Guest craig Posted July 12, 2007 Posted July 12, 2007 I performed an automated upodate to install security patches etc, and an NVidia network card update. After rebooting, windows failed to start and times out and shuts down after the black screen with the loading bar. The logo does not appear, just the bars. I was able to get a completely black screen with a cursor at one point, but that was it. My vista disc is at home (600 miles away) and i am out of state for the summer. Any help?
Guest RClaeson Posted July 13, 2007 Posted July 13, 2007 I have the same problem. I had MS Support on the phone for three hours. The problem seems to be related to the Tuesday set of patches. Tech support said to not install KB928365 and KB928366. I do not find either in the list of patches. It would help me to find out which patches were released on Tuesday. "craig" wrote: > I performed an automated upodate to install security patches etc, and an > NVidia network card update. After rebooting, windows failed to start and > times out and shuts down after the black screen with the loading bar. The > logo does not appear, just the bars. I was able to get a completely black > screen with a cursor at one point, but that was it. My vista disc is at home > (600 miles away) and i am out of state for the summer. Any help?
Guest realcestmoi Posted July 13, 2007 Posted July 13, 2007 Hi there, Taking driver updates from windows updte is really a bad idea unless you like problems. Try usung system restore, boot last known good configuration or roll back on the driver. If a driver update is needed ( ONLY if the hardware is not working proper!) you should take it from the manufacturers website. Best regards, Michel Denie "craig" <craig@discussions.microsoft.com> wrote in message news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... >I performed an automated upodate to install security patches etc, and an > NVidia network card update. After rebooting, windows failed to start and > times out and shuts down after the black screen with the loading bar. The > logo does not appear, just the bars. I was able to get a completely black > screen with a cursor at one point, but that was it. My vista disc is at > home > (600 miles away) and i am out of state for the summer. Any help?
Guest craig Posted July 13, 2007 Posted July 13, 2007 last known configuration doesn't work, just hangs on me. and can i do a system restore without the vista disc? i haven't been able to figure out otherwise. the real problem is that i don't have my cd, and i'm not living in my home state this summer. i'd hate to have to fly back to get a cd. thanks for the advice. i'll remember to not trust the updates next time. (posting from work) "realcestmoi" wrote: > Hi there, > > Taking driver updates from windows updte is really a bad idea unless you > like problems. > > Try usung system restore, boot last known good configuration or roll back on > the driver. > > If a driver update is needed ( ONLY if the hardware is not working proper!) > you should take it from the manufacturers website. > > Best regards, > Michel Denie > > "craig" <craig@discussions.microsoft.com> wrote in message > news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... > >I performed an automated upodate to install security patches etc, and an > > NVidia network card update. After rebooting, windows failed to start and > > times out and shuts down after the black screen with the loading bar. The > > logo does not appear, just the bars. I was able to get a completely black > > screen with a cursor at one point, but that was it. My vista disc is at > > home > > (600 miles away) and i am out of state for the summer. Any help? > > >
Guest craig Posted July 13, 2007 Posted July 13, 2007 were toy able to get back on your computer at all? i'm limited to posting from work at this point. "RClaeson" wrote: > I have the same problem. I had MS Support on the phone for three hours. The > problem seems to be related to the Tuesday set of patches. Tech support said > to not install KB928365 and KB928366. I do not find either in the list of > patches. It would help me to find out which patches were released on Tuesday. > > "craig" wrote: > > > I performed an automated upodate to install security patches etc, and an > > NVidia network card update. After rebooting, windows failed to start and > > times out and shuts down after the black screen with the loading bar. The > > logo does not appear, just the bars. I was able to get a completely black > > screen with a cursor at one point, but that was it. My vista disc is at home > > (600 miles away) and i am out of state for the summer. Any help?
Guest RClaeson Posted July 13, 2007 Posted July 13, 2007 I have been through the revert to previous, repair, reinstall, format and reinstall. My next tactic is to reinstall the patches one at at time until I find the culprit. I have been unable to restart without a full quick format and reinstall. Robert "craig" wrote: > last known configuration doesn't work, just hangs on me. and can i do a > system restore without the vista disc? i haven't been able to figure out > otherwise. > the real problem is that i don't have my cd, and i'm not living in my home > state this summer. i'd hate to have to fly back to get a cd. > > thanks for the advice. i'll remember to not trust the updates next time. > > (posting from work) > > "realcestmoi" wrote: > > > Hi there, > > > > Taking driver updates from windows updte is really a bad idea unless you > > like problems. > > > > Try usung system restore, boot last known good configuration or roll back on > > the driver. > > > > If a driver update is needed ( ONLY if the hardware is not working proper!) > > you should take it from the manufacturers website. > > > > Best regards, > > Michel Denie > > > > "craig" <craig@discussions.microsoft.com> wrote in message > > news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... > > >I performed an automated upodate to install security patches etc, and an > > > NVidia network card update. After rebooting, windows failed to start and > > > times out and shuts down after the black screen with the loading bar. The > > > logo does not appear, just the bars. I was able to get a completely black > > > screen with a cursor at one point, but that was it. My vista disc is at > > > home > > > (600 miles away) and i am out of state for the summer. Any help? > > > > > >
Guest bronorb Posted July 13, 2007 Posted July 13, 2007 Before you reinstall XP read through this article: http://webcast.broadcastnewsroom.com/articles/viewarticle.jsp?id=8658 I followed the steps there and got my system back to the point right before I lost it. It takes a while and only do it if you feel comfortable with the procedures. It assumes that you have the XP setup disk. Good luck. "RClaeson" wrote: > I have been through the revert to previous, repair, reinstall, format and > reinstall. My next tactic is to reinstall the patches one at at time until I > find the culprit. I have been unable to restart without a full quick format > and reinstall. > > Robert > > "craig" wrote: > > > last known configuration doesn't work, just hangs on me. and can i do a > > system restore without the vista disc? i haven't been able to figure out > > otherwise. > > the real problem is that i don't have my cd, and i'm not living in my home > > state this summer. i'd hate to have to fly back to get a cd. > > > > thanks for the advice. i'll remember to not trust the updates next time. > > > > (posting from work) > > > > "realcestmoi" wrote: > > > > > Hi there, > > > > > > Taking driver updates from windows updte is really a bad idea unless you > > > like problems. > > > > > > Try usung system restore, boot last known good configuration or roll back on > > > the driver. > > > > > > If a driver update is needed ( ONLY if the hardware is not working proper!) > > > you should take it from the manufacturers website. > > > > > > Best regards, > > > Michel Denie > > > > > > "craig" <craig@discussions.microsoft.com> wrote in message > > > news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... > > > >I performed an automated upodate to install security patches etc, and an > > > > NVidia network card update. After rebooting, windows failed to start and > > > > times out and shuts down after the black screen with the loading bar. The > > > > logo does not appear, just the bars. I was able to get a completely black > > > > screen with a cursor at one point, but that was it. My vista disc is at > > > > home > > > > (600 miles away) and i am out of state for the summer. Any help? > > > > > > > > >
Guest craig Posted July 13, 2007 Posted July 13, 2007 vista. this is posted under the "windows vista community" "bronorb" wrote: > Before you reinstall XP read through this article: > http://webcast.broadcastnewsroom.com/articles/viewarticle.jsp?id=8658 > > I followed the steps there and got my system back to the point right before > I lost it. It takes a while and only do it if you feel comfortable with the > procedures. > It assumes that you have the XP setup disk. > > Good luck. > > > "RClaeson" wrote: > > > I have been through the revert to previous, repair, reinstall, format and > > reinstall. My next tactic is to reinstall the patches one at at time until I > > find the culprit. I have been unable to restart without a full quick format > > and reinstall. > > > > Robert > > > > "craig" wrote: > > > > > last known configuration doesn't work, just hangs on me. and can i do a > > > system restore without the vista disc? i haven't been able to figure out > > > otherwise. > > > the real problem is that i don't have my cd, and i'm not living in my home > > > state this summer. i'd hate to have to fly back to get a cd. > > > > > > thanks for the advice. i'll remember to not trust the updates next time. > > > > > > (posting from work) > > > > > > "realcestmoi" wrote: > > > > > > > Hi there, > > > > > > > > Taking driver updates from windows updte is really a bad idea unless you > > > > like problems. > > > > > > > > Try usung system restore, boot last known good configuration or roll back on > > > > the driver. > > > > > > > > If a driver update is needed ( ONLY if the hardware is not working proper!) > > > > you should take it from the manufacturers website. > > > > > > > > Best regards, > > > > Michel Denie > > > > > > > > "craig" <craig@discussions.microsoft.com> wrote in message > > > > news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... > > > > >I performed an automated upodate to install security patches etc, and an > > > > > NVidia network card update. After rebooting, windows failed to start and > > > > > times out and shuts down after the black screen with the loading bar. The > > > > > logo does not appear, just the bars. I was able to get a completely black > > > > > screen with a cursor at one point, but that was it. My vista disc is at > > > > > home > > > > > (600 miles away) and i am out of state for the summer. Any help? > > > > > > > > > > > >
Guest RClaeson Posted July 16, 2007 Posted July 16, 2007 For me it appears to be update KB936357 is causing the problem. I have a 233 MHz MMX processor. It appears the microcode changes in that patch do not run on an MMX processor. I ended up doing a quick format and a clean install to get going. I now need to figure out how to restore the pieces which were destroyed. I am expecting a followup call from MS sometime tomorrow, Monday. Bob "craig" wrote: > vista. this is posted under the "windows vista community" > > "bronorb" wrote: > > > Before you reinstall XP read through this article: > > http://webcast.broadcastnewsroom.com/articles/viewarticle.jsp?id=8658 > > > > I followed the steps there and got my system back to the point right before > > I lost it. It takes a while and only do it if you feel comfortable with the > > procedures. > > It assumes that you have the XP setup disk. > > > > Good luck. > > > > > > "RClaeson" wrote: > > > > > I have been through the revert to previous, repair, reinstall, format and > > > reinstall. My next tactic is to reinstall the patches one at at time until I > > > find the culprit. I have been unable to restart without a full quick format > > > and reinstall. > > > > > > Robert > > > > > > "craig" wrote: > > > > > > > last known configuration doesn't work, just hangs on me. and can i do a > > > > system restore without the vista disc? i haven't been able to figure out > > > > otherwise. > > > > the real problem is that i don't have my cd, and i'm not living in my home > > > > state this summer. i'd hate to have to fly back to get a cd. > > > > > > > > thanks for the advice. i'll remember to not trust the updates next time. > > > > > > > > (posting from work) > > > > > > > > "realcestmoi" wrote: > > > > > > > > > Hi there, > > > > > > > > > > Taking driver updates from windows updte is really a bad idea unless you > > > > > like problems. > > > > > > > > > > Try usung system restore, boot last known good configuration or roll back on > > > > > the driver. > > > > > > > > > > If a driver update is needed ( ONLY if the hardware is not working proper!) > > > > > you should take it from the manufacturers website. > > > > > > > > > > Best regards, > > > > > Michel Denie > > > > > > > > > > "craig" <craig@discussions.microsoft.com> wrote in message > > > > > news:DF0E1A93-33F1-4306-97B8-C07B067F3B6B@microsoft.com... > > > > > >I performed an automated upodate to install security patches etc, and an > > > > > > NVidia network card update. After rebooting, windows failed to start and > > > > > > times out and shuts down after the black screen with the loading bar. The > > > > > > logo does not appear, just the bars. I was able to get a completely black > > > > > > screen with a cursor at one point, but that was it. My vista disc is at > > > > > > home > > > > > > (600 miles away) and i am out of state for the summer. Any help? > > > > > > > > > > > > > > >
Recommended Posts