Guest Jim Posted July 14, 2007 Posted July 14, 2007 Hi, Over the last several days I have tried to get the update shown below to work and it always fails. Any help would be appreciated. Thanks, Jim Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)
Guest vet@ponyexpressvet.com Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: > Hi, > Over the last several days I have tried to get the update shown below to > work and it always fails. Any help would be appreciated. > Thanks, Jim > > Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 > (KB928366) The fix has been posted in several threads. Basically you need to clean out all version of Framework and reinstall them including the service packs prior to updating. You need windows installer cleanup tool and the framework removal tool to remove Framework. You can directly download the Framework packages including the service packs, install them then do the update. The problem you have I suspect is that you do not have SP1 installed. I know it would seem easier to just install the service pack then the update but that does not work, you need to start from scratch.
Guest Jim Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP All I had to do was download dotnetfx and run it and I was able to complete my updates. "vet@ponyexpressvet.com" wrote: > On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: > > Hi, > > Over the last several days I have tried to get the update shown below to > > work and it always fails. Any help would be appreciated. > > Thanks, Jim > > > > Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 > > (KB928366) > > The fix has been posted in several threads. Basically you need to > clean out all version of Framework and reinstall them including the > service packs prior to updating. > > You need windows installer cleanup tool and the framework removal tool > to remove Framework. You can directly download the Framework packages > including the service packs, install them then do the update. > > The problem you have I suspect is that you do not have SP1 installed. > I know it would seem easier to just install the service pack then the > update but that does not work, you need to start from scratch. > >
Guest Jim Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP Why isn't there a relatively simple fix for this problem? Doesn't Microsoft read these postings? Where do I find dotnetfx? Thanks, Jim "Jim" <Jim@discussions.microsoft.com> wrote in message news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... > All I had to do was download dotnetfx and run it and I was able to > complete > my updates. > > "vet@ponyexpressvet.com" wrote: > >> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: >> > Hi, >> > Over the last several days I have tried to get the update shown below >> > to >> > work and it always fails. Any help would be appreciated. >> > Thanks, Jim >> > >> > Security Update for Microsoft .NET Framework, Version 1.1 Service Pack >> > 1 >> > (KB928366) >> >> The fix has been posted in several threads. Basically you need to >> clean out all version of Framework and reinstall them including the >> service packs prior to updating. >> >> You need windows installer cleanup tool and the framework removal tool >> to remove Framework. You can directly download the Framework packages >> including the service packs, install them then do the update. >> >> The problem you have I suspect is that you do not have SP1 installed. >> I know it would seem easier to just install the service pack then the >> update but that does not work, you need to start from scratch. >> >>
Guest Jim Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP http://www.microsoft.com/downloads/details.aspx?familyid=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en Go here "Jim" wrote: > Why isn't there a relatively simple fix for this problem? Doesn't Microsoft > read these postings? Where do I find dotnetfx? > > Thanks, Jim > > "Jim" <Jim@discussions.microsoft.com> wrote in message > news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... > > All I had to do was download dotnetfx and run it and I was able to > > complete > > my updates. > > > > "vet@ponyexpressvet.com" wrote: > > > >> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: > >> > Hi, > >> > Over the last several days I have tried to get the update shown below > >> > to > >> > work and it always fails. Any help would be appreciated. > >> > Thanks, Jim > >> > > >> > Security Update for Microsoft .NET Framework, Version 1.1 Service Pack > >> > 1 > >> > (KB928366) > >> > >> The fix has been posted in several threads. Basically you need to > >> clean out all version of Framework and reinstall them including the > >> service packs prior to updating. > >> > >> You need windows installer cleanup tool and the framework removal tool > >> to remove Framework. You can directly download the Framework packages > >> including the service packs, install them then do the update. > >> > >> The problem you have I suspect is that you do not have SP1 installed. > >> I know it would seem easier to just install the service pack then the > >> update but that does not work, you need to start from scratch. > >> > >> > > >
Guest Jim Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP Hey Jim, I went to the site you suggested and downloaded the file shown. No success. Any more ideas? Thanks, Jim "Jim" <Jim@discussions.microsoft.com> wrote in message news:94D42A4F-14D1-4DE2-80E0-8036504B132E@microsoft.com... > http://www.microsoft.com/downloads/details.aspx?familyid=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en > > Go here > > "Jim" wrote: > >> Why isn't there a relatively simple fix for this problem? Doesn't >> Microsoft >> read these postings? Where do I find dotnetfx? >> >> Thanks, Jim >> >> "Jim" <Jim@discussions.microsoft.com> wrote in message >> news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... >> > All I had to do was download dotnetfx and run it and I was able to >> > complete >> > my updates. >> > >> > "vet@ponyexpressvet.com" wrote: >> > >> >> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: >> >> > Hi, >> >> > Over the last several days I have tried to get the update shown >> >> > below >> >> > to >> >> > work and it always fails. Any help would be appreciated. >> >> > Thanks, Jim >> >> > >> >> > Security Update for Microsoft .NET Framework, Version 1.1 Service >> >> > Pack >> >> > 1 >> >> > (KB928366) >> >> >> >> The fix has been posted in several threads. Basically you need to >> >> clean out all version of Framework and reinstall them including the >> >> service packs prior to updating. >> >> >> >> You need windows installer cleanup tool and the framework removal tool >> >> to remove Framework. You can directly download the Framework packages >> >> including the service packs, install them then do the update. >> >> >> >> The problem you have I suspect is that you do not have SP1 installed. >> >> I know it would seem easier to just install the service pack then the >> >> update but that does not work, you need to start from scratch. >> >> >> >> >> >> >>
Guest Don Burnette Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP I tried it as well, no luck at all. -- Don "Jim" <jimnormabill@comcast.net> wrote in message news:%239ZSGPixHHA.4464@TK2MSFTNGP02.phx.gbl... > Hey Jim, > I went to the site you suggested and downloaded the file shown. No > success. Any more ideas? > Thanks, Jim > > "Jim" <Jim@discussions.microsoft.com> wrote in message > news:94D42A4F-14D1-4DE2-80E0-8036504B132E@microsoft.com... >> http://www.microsoft.com/downloads/details.aspx?familyid=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en >> >> Go here >> >> "Jim" wrote: >> >>> Why isn't there a relatively simple fix for this problem? Doesn't >>> Microsoft >>> read these postings? Where do I find dotnetfx? >>> >>> Thanks, Jim >>> >>> "Jim" <Jim@discussions.microsoft.com> wrote in message >>> news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... >>> > All I had to do was download dotnetfx and run it and I was able to >>> > complete >>> > my updates. >>> > >>> > "vet@ponyexpressvet.com" wrote: >>> > >>> >> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: >>> >> > Hi, >>> >> > Over the last several days I have tried to get the update shown >>> >> > below >>> >> > to >>> >> > work and it always fails. Any help would be appreciated. >>> >> > Thanks, Jim >>> >> > >>> >> > Security Update for Microsoft .NET Framework, Version 1.1 Service >>> >> > Pack >>> >> > 1 >>> >> > (KB928366) >>> >> >>> >> The fix has been posted in several threads. Basically you need to >>> >> clean out all version of Framework and reinstall them including the >>> >> service packs prior to updating. >>> >> >>> >> You need windows installer cleanup tool and the framework removal >>> >> tool >>> >> to remove Framework. You can directly download the Framework packages >>> >> including the service packs, install them then do the update. >>> >> >>> >> The problem you have I suspect is that you do not have SP1 installed. >>> >> I know it would seem easier to just install the service pack then the >>> >> update but that does not work, you need to start from scratch. >>> >> >>> >> >>> >>> >>> > >
Guest PA Bear Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP A1. You *need* to open a free Support Incident! That's how they determine the number of "dead bodies", not from newsgroup posts. Start a free Windows Update support incident request: https://support.microsoft.com/oas/default.aspx?gprid=6527 Tip: Temporarily disable real-time protection by your anti-virus and/or anti-spyware applications (e.g., CounterSpy, Spysweeper, Spybot, AVG Anti-Spyware) and/or any third-party firewall (e.g., ZA). A2. Download details: Uninstall Cleanup Tool for the .NET Framework 1.0 and ..NET Framework 1.1 updates KB928366, KB929729, and KB928367: http://www.microsoft.com/downloads/details.aspx?FamilyId=7A4EFC33-0343-4EE4-B0C4-97BD16967A09 -- ~Robear Dyer (PA Bear) MS MVP-Windows (IE, OE, Security, Shell/User) AumHa VSOP & Admin DTS-L.org Jim wrote: > Why isn't there a relatively simple fix for this problem? Doesn't > Microsoft > read these postings? Where do I find dotnetfx? > > Thanks, Jim > > "Jim" <Jim@discussions.microsoft.com> wrote in message > news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... >> All I had to do was download dotnetfx and run it and I was able to >> complete >> my updates. >> >> "vet@ponyexpressvet.com" wrote: >> >>> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: >>>> Hi, >>>> Over the last several days I have tried to get the update shown below >>>> to >>>> work and it always fails. Any help would be appreciated. >>>> Thanks, Jim >>>> >>>> Security Update for Microsoft .NET Framework, Version 1.1 Service Pack >>>> 1 >>>> (KB928366) >>> >>> The fix has been posted in several threads. Basically you need to >>> clean out all version of Framework and reinstall them including the >>> service packs prior to updating. >>> >>> You need windows installer cleanup tool and the framework removal tool >>> to remove Framework. You can directly download the Framework packages >>> including the service packs, install them then do the update. >>> >>> The problem you have I suspect is that you do not have SP1 installed. >>> I know it would seem easier to just install the service pack then the >>> update but that does not work, you need to start from scratch.
Guest Shahu Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP I think it is due to abscence of .NET Framework 1.1 Service Pack 1 Following step worked fo me: Uninstall .NET Framework 1.1, I did not uninstall ver 2.0. Ran windows installer cleanup Empty C:\windows\SoftwareDistribution Re-installed .NET Framework 1.1, then Service Pack 1 Windows update page to check for any update, here it found update "Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)" Installed successfully Hope it may resolve other's problem "vet@ponyexpressvet.com" wrote: > On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: > > Hi, > > Over the last several days I have tried to get the update shown below to > > work and it always fails. Any help would be appreciated. > > Thanks, Jim > > > > Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 > > (KB928366) > > The fix has been posted in several threads. Basically you need to > clean out all version of Framework and reinstall them including the > service packs prior to updating. > > You need windows installer cleanup tool and the framework removal tool > to remove Framework. You can directly download the Framework packages > including the service packs, install them then do the update. > > The problem you have I suspect is that you do not have SP1 installed. > I know it would seem easier to just install the service pack then the > update but that does not work, you need to start from scratch. > >
Guest Jim Posted July 14, 2007 Posted July 14, 2007 Re: .NET Update Continually Fails HELP I can't help you any more. That is what fixed it for me. "Jim" wrote: > Hey Jim, > I went to the site you suggested and downloaded the file shown. No success. > Any more ideas? > Thanks, Jim > > "Jim" <Jim@discussions.microsoft.com> wrote in message > news:94D42A4F-14D1-4DE2-80E0-8036504B132E@microsoft.com... > > http://www.microsoft.com/downloads/details.aspx?familyid=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en > > > > Go here > > > > "Jim" wrote: > > > >> Why isn't there a relatively simple fix for this problem? Doesn't > >> Microsoft > >> read these postings? Where do I find dotnetfx? > >> > >> Thanks, Jim > >> > >> "Jim" <Jim@discussions.microsoft.com> wrote in message > >> news:E28C35FF-3116-4CA4-925E-2D18158E6141@microsoft.com... > >> > All I had to do was download dotnetfx and run it and I was able to > >> > complete > >> > my updates. > >> > > >> > "vet@ponyexpressvet.com" wrote: > >> > > >> >> On Jul 14, 7:56 am, "Jim" <jimnormab...@comcast.net> wrote: > >> >> > Hi, > >> >> > Over the last several days I have tried to get the update shown > >> >> > below > >> >> > to > >> >> > work and it always fails. Any help would be appreciated. > >> >> > Thanks, Jim > >> >> > > >> >> > Security Update for Microsoft .NET Framework, Version 1.1 Service > >> >> > Pack > >> >> > 1 > >> >> > (KB928366) > >> >> > >> >> The fix has been posted in several threads. Basically you need to > >> >> clean out all version of Framework and reinstall them including the > >> >> service packs prior to updating. > >> >> > >> >> You need windows installer cleanup tool and the framework removal tool > >> >> to remove Framework. You can directly download the Framework packages > >> >> including the service packs, install them then do the update. > >> >> > >> >> The problem you have I suspect is that you do not have SP1 installed. > >> >> I know it would seem easier to just install the service pack then the > >> >> update but that does not work, you need to start from scratch. > >> >> > >> >> > >> > >> > >> > > >
Recommended Posts