S
ScottColling
Hi there,When I upgraded my motherboard several years ago, I forgot to check that the SATA controller was able to use RAID. I have two 2TB HDDs setup in RAID1 and previously it was using a hardware setup but with the new motherboard I used the Windows partition tool to create a RAID1 volume using the two 2TB HDDs.Fast forward to now and I've just put some important information on there and thought I would check the RAID volume status. However I cannot work it if it is correctly working or not, it shows a dynamic disk and healthy but I cannot work out anyway to see if both disks are still in th
Continue reading...
Continue reading...