Jump to content
Microsoft Windows Bulletin Board

Re: Update


Recommended Posts

Guest Peter Foldes
Posted

posted to the windowsupdate via crosspost

 

This was posted in the .hu xp group and translation is below

 

--

Peter

 

Please Reply to Newsgroup for the benefit of others

Requests for assistance by email can not and will not be acknowledged.

 

"Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

 

Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

Unfortunately it seems to download but when it comes to installing the installation fails.

 

I do not get any errors shown except that it say's that "Installation Failed"

 

Does anyone have a solution for this issue.

 

I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

 

Thank You

 

Laszlo

Guest TaurArian
Posted

On the WU Website, select your history of updates - now click on failed

update (red mark) and see if there is an error code.

If there is an error code, write it down and post back or in the

alternative, do a search for the error code.

 

Also you can view the Update log in Windows:-

 

Click Start, and then click Run.

In the Open box, type: %windir%\windowsupdate.log

and then click OK.

 

Scroll down towards the bottom for the latest entries to locate the error

code(s) associated with the latest failed attempt to download/install. If

appropriate copy and paste the error codes into this thread so someone may be

able to assist you. On the other hand, you may be able to find the error code

and other suggestions by searching the Newsgroup.

 

Also check Windows folder for file called KB******.log (****** = number of

update ie KB896688) and post the contents of the failed update.

This may provide further clues as to why the update failed.

 

How to read the Windowsupdate.log file:

http://support.microsoft.com/?kbid=902093

 

Additional Info:

 

You cannot install some updates or programs

http://support.microsoft.com/kb/822798

 

How to troubleshoot Windows Update, Microsoft Update, and Windows Server

Update Services installation issues:

http://support.microsoft.com/?kbid=906602

 

Windows Update Solution Center

http://support.microsoft.com/?scid=phen-us6527

 

 

 

"Peter Foldes" wrote:

> posted to the windowsupdate via crosspost

>

> This was posted in the .hu xp group and translation is below

>

> --

> Peter

>

> Please Reply to Newsgroup for the benefit of others

> Requests for assistance by email can not and will not be acknowledged.

>

> "Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

>

> Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

> Unfortunately it seems to download but when it comes to installing the installation fails.

>

> I do not get any errors shown except that it say's that "Installation Failed"

>

> Does anyone have a solution for this issue.

>

> I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

>

> Thank You

>

> Laszlo

>

Posted

I try these steps:

 

„Peter Foldes†ezt írta:

> Get Dial-a-Fix:

> http://wiki.djlizard.net/Dial-a-fix

>

> Use its options to fix:

> - Windows Installer

> - Windows Update

> - All the Registration Center options.

>

> Turn off the "Empty System32\Catroot 2"

> Do NOT do "Flush SoftwareDistribution".

>

> Then click "GO" and wait until it is done... Reboot may be needed.

>

> - Download/Install Windows Update v3.

> http://go.microsoft.com/fwlink/?LinkID=91237

> (You may need to install it using the command line switch "/wuforce" right

> after an additional reboot - immediately after logging in.)

>

> - Download/Install the 927891 patch.

> http://www.microsoft.com/downloads/details.aspx?FamilyId=7A81B0CD-A0B9-497E-8A89-404327772E5A

>

> - Reboot.

 

The result is I could use this dial-a-fix, I also could install win install

3.0, but I could not install the 927891 patch.

Here is log from this patch:

 

1.485: 2007/09/06 18:46:15.718 (local)

1.485: c:\41193da77a1526b71d5a\update\update.exe (version 6.2.29.0)

1.485: Hotfix started with following command line:

1.657: FileVersion of C:\WINDOWS\system32\msi.dll is Less Than 3.1.0000.0000

1.657: Condition Check for Line 1 of PreRequisite returned FALSE

1.657: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

1.657: A(z) KB927891 telepítője a következő hibába ütközött: A telepítés

nem folytatható, mert hiányzik KB927891 telepítésének legalább egy

előfeltétele. A hibával kapcsolatos további részleteket a következő

naplófájlban tekintheti meg: c:\windows\KB927891.log

1.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

1.688: A telepítés nem folytatható, mert hiányzik KB927891 telepítésének

legalább egy előfeltétele. A hibával kapcsolatos további részleteket a

következő naplófájlban tekintheti meg: c:\windows\KB927891.log

54.110: Message displayed to the user: A telepítés nem folytatható, mert

hiányzik KB927891 telepítésének legalább egy előfeltétele. A hibával

kapcsolatos további részleteket a következő naplófájlban tekintheti meg:

c:\windows\KB927891.log

54.110: User Input: OK

54.110: Update.exe extended error code = 0xf0f4

54.110: Update.exe return code was masked to 0x643 for MSI custom action

compliance.

 

„TaurArian†ezt írta:

> On the WU Website, select your history of updates - now click on failed

> update (red mark) and see if there is an error code.

> If there is an error code, write it down and post back or in the

> alternative, do a search for the error code.

>

> Also you can view the Update log in Windows:-

>

> Click Start, and then click Run.

> In the Open box, type: %windir%\windowsupdate.log

> and then click OK.

>

> Scroll down towards the bottom for the latest entries to locate the error

> code(s) associated with the latest failed attempt to download/install. If

> appropriate copy and paste the error codes into this thread so someone may be

> able to assist you. On the other hand, you may be able to find the error code

> and other suggestions by searching the Newsgroup.

>

> Also check Windows folder for file called KB******.log (****** = number of

> update ie KB896688) and post the contents of the failed update.

> This may provide further clues as to why the update failed.

>

> How to read the Windowsupdate.log file:

> http://support.microsoft.com/?kbid=902093

>

> Additional Info:

>

> You cannot install some updates or programs

> http://support.microsoft.com/kb/822798

>

> How to troubleshoot Windows Update, Microsoft Update, and Windows Server

> Update Services installation issues:

> http://support.microsoft.com/?kbid=906602

>

> Windows Update Solution Center

> http://support.microsoft.com/?scid=phen-us6527

>

>

>

> "Peter Foldes" wrote:

>

> > posted to the windowsupdate via crosspost

> >

> > This was posted in the .hu xp group and translation is below

> >

> > --

> > Peter

> >

> > Please Reply to Newsgroup for the benefit of others

> > Requests for assistance by email can not and will not be acknowledged.

> >

> > "Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

> >

> > Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

> > Unfortunately it seems to download but when it comes to installing the installation fails.

> >

> > I do not get any errors shown except that it say's that "Installation Failed"

> >

> > Does anyone have a solution for this issue.

> >

> > I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

> >

> > Thank You

> >

> > Laszlo

> >

Posted

Hello Lazlo,

 

Install Windows Installer 3.1 v2 (3.1.4000.2435) is availªble here:

http://support.microsoft.com/kb/893803

 

 

Locate your file msi.dll (with search if you are not sure where it's

located) and confirm what the version is, either from it's properties or just

passing your cursor over it. If it's not the latest which is 3.1.4000.2435,

then:

http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

- -- --

I hope this post is helpful.

 

Let us know how it works ºut.

- -- --

 

 

 

"Lazlo" wrote:

> I try these steps:

>

> „Peter Foldes†ezt írta:

>

> > Get Dial-a-Fix:

> > http://wiki.djlizard.net/Dial-a-fix

> >

> > Use its options to fix:

> > - Windows Installer

> > - Windows Update

> > - All the Registration Center options.

> >

> > Turn off the "Empty System32\Catroot 2"

> > Do NOT do "Flush SoftwareDistribution".

> >

> > Then click "GO" and wait until it is done... Reboot may be needed.

> >

> > - Download/Install Windows Update v3.

> > http://go.microsoft.com/fwlink/?LinkID=91237

> > (You may need to install it using the command line switch "/wuforce" right

> > after an additional reboot - immediately after logging in.)

> >

> > - Download/Install the 927891 patch.

> > http://www.microsoft.com/downloads/details.aspx?FamilyId=7A81B0CD-A0B9-497E-8A89-404327772E5A

> >

> > - Reboot.

>

> The result is I could use this dial-a-fix, I also could install win install

> 3.0, but I could not install the 927891 patch.

> Here is log from this patch:

>

> 1.485: 2007/09/06 18:46:15.718 (local)

> 1.485: c:\41193da77a1526b71d5a\update\update.exe (version 6.2.29.0)

> 1.485: Hotfix started with following command line:

> 1.657: FileVersion of C:\WINDOWS\system32\msi.dll is Less Than 3.1.0000.0000

> 1.657: Condition Check for Line 1 of PreRequisite returned FALSE

> 1.657: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> 1.657: A(z) KB927891 telepítője a következő hibába ütközött: A telepítés

> nem folytatható, mert hiányzik KB927891 telepítésének legalább egy

> előfeltétele. A hibával kapcsolatos további részleteket a következő

> naplófájlban tekintheti meg: c:\windows\KB927891.log

> 1.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> 1.688: A telepítés nem folytatható, mert hiányzik KB927891 telepítésének

> legalább egy előfeltétele. A hibával kapcsolatos további részleteket a

> következő naplófájlban tekintheti meg: c:\windows\KB927891.log

> 54.110: Message displayed to the user: A telepítés nem folytatható, mert

> hiányzik KB927891 telepítésének legalább egy előfeltétele. A hibával

> kapcsolatos további részleteket a következő naplófájlban tekintheti meg:

> c:\windows\KB927891.log

> 54.110: User Input: OK

> 54.110: Update.exe extended error code = 0xf0f4

> 54.110: Update.exe return code was masked to 0x643 for MSI custom action

> compliance.

>

> „TaurArian†ezt írta:

>

> > On the WU Website, select your history of updates - now click on failed

> > update (red mark) and see if there is an error code.

> > If there is an error code, write it down and post back or in the

> > alternative, do a search for the error code.

> >

> > Also you can view the Update log in Windows:-

> >

> > Click Start, and then click Run.

> > In the Open box, type: %windir%\windowsupdate.log

> > and then click OK.

> >

> > Scroll down towards the bottom for the latest entries to locate the error

> > code(s) associated with the latest failed attempt to download/install. If

> > appropriate copy and paste the error codes into this thread so someone may be

> > able to assist you. On the other hand, you may be able to find the error code

> > and other suggestions by searching the Newsgroup.

> >

> > Also check Windows folder for file called KB******.log (****** = number of

> > update ie KB896688) and post the contents of the failed update.

> > This may provide further clues as to why the update failed.

> >

> > How to read the Windowsupdate.log file:

> > http://support.microsoft.com/?kbid=902093

> >

> > Additional Info:

> >

> > You cannot install some updates or programs

> > http://support.microsoft.com/kb/822798

> >

> > How to troubleshoot Windows Update, Microsoft Update, and Windows Server

> > Update Services installation issues:

> > http://support.microsoft.com/?kbid=906602

> >

> > Windows Update Solution Center

> > http://support.microsoft.com/?scid=phen-us6527

> >

> >

> >

> > "Peter Foldes" wrote:

> >

> > > posted to the windowsupdate via crosspost

> > >

> > > This was posted in the .hu xp group and translation is below

> > >

> > > --

> > > Peter

> > >

> > > Please Reply to Newsgroup for the benefit of others

> > > Requests for assistance by email can not and will not be acknowledged.

> > >

> > > "Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

> > >

> > > Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

> > > Unfortunately it seems to download but when it comes to installing the installation fails.

> > >

> > > I do not get any errors shown except that it say's that "Installation Failed"

> > >

> > > Does anyone have a solution for this issue.

> > >

> > > I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

> > >

> > > Thank You

> > >

> > > Laszlo

> > >

Posted

Hello,

 

With your helping I made it yesterday:

 

With dial a fix I could install win.install 3.0.Then that patch doesn't

worked for me, I couldn't install.it. I think about it, and I try to download

and install the win updates from windows update. The first was the

win.installer 3.1 as usual. Reboot.

Then I tried to continue that, and it worked. I don't know how, But finally

I could download and install all of the updates(including explorer 7)

 

Thank you again (Engel, TaurArian and of course Peter Foldes)

 

 

 

 

„Engel†ezt írta:

> Hello Lazlo,

>

> Install Windows Installer 3.1 v2 (3.1.4000.2435) is availªble here:

> http://support.microsoft.com/kb/893803

>

>

> Locate your file msi.dll (with search if you are not sure where it's

> located) and confirm what the version is, either from it's properties or just

> passing your cursor over it. If it's not the latest which is 3.1.4000.2435,

> then:

> http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

> - -- --

> I hope this post is helpful.

>

> Let us know how it works ºut.

> - -- --

>

>

>

> "Lazlo" wrote:

>

> > I try these steps:

> >

> > „Peter Foldes†ezt írta:

> >

> > > Get Dial-a-Fix:

> > > http://wiki.djlizard.net/Dial-a-fix

> > >

> > > Use its options to fix:

> > > - Windows Installer

> > > - Windows Update

> > > - All the Registration Center options.

> > >

> > > Turn off the "Empty System32\Catroot 2"

> > > Do NOT do "Flush SoftwareDistribution".

> > >

> > > Then click "GO" and wait until it is done... Reboot may be needed.

> > >

> > > - Download/Install Windows Update v3.

> > > http://go.microsoft.com/fwlink/?LinkID=91237

> > > (You may need to install it using the command line switch "/wuforce" right

> > > after an additional reboot - immediately after logging in.)

> > >

> > > - Download/Install the 927891 patch.

> > > http://www.microsoft.com/downloads/details.aspx?FamilyId=7A81B0CD-A0B9-497E-8A89-404327772E5A

> > >

> > > - Reboot.

> >

> > The result is I could use this dial-a-fix, I also could install win install

> > 3.0, but I could not install the 927891 patch.

> > Here is log from this patch:

> >

> > 1.485: 2007/09/06 18:46:15.718 (local)

> > 1.485: c:\41193da77a1526b71d5a\update\update.exe (version 6.2.29.0)

> > 1.485: Hotfix started with following command line:

> > 1.657: FileVersion of C:\WINDOWS\system32\msi.dll is Less Than 3.1.0000.0000

> > 1.657: Condition Check for Line 1 of PreRequisite returned FALSE

> > 1.657: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> > 1.657: A(z) KB927891 telepítője a következő hibába ütközött: A telepítés

> > nem folytatható, mert hiányzik KB927891 telepítésének legalább egy

> > előfeltétele. A hibával kapcsolatos további részleteket a következő

> > naplófájlban tekintheti meg: c:\windows\KB927891.log

> > 1.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> > 1.688: A telepítés nem folytatható, mert hiányzik KB927891 telepítésének

> > legalább egy előfeltétele. A hibával kapcsolatos további részleteket a

> > következő naplófájlban tekintheti meg: c:\windows\KB927891.log

> > 54.110: Message displayed to the user: A telepítés nem folytatható, mert

> > hiányzik KB927891 telepítésének legalább egy előfeltétele. A hibával

> > kapcsolatos további részleteket a következő naplófájlban tekintheti meg:

> > c:\windows\KB927891.log

> > 54.110: User Input: OK

> > 54.110: Update.exe extended error code = 0xf0f4

> > 54.110: Update.exe return code was masked to 0x643 for MSI custom action

> > compliance.

> >

> > „TaurArian†ezt írta:

> >

> > > On the WU Website, select your history of updates - now click on failed

> > > update (red mark) and see if there is an error code.

> > > If there is an error code, write it down and post back or in the

> > > alternative, do a search for the error code.

> > >

> > > Also you can view the Update log in Windows:-

> > >

> > > Click Start, and then click Run.

> > > In the Open box, type: %windir%\windowsupdate.log

> > > and then click OK.

> > >

> > > Scroll down towards the bottom for the latest entries to locate the error

> > > code(s) associated with the latest failed attempt to download/install. If

> > > appropriate copy and paste the error codes into this thread so someone may be

> > > able to assist you. On the other hand, you may be able to find the error code

> > > and other suggestions by searching the Newsgroup.

> > >

> > > Also check Windows folder for file called KB******.log (****** = number of

> > > update ie KB896688) and post the contents of the failed update.

> > > This may provide further clues as to why the update failed.

> > >

> > > How to read the Windowsupdate.log file:

> > > http://support.microsoft.com/?kbid=902093

> > >

> > > Additional Info:

> > >

> > > You cannot install some updates or programs

> > > http://support.microsoft.com/kb/822798

> > >

> > > How to troubleshoot Windows Update, Microsoft Update, and Windows Server

> > > Update Services installation issues:

> > > http://support.microsoft.com/?kbid=906602

> > >

> > > Windows Update Solution Center

> > > http://support.microsoft.com/?scid=phen-us6527

> > >

> > >

> > >

> > > "Peter Foldes" wrote:

> > >

> > > > posted to the windowsupdate via crosspost

> > > >

> > > > This was posted in the .hu xp group and translation is below

> > > >

> > > > --

> > > > Peter

> > > >

> > > > Please Reply to Newsgroup for the benefit of others

> > > > Requests for assistance by email can not and will not be acknowledged.

> > > >

> > > > "Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

> > > >

> > > > Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

> > > > Unfortunately it seems to download but when it comes to installing the installation fails.

> > > >

> > > > I do not get any errors shown except that it say's that "Installation Failed"

> > > >

> > > > Does anyone have a solution for this issue.

> > > >

> > > > I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

> > > >

> > > > Thank You

> > > >

> > > > Laszlo

> > > >

Posted

Hi Lazlo,

 

You're welcome, glad to have been of service and thanks for posting back.

- -- --

 

"Lazlo" wrote:

> Hello,

>

> With your helping I made it yesterday:

>

> With dial a fix I could install win.install 3.0.Then that patch doesn't

> worked for me, I couldn't install.it. I think about it, and I try to download

> and install the win updates from windows update. The first was the

> win.installer 3.1 as usual. Reboot.

> Then I tried to continue that, and it worked. I don't know how, But finally

> I could download and install all of the updates(including explorer 7)

>

> Thank you again (Engel, TaurArian and of course Peter Foldes)

>

>

>

>

> „Engel†ezt írta:

>

> > Hello Lazlo,

> >

> > Install Windows Installer 3.1 v2 (3.1.4000.2435) is availªble here:

> > http://support.microsoft.com/kb/893803

> >

> >

> > Locate your file msi.dll (with search if you are not sure where it's

> > located) and confirm what the version is, either from it's properties or just

> > passing your cursor over it. If it's not the latest which is 3.1.4000.2435,

> > then:

> > http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

> > - -- --

> > I hope this post is helpful.

> >

> > Let us know how it works ºut.

> > - -- --

> >

> >

> >

> > "Lazlo" wrote:

> >

> > > I try these steps:

> > >

> > > „Peter Foldes†ezt írta:

> > >

> > > > Get Dial-a-Fix:

> > > > http://wiki.djlizard.net/Dial-a-fix

> > > >

> > > > Use its options to fix:

> > > > - Windows Installer

> > > > - Windows Update

> > > > - All the Registration Center options.

> > > >

> > > > Turn off the "Empty System32\Catroot 2"

> > > > Do NOT do "Flush SoftwareDistribution".

> > > >

> > > > Then click "GO" and wait until it is done... Reboot may be needed.

> > > >

> > > > - Download/Install Windows Update v3.

> > > > http://go.microsoft.com/fwlink/?LinkID=91237

> > > > (You may need to install it using the command line switch "/wuforce" right

> > > > after an additional reboot - immediately after logging in.)

> > > >

> > > > - Download/Install the 927891 patch.

> > > > http://www.microsoft.com/downloads/details.aspx?FamilyId=7A81B0CD-A0B9-497E-8A89-404327772E5A

> > > >

> > > > - Reboot.

> > >

> > > The result is I could use this dial-a-fix, I also could install win install

> > > 3.0, but I could not install the 927891 patch.

> > > Here is log from this patch:

> > >

> > > 1.485: 2007/09/06 18:46:15.718 (local)

> > > 1.485: c:\41193da77a1526b71d5a\update\update.exe (version 6.2.29.0)

> > > 1.485: Hotfix started with following command line:

> > > 1.657: FileVersion of C:\WINDOWS\system32\msi.dll is Less Than 3.1.0000.0000

> > > 1.657: Condition Check for Line 1 of PreRequisite returned FALSE

> > > 1.657: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> > > 1.657: A(z) KB927891 telepítője a következő hibába ütközött: A telepítés

> > > nem folytatható, mert hiányzik KB927891 telepítésének legalább egy

> > > előfeltétele. A hibával kapcsolatos további részleteket a következő

> > > naplófájlban tekintheti meg: c:\windows\KB927891.log

> > > 1.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102

> > > 1.688: A telepítés nem folytatható, mert hiányzik KB927891 telepítésének

> > > legalább egy előfeltétele. A hibával kapcsolatos további részleteket a

> > > következő naplófájlban tekintheti meg: c:\windows\KB927891.log

> > > 54.110: Message displayed to the user: A telepítés nem folytatható, mert

> > > hiányzik KB927891 telepítésének legalább egy előfeltétele. A hibával

> > > kapcsolatos további részleteket a következő naplófájlban tekintheti meg:

> > > c:\windows\KB927891.log

> > > 54.110: User Input: OK

> > > 54.110: Update.exe extended error code = 0xf0f4

> > > 54.110: Update.exe return code was masked to 0x643 for MSI custom action

> > > compliance.

> > >

> > > „TaurArian†ezt írta:

> > >

> > > > On the WU Website, select your history of updates - now click on failed

> > > > update (red mark) and see if there is an error code.

> > > > If there is an error code, write it down and post back or in the

> > > > alternative, do a search for the error code.

> > > >

> > > > Also you can view the Update log in Windows:-

> > > >

> > > > Click Start, and then click Run.

> > > > In the Open box, type: %windir%\windowsupdate.log

> > > > and then click OK.

> > > >

> > > > Scroll down towards the bottom for the latest entries to locate the error

> > > > code(s) associated with the latest failed attempt to download/install. If

> > > > appropriate copy and paste the error codes into this thread so someone may be

> > > > able to assist you. On the other hand, you may be able to find the error code

> > > > and other suggestions by searching the Newsgroup.

> > > >

> > > > Also check Windows folder for file called KB******.log (****** = number of

> > > > update ie KB896688) and post the contents of the failed update.

> > > > This may provide further clues as to why the update failed.

> > > >

> > > > How to read the Windowsupdate.log file:

> > > > http://support.microsoft.com/?kbid=902093

> > > >

> > > > Additional Info:

> > > >

> > > > You cannot install some updates or programs

> > > > http://support.microsoft.com/kb/822798

> > > >

> > > > How to troubleshoot Windows Update, Microsoft Update, and Windows Server

> > > > Update Services installation issues:

> > > > http://support.microsoft.com/?kbid=906602

> > > >

> > > > Windows Update Solution Center

> > > > http://support.microsoft.com/?scid=phen-us6527

> > > >

> > > >

> > > >

> > > > "Peter Foldes" wrote:

> > > >

> > > > > posted to the windowsupdate via crosspost

> > > > >

> > > > > This was posted in the .hu xp group and translation is below

> > > > >

> > > > > --

> > > > > Peter

> > > > >

> > > > > Please Reply to Newsgroup for the benefit of others

> > > > > Requests for assistance by email can not and will not be acknowledged.

> > > > >

> > > > > "Lazlo" <Lazlo@discussions.microsoft.com> wrote in message news:17203BFE-2A70-42D7-9025-0812277410DE@microsoft.com...

> > > > >

> > > > > Running Windows XP Pro with Office 2003. When I go to Update(Windows Update) it shows me there is 82 Updates to be updated and installed.

> > > > > Unfortunately it seems to download but when it comes to installing the installation fails.

> > > > >

> > > > > I do not get any errors shown except that it say's that "Installation Failed"

> > > > >

> > > > > Does anyone have a solution for this issue.

> > > > >

> > > > > I have tried a solution that was posted by MowGreen MVP and followed it step by step but unfortunately it did not work for me on this box.

> > > > >

> > > > > Thank You

> > > > >

> > > > > Laszlo

> > > > >

×
×
  • Create New...