Sudden Abnormal mouse erratic behaviour

[Mike M]

Laser mice have neither balls nor rollers.
--
Mike Maltby
mike.maltby@gmail.com


Greegor <Greegor47@gmail.com> wrote:

> Do you have a "WinModem" or "SoftModem"?
> Have you removed one without removing the DRIVERS?
> Read up on what's wrong with them and their drivers.
>
> Do you have other drivers loading your system down?
> Driver loading can make a computer act like it has
> the computer equivalent of ADHD in people.
>
> Look up how to clean mouse balls.
> (I find cleaning the rollers more of an issue.)
> There are many explanations of this online.
> Several refer to the half serious half humorous
> IBM document from early 1980's on
> How to Clean Mouse Balls.

 

[Eric]

I don't see anything in this thread about the problem mouse having lasers.
Laser mice do in fact have balls and rollers, on that wheel thing between
the buttons, but that's quite a bit harder to clean.
Whenever my laser mouse acts erratically, I just pick it up and put it back
down and it fixes itself.
Otherwise I'd suggest making sure it's clean and on a proper surface, then
reinstalling drivers, and getting a new mouse if it still doesn't work
right.

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:%23DnHCb2zHHA.5052@TK2MSFTNGP04.phx.gbl...
> Laser mice have neither balls nor rollers.
> --
> Mike Maltby
> mike.maltby@gmail.com
>
>
> Greegor <Greegor47@gmail.com> wrote:
>
>> Do you have a "WinModem" or "SoftModem"?
>> Have you removed one without removing the DRIVERS?
>> Read up on what's wrong with them and their drivers.
>>
>> Do you have other drivers loading your system down?
>> Driver loading can make a computer act like it has
>> the computer equivalent of ADHD in people.
>>
>> Look up how to clean mouse balls.
>> (I find cleaning the rollers more of an issue.)
>> There are many explanations of this online.
>> Several refer to the half serious half humorous
>> IBM document from early 1980's on
>> How to Clean Mouse Balls.
>

 

[Mike M]

You could try:
Eyes, Open, Read.

If you were to do so you would clearly see the post was made in response
to Joan's where she said she had the same mouse as myself - "A Microsoft
Wheel Mouse OPTICAL". OK, not laser but rather LED but regardless it has
neither ball nor rollers.

Once again you have jumped into a thread and not read what has been posted
in previous messages.
--
Mike Maltby
mike.maltby@gmail.com


Eric <someone@microsoft.com> wrote:

> I don't see anything in this thread about the problem mouse having
> lasers. Laser mice do in fact have balls and rollers, on that wheel
> thing between the buttons, but that's quite a bit harder to clean.
> Whenever my laser mouse acts erratically, I just pick it up and put
> it back down and it fixes itself.
> Otherwise I'd suggest making sure it's clean and on a proper surface,
> then reinstalling drivers, and getting a new mouse if it still
> doesn't work right.

 

[Eric]

Don't blame me because you're an idiot. Your post did not quote anything referencing a laser mouse, and the original post in the thread did not mention a laser mouse. Your mouse does in fact have a thing in it which rolls and could need cleaning, though it's not so easy to clean, unless you have a stupid mouse with no SCROLL WHEEL. Most mice, even laser mice, have wheels which can gunk up and act screwy.
If Greegor was trying to help the OP, he misquoted. If he was trying to help YOU, the one with the problem in what he did quote, he might have been a little confused.
"I'm currently also struggling with a wayward mouse (Microsoft Wheel Mouse Optical) where the problem is that the wheel"
A wheel is a bit like a ball, though harder to fix. Your response, which did not quote anything referencing a laser mouse, was just plain ignorant in insulting Greegor without answering his question about drivers. Then you respond to me with an even more ignorant post. If you're just going to attack people, don't post, or at the very least include a quote that shows why you think someone needs to be corrected. Don't expect people to re-read every post up through the middle of the thread to find out why you bothered to respond with one line which is not intended to be helpful.

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message news:%23b1kRU4zHHA.1184@TK2MSFTNGP04.phx.gbl...
> You could try:
> Eyes, Open, Read.
>
> If you were to do so you would clearly see the post was made in response
> to Joan's where she said she had the same mouse as myself - "A Microsoft
> Wheel Mouse OPTICAL". OK, not laser but rather LED but regardless it has
> neither ball nor rollers.
>
> Once again you have jumped into a thread and not read what has been posted
> in previous messages.
> --
> Mike Maltby
> mike.maltby@gmail.com
>
>
> Eric <someone@microsoft.com> wrote:
>
>> I don't see anything in this thread about the problem mouse having
>> lasers. Laser mice do in fact have balls and rollers, on that wheel
>> thing between the buttons, but that's quite a bit harder to clean.
>> Whenever my laser mouse acts erratically, I just pick it up and put
>> it back down and it fixes itself.
>> Otherwise I'd suggest making sure it's clean and on a proper surface,
>> then reinstalling drivers, and getting a new mouse if it still
>> doesn't work right.
>

 

[Joan Archer]

Mike is certainly not the idiot here as he was just answering me who was
the one who sent the thread OT by blaming the cat, then you come in
insisting he was insulting Greegor when he did nothing of the kind. If you
want to post try reading the whole conversation then you might know what
is happening and not act like a blonker who it seems just comes here to
cause trouble.
Mike has helped a lot more people with their computer problems than you
ever will and doesn't have to insult anyone to do it or make himself sound
like a smart arse either.
Joan


Eric wrote:
> Don't blame me because you're an idiot. Your post did not quote
> anything referencing a laser mouse, and the original post in the
> thread did not mention a laser mouse. Your mouse does in fact have a
> thing in it which rolls and could need cleaning, though it's not so
> easy to clean, unless you have a stupid mouse with no SCROLL WHEEL.
> Most mice, even laser mice, have wheels which can gunk up and act
> screwy.
> If Greegor was trying to help the OP, he misquoted. If he was trying
> to help YOU, the one with the problem in what he did quote, he might
> have been a little confused.
> "I'm currently also struggling with a wayward mouse (Microsoft Wheel
> Mouse Optical) where the problem is that the wheel"
> A wheel is a bit like a ball, though harder to fix. Your response,
> which did not quote anything referencing a laser mouse, was just
> plain ignorant in insulting Greegor without answering his question
> about drivers. Then you respond to me with an even more ignorant
> post. If you're just going to attack people, don't post, or at the
> very least include a quote that shows why you think someone needs to
> be corrected. Don't expect people to re-read every post up through
> the middle of the thread to find out why you bothered to respond with
> one line which is not intended to be helpful.
>
> "Mike M" <No_Spam@Corned_Beef.Only> wrote in message
> news:%23b1kRU4zHHA.1184@TK2MSFTNGP04.phx.gbl...
>> You could try:
>> Eyes, Open, Read.
>>
>> If you were to do so you would clearly see the post was made in
>> response to Joan's where she said she had the same mouse as myself -
>> "A Microsoft Wheel Mouse OPTICAL". OK, not laser but rather LED but
>> regardless it has neither ball nor rollers.
>>
>> Once again you have jumped into a thread and not read what has been
>> posted in previous messages.
>> --
>> Mike Maltby
>> mike.maltby@gmail.com
>>
>>
>> Eric <someone@microsoft.com> wrote:
>>
>>> I don't see anything in this thread about the problem mouse having
>>> lasers. Laser mice do in fact have balls and rollers, on that wheel
>>> thing between the buttons, but that's quite a bit harder to clean.
>>> Whenever my laser mouse acts erratically, I just pick it up and put
>>> it back down and it fixes itself.
>>> Otherwise I'd suggest making sure it's clean and on a proper
>>> surface, then reinstalling drivers, and getting a new mouse if it
>>> still doesn't work right.

 

[Heather]

WOW!! Goodonya Joanie. The guy is a total luser!! He perhaps lacks
the very equipment he is trying to advise on.......bwa ha ha!!

Figgs (and he is nothing but a troublemaker)

"Joan Archer" <archer_joan@NOSPAM.com> wrote in message
news:OoufEX8zHHA.1208@TK2MSFTNGP05.phx.gbl...
> Mike is certainly not the idiot here as he was just answering me who
> was the one who sent the thread OT by blaming the cat, then you come
> in insisting he was insulting Greegor when he did nothing of the kind.
> If you want to post try reading the whole conversation then you might
> know what is happening and not act like a blonker who it seems just
> comes here to cause trouble.
> Mike has helped a lot more people with their computer problems than
> you ever will and doesn't have to insult anyone to do it or make
> himself sound like a smart arse either.
> Joan
>
>
> Eric wrote:
>> Don't blame me because you're an idiot. Your post did not quote
>> anything referencing a laser mouse, and the original post in the
>> thread did not mention a laser mouse. Your mouse does in fact have a
>> thing in it which rolls and could need cleaning, though it's not so
>> easy to clean, unless you have a stupid mouse with no SCROLL WHEEL.
>> Most mice, even laser mice, have wheels which can gunk up and act
>> screwy.
>> If Greegor was trying to help the OP, he misquoted. If he was trying
>> to help YOU, the one with the problem in what he did quote, he might
>> have been a little confused.
>> "I'm currently also struggling with a wayward mouse (Microsoft Wheel
>> Mouse Optical) where the problem is that the wheel"
>> A wheel is a bit like a ball, though harder to fix. Your response,
>> which did not quote anything referencing a laser mouse, was just
>> plain ignorant in insulting Greegor without answering his question
>> about drivers. Then you respond to me with an even more ignorant
>> post. If you're just going to attack people, don't post, or at the
>> very least include a quote that shows why you think someone needs to
>> be corrected. Don't expect people to re-read every post up through
>> the middle of the thread to find out why you bothered to respond with
>> one line which is not intended to be helpful.
>>
>> "Mike M" <No_Spam@Corned_Beef.Only> wrote in message
>> news:%23b1kRU4zHHA.1184@TK2MSFTNGP04.phx.gbl...
>>> You could try:
>>> Eyes, Open, Read.
>>>
>>> If you were to do so you would clearly see the post was made in
>>> response to Joan's where she said she had the same mouse as myself -
>>> "A Microsoft Wheel Mouse OPTICAL". OK, not laser but rather LED but
>>> regardless it has neither ball nor rollers.
>>>
>>> Once again you have jumped into a thread and not read what has been
>>> posted in previous messages.
>>> --
>>> Mike Maltby
>>> mike.maltby@gmail.com
>>>
>>>
>>> Eric <someone@microsoft.com> wrote:
>>>
>>>> I don't see anything in this thread about the problem mouse having
>>>> lasers. Laser mice do in fact have balls and rollers, on that wheel
>>>> thing between the buttons, but that's quite a bit harder to clean.
>>>> Whenever my laser mouse acts erratically, I just pick it up and put
>>>> it back down and it fixes itself.
>>>> Otherwise I'd suggest making sure it's clean and on a proper
>>>> surface, then reinstalling drivers, and getting a new mouse if it
>>>> still doesn't work right.
>
>

 

[Mike M]

You really must learn to read a thread before exposing your complete and
total ignorance. I can honestly state that in the seven years that this
newsgroup has been in existence I've never come across such an ignorant
and clueless fool as yourself. If nothing else the sooner you get your
eyes tested the better for us all after which I would suggest a few
lessons in comprehension after which I would suggest a visit to your
friendly psychiatrist as you are clearly in need of his/her help.

Before you start calling others idiots you need to show that you aren't
one yourself and unlike you I at least have a record of helping those
posting to this newsgroup with problems, something you have shown yourself
to date incapable of doing.
--
Mike Maltby
mike.maltby@gmail.com


Eric <someone@microsoft.com> wrote:

> Don't blame me because you're an idiot. Your post did not quote
> anything referencing a laser mouse, and the original post in the
> thread did not mention a laser mouse. Your mouse does in fact have a
> thing in it which rolls and could need cleaning, though it's not so
> easy to clean, unless you have a stupid mouse with no SCROLL WHEEL.
> Most mice, even laser mice, have wheels which can gunk up and act
> screwy.
> If Greegor was trying to help the OP, he misquoted. If he was trying
> to help YOU, the one with the problem in what he did quote, he might
> have been a little confused.
> "I'm currently also struggling with a wayward mouse (Microsoft Wheel
> Mouse Optical) where the problem is that the wheel"
> A wheel is a bit like a ball, though harder to fix. Your response,
> which did not quote anything referencing a laser mouse, was just
> plain ignorant in insulting Greegor without answering his question
> about drivers. Then you respond to me with an even more ignorant
> post. If you're just going to attack people, don't post, or at the
> very least include a quote that shows why you think someone needs to
> be corrected. Don't expect people to re-read every post up through
> the middle of the thread to find out why you bothered to respond with
> one line which is not intended to be helpful.

 

[Eric]

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:%23q9OUI9zHHA.4916@TK2MSFTNGP03.phx.gbl...
> You really must learn to read a thread before exposing your complete and
> total ignorance. I can honestly state that in the seven years that this
> newsgroup has been in existence I've never come across such an ignorant
> and clueless fool as yourself. If nothing else the sooner you get your
> eyes tested the better for us all after which I would suggest a few
> lessons in comprehension after which I would suggest a visit to your
> friendly psychiatrist as you are clearly in need of his/her help.
>
> Before you start calling others idiots you need to show that you aren't
> one yourself and unlike you I at least have a record of helping those
> posting to this newsgroup with problems, something you have shown yourself
> to date incapable of doing.
> --
> Mike Maltby
> mike.maltby@gmail.com
>
You made no attempt to help in this thread. Your personal attacks are
getting more ridiculous. Shut down your computer and walk it to the nearest
dumpster and never go near one again.

 

[Mike M]

Eric,

Your post makes no sense but that comes as no surprise given the general
lack of intelligence and knowledge you normally display when posting to
this newsgroup. I made a comment to Mart about having a problem with my
mouse, Joan commented and then you went off on a limb and started making
your typically inane comments.

If you've got anything constructive to offer that would help the original
poster, and that would indeed be a first, why not post it in response to
the original poster. I'm sure they would be most grateful for your
contribution.
--
Mike Maltby
mike.maltby@gmail.com


Eric <someone@microsoft.com> wrote:

> "Mike M" <No_Spam@Corned_Beef.Only> wrote in message

> You made no attempt to help in this thread. Your personal attacks are
> getting more ridiculous. Shut down your computer and walk it to the
> nearest dumpster and never go near one again.

 

[cquirke (MVP Windows shell/user)]

On Thu, 26 Jul 2007 10:24:19 +0100, "Mike M"

>Laser mice have neither balls nor rollers.

Nor lasers, AFAIK... they use LEDs, and sometimes these don't seem to
"range" well enough, so perhaps a true laser would be better?

If you ever had an optical mouse that is so "fussy" it has to run on a
sheet of plain white paper, you will know what I mean.

This is different to the "patterns on mouse pads distract optical
sensing" issue, in that these "fussy" mice are failing on surfaces
that are not patterned, just insufficiently reflective. Killers are
the top of a black PC case and glass-topped tables, but some will not
work on unscratched white formica.

Mind you, there's still a need to clean optical mice, because gunk can
build up under the hard sliding surface studs underneath the mouse.
When this happens, an attempt to move 1 pixel becomes a sticky jerk
between 0 pixels and 30 pixels.

It's not an onerous business, cleaning the undersurface to fix this,
but some smart-ass (prolly the same sort who wax lyrical about LEDs
not being lasers) may wave this at you when you deliver a new optical
mouse with the promise that it "never needs cleaning" -)



>------------ ----- ---- --- -- - - - -
The most accurate diagnostic instrument
in medicine is the Retrospectoscope
>------------ ----- ---- --- -- - - - -

 

[cquirke (MVP Windows shell/user)]

On Sun, 22 Jul 2007 07:00:46 GMT, "newbie2000" <u36034@uwe> wrote:

>My computer, running WinXP Pro with 128 MB RAM

You're sure to hear "too little RAM", "XP needs 512M" (false), etc.

128M RAM will run XP OK, but it will be slow due to all the swapping.
Not all applications written for XP will work in 128M RAM.

So yes more RAM would be better. I'd either add 256M (SDRAM) or 512M
(DDR/DDR2) or I'd replace your 128M with one of those and then add
your old 128M to another 128M or 256M RAM XP PC if you have one,
assuming it uses the same type of RAM.

But there are other things you can do...
- defrag, then set pagefile size to 512M (it's too low right now)
- if integrated graphics CMOS Setup, allocate less RAM to this
- kill memory-wasters such as Fast User Switching

>Although normally it has to be double-clicked to open a file or
>folder, now it sometimes opens files/folders/e-mail with only one mouse
>click, not two. However, it is very inconsistent, sometimes requiring two
>clicks as normal, but sometimes requiring only one click.

I'd suspect a duff switch within the mouse that is double-triggering.

Some contexts are always one-click, e.g. toolbars such as Quick Launch

>Another symptom is that when a window is open, while browing the web, the
>scroll bar on the right is very herky-jerky, but sometimes not - again being
>inconsistent.

That may be performance-related see stuff about low RAM above.

>Another symptom is that it when I try to capture text by holding down the
>mouse right-click button, it sometimes captures the text, but sometimes
>refuses to, or will capture only a a small part of the text. This occurs on
>web pages, but is even worse trying to capture text in this message I'm
>typing right now.

O...K...

>Also, when I click and hold on the to blue line of a window, such as this
>message I'm now typing, in order to move the non-maximized window, often
>instead of moving the window it'll open it completely.

By "blue line", do you mean the title bar? If so, this smells like
mouse double-triggering again.

>Also, when the cursor is placed at the edge of a non-maximized window to re-
>size it, it often will not re-size it. If I try repeatedly, sooner or later
>it will.

>I use latest AVG AntiVirus and update it at least daily, and did an entire
>system/computer scan, but am virus-free.

An on-demand scan of "the whole system" done within that ?infected
system is not what I would call an exclusionary test.

Google( Bart PE )

>I ran spy bot search and destroy, anti adware, pest control tools, anti
>spyware, anti rootkits, and also tried changing various mouse options but the
>problem is still happening.

Try a different mouse?



>-------------------- ----- ---- --- -- - - - -
Running Windows-based av to kill active malware is like striking
a match to see if what you are standing in is water or petrol.
>-------------------- ----- ---- --- -- - - - -

 

[Rosa Button]

You can get a small mouse for your laptop with plenty of lead at Walmart for
just $15.00
--
Thanks and Have a GREAT day!


"Ogg" wrote:

> "Mart" <mart(NoSpam)@nospam.nospam> wrote..
> > I've gradually been 'downsizing' my rodents, pensioning-off the older,
> > larger ones for smaller 'laptop' models. You don't realize how quickly you
> > can get used to the mini-mice until you have to revert back to an old
> > conventional one for some reason. Then, they're like pushing a brick
> > around your work top.
>
> I concur! I thought I was the only one who had an appeal for the little
> mice for regular use. The key is to find mini-models that don't skimp on the
> lead length.
>
>
>
>

 

[Mike M]

Rosa Button <RosaButton@discussions.microsoft.com> wrote:

> You can get a small mouse for your laptop with plenty of lead at
> Walmart for just $15.00

Add to that US$1,000+ in travel expenses. Most of those who posted to
this thread do not live in n.America.
--
Mike M

 

[Greegor]

On Oct 13, 4:38 am, "Mike M" <No_Spam@Corned_Beef.Only> wrote:
> Rosa Button <RosaBut...@discussions.microsoft.com> wrote:
> > You can get a small mouse for your laptop with plenty of lead at
> > Walmart for just $15.00
>
> Add to that US$1,000+ in travel expenses. Most of those who posted to
> this thread do not live in n.America.
> --
> Mike M

Hasn't WalMart penetrated Europe and China already?

 

[Mike M]

Greegor <Greegor47@gmail.com> wrote:

> Hasn't WalMart penetrated Europe and China already?

In the UK Walmart took over ASDA in, I think, 1999 however they still
trade as ASDA. Regardless few in their right minds would go shopping in
ADSA for a mouse.
--
Mike M

 

[Heather]

"Greegor" <Greegor47@gmail.com> wrote in message
news:1192303623.936771.18750@z24g2000prh.googlegroups.com...
> On Oct 13, 4:38 am, "Mike M" <No_Spam@Corned_Beef.Only> wrote:
>> Rosa Button <RosaBut...@discussions.microsoft.com> wrote:
>> > You can get a small mouse for your laptop with plenty of lead at
>> > Walmart for just $15.00
>>
>> Add to that US$1,000+ in travel expenses. Most of those who posted
>> to
>> this thread do not live in n.America.
>> --
>> Mike M
>
> Hasn't WalMart penetrated Europe and China already?

Who knows?? But it certainly has pushed its way into Canada. I detest
that store!!

 

[Joan Archer]

<g> The ones round here are food supermarkets mainly anyway <g>
Joan



Mike M wrote:
>
> In the UK Walmart took over ASDA in, I think, 1999 however they still
> trade as ASDA. Regardless few in their right minds would go shopping
> in ADSA for a mouse.

 

[webster72n]

"Heather" <figgyd@nospam.invalid> wrote in message
news:uhwNwJdDIHA.5228@TK2MSFTNGP05.phx.gbl...
>
> "Greegor" <Greegor47@gmail.com> wrote in message
> news:1192303623.936771.18750@z24g2000prh.googlegroups.com...
> > On Oct 13, 4:38 am, "Mike M" <No_Spam@Corned_Beef.Only> wrote:
> >> Rosa Button <RosaBut...@discussions.microsoft.com> wrote:
> >> > You can get a small mouse for your laptop with plenty of lead at
> >> > Walmart for just $15.00
> >>
> >> Add to that US$1,000+ in travel expenses. Most of those who posted
> >> to
> >> this thread do not live in n.America.
> >> --
> >> Mike M
> >
> > Hasn't WalMart penetrated Europe and China already?
>
> Who knows?? But it certainly has pushed its way into Canada. I detest
> that store!!

The founder of WalMart is one of Mr. Bush's buddies (from Texas) and He and
the family are worth billions now, thanks to buying for pennies from China
and selling for dollars in the US. The parking lots of their stores around
here, including Sam's Club, are filled most of the time, especially on
weekends. People don't seem to care where it comes from, as long as they
save money themselves. A good portion of them are spanish speaking also.
How can you change a trend??? <H>.

>
>

 

[Heather]

"webster72n" <webster72n@gmail.com> wrote in message
news:%23ctA6edDIHA.4712@TK2MSFTNGP04.phx.gbl...
>
>
> The founder of WalMart is one of Mr. Bush's buddies (from Texas) and
> He and
> the family are worth billions now, thanks to buying for pennies from
> China
> and selling for dollars in the US. The parking lots of their stores
> around
> here, including Sam's Club, are filled most of the time, especially on
> weekends. People don't seem to care where it comes from, as long as
> they
> save money themselves. A good portion of them are spanish speaking
> also. How can you change a trend???
> <H>.
>
Simple.....we avoid shopping in WalMart. They (and those Krispy Kreme
donut stores) are not doing so well up here. We do NOT like spending
our money in blatantly American stores.

You refer to *spanish-speaking*......I will be more blunt and tell you
that the majority that shop in WalMart up here are from the West Indies
and India.

Btw......your Hispanic Witchhunt in the US is totally disgusting!! I no
longer watch any news on American stations for that very reason.

Sra. Heather

 

[webster72n]

"Heather" <figgyd@nospam.invalid> wrote in message
news:u67ACSeDIHA.1188@TK2MSFTNGP04.phx.gbl...
>
> "webster72n" <webster72n@gmail.com> wrote in message
> news:%23ctA6edDIHA.4712@TK2MSFTNGP04.phx.gbl...
> >
> >
> > The founder of WalMart is one of Mr. Bush's buddies (from Texas) and
> > He and
> > the family are worth billions now, thanks to buying for pennies from
> > China
> > and selling for dollars in the US. The parking lots of their stores
> > around
> > here, including Sam's Club, are filled most of the time, especially on
> > weekends. People don't seem to care where it comes from, as long as
> > they
> > save money themselves. A good portion of them are spanish speaking
> > also. How can you change a trend???
> > <H>.
> >
> Simple.....we avoid shopping in WalMart.

Can't help wondering who the 'we's are?
I was referring to the 'majority' of the people in general. There is no way
for them to be guided by 'your' principles, instead of their 'pocket book'
or 'wallet', if you will.
That 'wich hunt' you are referring to, is totally unbeknown to me, to the
contrary, they find more support here than other nationalities.
Soon we'll all be 'friends' anyway, just give it some time.

Harry.

> They (and those Krispy Kreme
> donut stores) are not doing so well up here. We do NOT like spending
> our money in blatantly American stores.
>
> You refer to *spanish-speaking*......I will be more blunt and tell you
> that the majority that shop in WalMart up here are from the West Indies
> and India.
>
> Btw......your Hispanic Witchhunt in the US is totally disgusting!! I no
> longer watch any news on American stations for that very reason.
>
> Sra. Heather
>
>