K
kilacali11
Server has consistently logged the following errors:
W32Time, Event ID: 38
The time provider NtpClient cannot reach or is currently receiving invalid
time data from *server_address*(ntp.m|0x1|192.168.37.15|->*IP_Address*:123).
W32Time, Event ID: 47
Time Provider NtpClient: No valid response has been received from manually
configured peer *Server_Address*,0x0
after 8 attempts to contact it. This peer will be discarded as a time source
and NtpClient will attempt to
discover a new peer wiht this DNS Name.
W32Time, Event ID: 29
The time provider NtpClient si configured to acquire time from one or more
time sources, however none of the
sources are currently accessible. No attempt to contact a source will be
made for *(Value varies)* minutes. NtpClient has no source of accurate time.
Each instance where an attempt is made to validate the time, the above
errors occur within minutes of each other.
Some information / Some things I've already tried:
-Server's W32Time Parameters show the type as NTP.
-The different time services I've attempted are NTP servers. They can all be
pinged by the server successfully.
-I used the command prompt to send requests to each address in both Symmetic
Active Mode and Client PC.
-All outbound ports are open, port 123 UDP is allowed by the firewall.
Any help on the matter would be greatly appreciated. Thank you
W32Time, Event ID: 38
The time provider NtpClient cannot reach or is currently receiving invalid
time data from *server_address*(ntp.m|0x1|192.168.37.15|->*IP_Address*:123).
W32Time, Event ID: 47
Time Provider NtpClient: No valid response has been received from manually
configured peer *Server_Address*,0x0
after 8 attempts to contact it. This peer will be discarded as a time source
and NtpClient will attempt to
discover a new peer wiht this DNS Name.
W32Time, Event ID: 29
The time provider NtpClient si configured to acquire time from one or more
time sources, however none of the
sources are currently accessible. No attempt to contact a source will be
made for *(Value varies)* minutes. NtpClient has no source of accurate time.
Each instance where an attempt is made to validate the time, the above
errors occur within minutes of each other.
Some information / Some things I've already tried:
-Server's W32Time Parameters show the type as NTP.
-The different time services I've attempted are NTP servers. They can all be
pinged by the server successfully.
-I used the command prompt to send requests to each address in both Symmetic
Active Mode and Client PC.
-All outbound ports are open, port 123 UDP is allowed by the firewall.
Any help on the matter would be greatly appreciated. Thank you