P
PA Bear [MS MVP]
[Begin crosspost to Win98 General newsgroup]
Thread history:
http://groups.google.com/group/micr..._frm/thread/d5c99b0ae721f42f/455c688cdb10b216
~~~~~~~~~~~~~~~~~~~~~~~~~
The 0x801901F4 error(s) means that the update(s) failed to download AND
install.
IIRC only older versions of Zone Alarm firewall will work properly in Win98,
Jim. If you're NOT running Zone Alarm v6.1.744.1, uninstall it now. [If
you're connecting to the DSL modem via a router, the router alone should
provide adequate protection for the Win98 box. Others here are sure to
disagree with me but so be it.]
Moving on...
[You will want to print or copy/paste the following instructions into
Notepad for offline reference.]
1. AFAIK, no currently supported version of SpySweeper's supported in Win98.
Assuming you've not purchased SpySweeper (or if you don't get if "free" from
your ISP or MSN), please (a) disable all SpySweeper Guards (protections)
then (b) uninstall it.
2. Very briefly & temporarily, disable ZA firewall (if still installed)
*and* all SpySweeper Guards (if still installed) *and* Avast *and*
physically disconnect the machine from the internet. Don't reconnect until
Step #4 below!
3a. Now overinstall IE6 SP1 per my previous reply to this thread:
http://groups.google.com/group/microsoft.public.win98.internet.windows_update/msg/c2441e1a72a2d39b
3b. After rebooting, repeat Step #2 above!!
4. Now reconnect to the internet and go to Windows Update and try again.
Follow all prompts.
NB: Don't do ANYTHING else online until Avast has been re-enabled and (if
you don't connect via a router) until ZA (v6.1.744.1 or earlier) has been
re-enabled!!
--
~PA Bear
Jim wrote:
> Does that error mean that the update did not successfully DL? OR does it
> mean that this machines log of a successful DL is in error\corrupted? The
> View Installation History states a successful DL and the Add\Remove
> software
> in Control Panel shows a successful DL to this machine. AND
>
> Windows Update.log : c:\WUTemp\com_microsoft.Q823559_98\823559USA8.EXE
> 2008-10-01 12:39:58 16:39:58 Error IUENGINE Library download
> error. Will retry. (Error 0x801901F4)
>
> No, I did not do an overinstall of IEv.6 SP1 as of this time. Since I did
> a
> cleanboot install of IEv.6 over v.5 I do not see this a problem. Could
> this
> be a result of a previous update blocking some logging of q823559? This
> file: %windir%\kb823559.log is not found. ref.
> http://support.microsoft.com/kb/910339
> AV-Avast AS-SpySweeper FW-ZA
> DSL
>
> "PA Bear [MS MVP]" wrote:
>
>> 0x801901F4 BG_E_HTTP_ERROR_500
>> The server encountered an unexpected condition that prevented it from
>> fulfilling the request.
>>
>> Yes, both errors point to the same problem.
>>
>> Have you tried overinstalling IE6 SP1 as I suggested in an earlier reply
>> to
>> this thread?
>>
>> What anti-virus application or security suite is installed? What
>> anti-spyware applications (other than Defender)? What third-party
>> firewall
>> (if any)?
>>
>> How is the machine connecting to the internet (i.e., dial-up DSL cable
>> satellite)? Is a router involved? Is an internet (or web) accelerator
>> installed (typically included with low-priced dial-up ISPs)?
>>
>> Jim wrote:
>>> I just tried again the update and this is the log of it with 1 error in
>>> the log
>>>
>>> from
>>> https://v4.windowsupdate.microsoft.com/consumerdrivers/getmanifest.asp
>>> 2008-10-01 12:39:50 16:39:50 Success IUENGINE Querying
>>> software
>>> update catalog from
> https://v4.windowsupdate.microsoft.com/getmanifest.asp
>>> 2008-10-01 12:39:51 16:39:51 Success IUENGINE Asynchronous
>>> Download started
>>> 2008-10-01 12:39:51 16:39:51 Success IUENGINE Download
>>> destination root folder is: c:\WUTemp
>>> 2008-10-01 12:39:58 16:39:58 Success IUENGINE Downloaded file
>>>
> http://download.windowsupdate.com/m...23559USA8_0e714506b380e4be11ff07b31da9da9.EXE
>>> 2008-10-01 12:39:58 16:39:58 Success IUENGINE Local path
>>> c:\WUTemp\com_microsoft.Q823559_98\823559USA8.EXE
>>> 2008-10-01 12:39:58 16:39:58 Error IUENGINE Library
>>> download
>>> error. Will retry. (Error 0x801901F4)
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE See iuhist.xml
>>> for
>>> details: Download finished
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Asynchronous
>>> Install started
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Asynchronous
>>> Install completed startup
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Installing
>>> SOFTWARE
>>> item from publisher com_microsoft
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Installer
>>> Command
>>> Type: EXE
>>> 2008-10-01 12:40:01 16:40:01 Success IUENGINE See iuhist.xml
>>> for
>>> details: Install finished
>>>
>>> This is the same error that is triggering the Windows Critical Update to
>>> prompt...?
Thread history:
http://groups.google.com/group/micr..._frm/thread/d5c99b0ae721f42f/455c688cdb10b216
~~~~~~~~~~~~~~~~~~~~~~~~~
The 0x801901F4 error(s) means that the update(s) failed to download AND
install.
IIRC only older versions of Zone Alarm firewall will work properly in Win98,
Jim. If you're NOT running Zone Alarm v6.1.744.1, uninstall it now. [If
you're connecting to the DSL modem via a router, the router alone should
provide adequate protection for the Win98 box. Others here are sure to
disagree with me but so be it.]
Moving on...
[You will want to print or copy/paste the following instructions into
Notepad for offline reference.]
1. AFAIK, no currently supported version of SpySweeper's supported in Win98.
Assuming you've not purchased SpySweeper (or if you don't get if "free" from
your ISP or MSN), please (a) disable all SpySweeper Guards (protections)
then (b) uninstall it.
2. Very briefly & temporarily, disable ZA firewall (if still installed)
*and* all SpySweeper Guards (if still installed) *and* Avast *and*
physically disconnect the machine from the internet. Don't reconnect until
Step #4 below!
3a. Now overinstall IE6 SP1 per my previous reply to this thread:
http://groups.google.com/group/microsoft.public.win98.internet.windows_update/msg/c2441e1a72a2d39b
3b. After rebooting, repeat Step #2 above!!
4. Now reconnect to the internet and go to Windows Update and try again.
Follow all prompts.
NB: Don't do ANYTHING else online until Avast has been re-enabled and (if
you don't connect via a router) until ZA (v6.1.744.1 or earlier) has been
re-enabled!!
--
~PA Bear
Jim wrote:
> Does that error mean that the update did not successfully DL? OR does it
> mean that this machines log of a successful DL is in error\corrupted? The
> View Installation History states a successful DL and the Add\Remove
> software
> in Control Panel shows a successful DL to this machine. AND
>
> Windows Update.log : c:\WUTemp\com_microsoft.Q823559_98\823559USA8.EXE
> 2008-10-01 12:39:58 16:39:58 Error IUENGINE Library download
> error. Will retry. (Error 0x801901F4)
>
> No, I did not do an overinstall of IEv.6 SP1 as of this time. Since I did
> a
> cleanboot install of IEv.6 over v.5 I do not see this a problem. Could
> this
> be a result of a previous update blocking some logging of q823559? This
> file: %windir%\kb823559.log is not found. ref.
> http://support.microsoft.com/kb/910339
> AV-Avast AS-SpySweeper FW-ZA
> DSL
>
> "PA Bear [MS MVP]" wrote:
>
>> 0x801901F4 BG_E_HTTP_ERROR_500
>> The server encountered an unexpected condition that prevented it from
>> fulfilling the request.
>>
>> Yes, both errors point to the same problem.
>>
>> Have you tried overinstalling IE6 SP1 as I suggested in an earlier reply
>> to
>> this thread?
>>
>> What anti-virus application or security suite is installed? What
>> anti-spyware applications (other than Defender)? What third-party
>> firewall
>> (if any)?
>>
>> How is the machine connecting to the internet (i.e., dial-up DSL cable
>> satellite)? Is a router involved? Is an internet (or web) accelerator
>> installed (typically included with low-priced dial-up ISPs)?
>>
>> Jim wrote:
>>> I just tried again the update and this is the log of it with 1 error in
>>> the log
>>>
>>> from
>>> https://v4.windowsupdate.microsoft.com/consumerdrivers/getmanifest.asp
>>> 2008-10-01 12:39:50 16:39:50 Success IUENGINE Querying
>>> software
>>> update catalog from
> https://v4.windowsupdate.microsoft.com/getmanifest.asp
>>> 2008-10-01 12:39:51 16:39:51 Success IUENGINE Asynchronous
>>> Download started
>>> 2008-10-01 12:39:51 16:39:51 Success IUENGINE Download
>>> destination root folder is: c:\WUTemp
>>> 2008-10-01 12:39:58 16:39:58 Success IUENGINE Downloaded file
>>>
> http://download.windowsupdate.com/m...23559USA8_0e714506b380e4be11ff07b31da9da9.EXE
>>> 2008-10-01 12:39:58 16:39:58 Success IUENGINE Local path
>>> c:\WUTemp\com_microsoft.Q823559_98\823559USA8.EXE
>>> 2008-10-01 12:39:58 16:39:58 Error IUENGINE Library
>>> download
>>> error. Will retry. (Error 0x801901F4)
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE See iuhist.xml
>>> for
>>> details: Download finished
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Asynchronous
>>> Install started
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Asynchronous
>>> Install completed startup
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Installing
>>> SOFTWARE
>>> item from publisher com_microsoft
>>> 2008-10-01 12:39:59 16:39:59 Success IUENGINE Installer
>>> Command
>>> Type: EXE
>>> 2008-10-01 12:40:01 16:40:01 Success IUENGINE See iuhist.xml
>>> for
>>> details: Install finished
>>>
>>> This is the same error that is triggering the Windows Critical Update to
>>> prompt...?