N
Nostralls
Hello just built a brand spanking new PC, quite a nice spec,
*Intel Core 2 Quad Q6600 G0 Stepping (2.4GHz 1066MHz) Socket 775 L2 8MB
Cache (2x4MB (4MB per core pair)*
Asus P5N-E SLI 650i Socket 775 PCI-E Onboard Audio ATX Motherboard
*1 x Kingston 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 Memory Non-ecc CL5
Unbuffered 1.8V*
Maxtor STM3250310AS 250GB SATAII 8MB Cache + 160GB Back up Drive out of
old computer, IDE.
Zotac 8800GT 512MB DDR3 Dual DVI HDTV Out PCI-E Graphics Card
Microsoft Windows Vista Home Premium.
Samsung SH-S223F 22X DVD±RW/RAM/DL Serial ATA Black Bare Drive
EV Black Mid Tower Gaming Case with Massive
Hi-Power Black 700W 14cm Blue LED Fan PSU
Since I put it together I have had a few problems with the system
itself, being a lot slower than I expected it to be, and in idle mode
its using approx 30%-50% of the Ram according to the file in my side
bar, is this normal to use so much ram?
Also when using the internet and several other files this morning like
my computer & my documents, it would stop and then say "Not Responding"
go pale then come back 20 - 30 secs later. This was the first time I had
connected it to the internet so was downloading lots of updates, but
still, a nice spec PC, I expected to deal a lot better.
Also sometimes when I boot up Windows, it takes ages, sometimes my
monitor goes into standby mode it takes that long. Is this normal? Also
had a blue screen fatal error message this morning, but it restarted
itself.
Could this be either a memory or a software issue? Too little memory?
Or could this be basically Windows upto its old tricks? Is it worth
maybe trying a reinstall?
On my boot up screen it also says that my primary hard drive is in Sata
3 or something, could this be an issue? Or would this not matter?
I am very new to this building game so any advice you could give me
would be seriously gratefully recieved?
Nick
--
Nostralls
*Intel Core 2 Quad Q6600 G0 Stepping (2.4GHz 1066MHz) Socket 775 L2 8MB
Cache (2x4MB (4MB per core pair)*
Asus P5N-E SLI 650i Socket 775 PCI-E Onboard Audio ATX Motherboard
*1 x Kingston 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 Memory Non-ecc CL5
Unbuffered 1.8V*
Maxtor STM3250310AS 250GB SATAII 8MB Cache + 160GB Back up Drive out of
old computer, IDE.
Zotac 8800GT 512MB DDR3 Dual DVI HDTV Out PCI-E Graphics Card
Microsoft Windows Vista Home Premium.
Samsung SH-S223F 22X DVD±RW/RAM/DL Serial ATA Black Bare Drive
EV Black Mid Tower Gaming Case with Massive
Hi-Power Black 700W 14cm Blue LED Fan PSU
Since I put it together I have had a few problems with the system
itself, being a lot slower than I expected it to be, and in idle mode
its using approx 30%-50% of the Ram according to the file in my side
bar, is this normal to use so much ram?
Also when using the internet and several other files this morning like
my computer & my documents, it would stop and then say "Not Responding"
go pale then come back 20 - 30 secs later. This was the first time I had
connected it to the internet so was downloading lots of updates, but
still, a nice spec PC, I expected to deal a lot better.
Also sometimes when I boot up Windows, it takes ages, sometimes my
monitor goes into standby mode it takes that long. Is this normal? Also
had a blue screen fatal error message this morning, but it restarted
itself.
Could this be either a memory or a software issue? Too little memory?
Or could this be basically Windows upto its old tricks? Is it worth
maybe trying a reinstall?
On my boot up screen it also says that my primary hard drive is in Sata
3 or something, could this be an issue? Or would this not matter?
I am very new to this building game so any advice you could give me
would be seriously gratefully recieved?
Nick
--
Nostralls