > Hi rod,
>> >
>> > Perhaps you have already solved your problem and got the data
>> > transferred.
>> > If not, here is my two cents. I have transferred data many times
>> > between
>> > two
>> > computers, even as much as 10-20GB of data from an old (>10 years old)
>> > system
>> > to a new system. I do it through the Ethernet connections. It is very
>> > fast,
>> > it is easy to do. In one case I transferred data from a 1994 computer
>> > (60mHz
>> > Pentium) running Win98 to a new 2006 system running WinXP.
>> >
>> > In short here is what you need:
>> > a. both computers must have an Ethernet card.
>> > -- for the 1994 computer, I found one at Fry's for $2. (Yes, two
>> > dollars)
>> > typically they are about $10. Used parts stores will have
>> > them.
>> > -- most computers today come with one.
>> > b. Go to Control Panel->Network Connections
>> > -- while there, go to the 'identity' tab and make sure both
>> > computers
>> > have the same workgroup, like ROD_GROUP
>> > -- turn on 'file-sharing' for at least one of the two computers,
>> > preferably
>> > for both. Then one computer can 'see' a folder on the other
>> > and
>> > put
>> > things in it through the Ethernet connection.
>> > -- you can used the computers 'shared folder' which is
>> > automatically
>> > set up
>> > for sharing. Or you can create a new folder (like 'Transferred
>> > files') and
>> > then right click on teh folder, click on teh shared folder
>> > option.
>> > c. Get a 'crossover' Ethernet cable. (A regular Ethernet cable will
>> > not
>> > work).
>> > d. Connect the two computers to each other with the crossover cable.
>> > e. You should then, through either "network Neighborhood" or via the
>> > Windows Explorer network options, see the other computer through
>> > the WorkGroup (Rod_Group) and see the file(s) that are
>> > designated
>> > as share files.
>> >
>> > Then, just cut and paste ... walk away do your regular work, come back
>> > when
>> > the file transfer is done.
>> >
>> > - Scott.
>> >
>> > "rod" wrote:
>> >
>> >> I have a Win98se box,
>> >> can I remove the HDD,
>> >> and hook it up as an external HDD on my XP?
>> >> I need to employ USB2 to move 300,000
>> >> images over to my XP.
>> >> Any warnings or "heads up" ?
>> >> Thanks very much.
>> >>
>> >>
>> >>
>> >>
>> >>
>>
>>
>>