BCDEDIT PAE booting problems. System services failed to start.

[XiXi]

Hi, I tried to forcenable the PAE to get some advantage last week since I
have 4G memory on my 32bit Vista Ultimate Desktop. But after the reboot, I
found that many system services were unable to start with the PAE(Even IE is
not working) and I did not see any extra memory. I deleted the PAE value
anyway. Now I found that my computer will still come into this trouble in
most cases, even if I use forcedisable for the PAE. I have to pray that
everything will work when I boot my comuputer.
Anyone has any idea why my computer come into trouble after enable the PAE
and it is still in trouble even after I removed or forcedisabled the PAE?
I have tried a lot nx and PAE combination in the BCDEDIT(not all), but none
of them is working. My computer wil be failed to start a lot system services
during the booting in 90%. I can still enter the desktop enviroment(even aero
is workig), but I cannot do anything in those case(IE, WLM, SEP...not
working). Nowadays, I have to boot it for several times and wait for my lucky
strike that everything is working well and skip any possible restart.
Please kindly tell me if you have any ideas or suggestions. Thanks in
adavance!
Also, please feel free to ask me if you need any further info 'bout my
computer.

 

[Technologist]

Who is your mobo manufacturer?

 

[Mark L. Ferguson]

I would pull the RAM down to some minimum amount, restart, then replace the
RAM. Your BIOS is probably still 'mirroring' the extra RAM.

--
Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPost

Mark L. Ferguson

..
"XiXi" <XiXi@discussions.microsoft.com> wrote in message
news:385D1486-4CFC-4DEE-A686-C814457A823F@microsoft.com...
> Hi, I tried to forcenable the PAE to get some advantage last week since I
> have 4G memory on my 32bit Vista Ultimate Desktop. But after the reboot, I
> found that many system services were unable to start with the PAE(Even IE
> is
> not working) and I did not see any extra memory. I deleted the PAE value
> anyway. Now I found that my computer will still come into this trouble in
> most cases, even if I use forcedisable for the PAE. I have to pray that
> everything will work when I boot my comuputer.
> Anyone has any idea why my computer come into trouble after enable the PAE
> and it is still in trouble even after I removed or forcedisabled the PAE?
> I have tried a lot nx and PAE combination in the BCDEDIT(not all), but
> none
> of them is working. My computer wil be failed to start a lot system
> services
> during the booting in 90%. I can still enter the desktop enviroment(even
> aero
> is workig), but I cannot do anything in those case(IE, WLM, SEP...not
> working). Nowadays, I have to boot it for several times and wait for my
> lucky
> strike that everything is working well and skip any possible restart.
> Please kindly tell me if you have any ideas or suggestions. Thanks in
> adavance!
> Also, please feel free to ask me if you need any further info 'bout my
> computer.

 

[XiXi]

Sounds resaonable, I will try it this weekend and report back what happened.
Thanks

"Mark L. Ferguson" wrote:

> I would pull the RAM down to some minimum amount, restart, then replace the
> RAM. Your BIOS is probably still 'mirroring' the extra RAM.
>
> --
> Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPost
>
> Mark L. Ferguson
>
> .
> "XiXi" <XiXi@discussions.microsoft.com> wrote in message
> news:385D1486-4CFC-4DEE-A686-C814457A823F@microsoft.com...
> > Hi, I tried to forcenable the PAE to get some advantage last week since I
> > have 4G memory on my 32bit Vista Ultimate Desktop. But after the reboot, I
> > found that many system services were unable to start with the PAE(Even IE
> > is
> > not working) and I did not see any extra memory. I deleted the PAE value
> > anyway. Now I found that my computer will still come into this trouble in
> > most cases, even if I use forcedisable for the PAE. I have to pray that
> > everything will work when I boot my comuputer.
> > Anyone has any idea why my computer come into trouble after enable the PAE
> > and it is still in trouble even after I removed or forcedisabled the PAE?
> > I have tried a lot nx and PAE combination in the BCDEDIT(not all), but
> > none
> > of them is working. My computer wil be failed to start a lot system
> > services
> > during the booting in 90%. I can still enter the desktop enviroment(even
> > aero
> > is workig), but I cannot do anything in those case(IE, WLM, SEP...not
> > working). Nowadays, I have to boot it for several times and wait for my
> > lucky
> > strike that everything is working well and skip any possible restart.
> > Please kindly tell me if you have any ideas or suggestions. Thanks in
> > adavance!
> > Also, please feel free to ask me if you need any further info 'bout my
> > computer.
>

 

[XiXi]

It's an ASUS P5K PREMIUM/WIFI-AP.

"Technologist" wrote:

>
> Who is your mobo manufacturer?
>
>
> --
> Technologist
> Posted via http://windowsbb.com Forum to Usenet gateway
>
>

 

[XiXi]

hello,
I have tried so. But failed...
I found an memory remapping function in my bios.
I disabled it but still not working.
Any other ideas?
Appreciate!

"Mark L. Ferguson" wrote:

> I would pull the RAM down to some minimum amount, restart, then replace the
> RAM. Your BIOS is probably still 'mirroring' the extra RAM.
>
> --
> Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPost
>
> Mark L. Ferguson
>
> .
> "XiXi" <XiXi@discussions.microsoft.com> wrote in message
> news:385D1486-4CFC-4DEE-A686-C814457A823F@microsoft.com...
> > Hi, I tried to forcenable the PAE to get some advantage last week since I
> > have 4G memory on my 32bit Vista Ultimate Desktop. But after the reboot, I
> > found that many system services were unable to start with the PAE(Even IE
> > is
> > not working) and I did not see any extra memory. I deleted the PAE value
> > anyway. Now I found that my computer will still come into this trouble in
> > most cases, even if I use forcedisable for the PAE. I have to pray that
> > everything will work when I boot my comuputer.
> > Anyone has any idea why my computer come into trouble after enable the PAE
> > and it is still in trouble even after I removed or forcedisabled the PAE?
> > I have tried a lot nx and PAE combination in the BCDEDIT(not all), but
> > none
> > of them is working. My computer wil be failed to start a lot system
> > services
> > during the booting in 90%. I can still enter the desktop enviroment(even
> > aero
> > is workig), but I cannot do anything in those case(IE, WLM, SEP...not
> > working). Nowadays, I have to boot it for several times and wait for my
> > lucky
> > strike that everything is working well and skip any possible restart.
> > Please kindly tell me if you have any ideas or suggestions. Thanks in
> > adavance!
> > Also, please feel free to ask me if you need any further info 'bout my
> > computer.
>

 

[Mark L. Ferguson]

Service pack 1 for Vista will show you the ram available above 3 gigs. I'm
not sure the OS will ever use it.

--
Was this helpful? Then click the "Yes" Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPost

Mark L. Ferguson

..
"XiXi" <XiXi@discussions.microsoft.com> wrote in message
news:64480D5D-47F6-4B4A-9F65-D8D7884B34A2@microsoft.com...
> hello,
> I have tried so. But failed...
> I found an memory remapping function in my bios.
> I disabled it but still not working.
> Any other ideas?
> Appreciate!
>
> "Mark L. Ferguson" wrote:
>
>> I would pull the RAM down to some minimum amount, restart, then replace
>> the
>> RAM. Your BIOS is probably still 'mirroring' the extra RAM.
>>
>> --
>> Was this helpful? Then click the "Yes" Ratings button. Voting helps the
>> web
>> interface.
>> http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPost
>>
>> Mark L. Ferguson
>>
>> .
>> "XiXi" <XiXi@discussions.microsoft.com> wrote in message
>> news:385D1486-4CFC-4DEE-A686-C814457A823F@microsoft.com...
>> > Hi, I tried to forcenable the PAE to get some advantage last week since
>> > I
>> > have 4G memory on my 32bit Vista Ultimate Desktop. But after the
>> > reboot, I
>> > found that many system services were unable to start with the PAE(Even
>> > IE
>> > is
>> > not working) and I did not see any extra memory. I deleted the PAE
>> > value
>> > anyway. Now I found that my computer will still come into this trouble
>> > in
>> > most cases, even if I use forcedisable for the PAE. I have to pray that
>> > everything will work when I boot my comuputer.
>> > Anyone has any idea why my computer come into trouble after enable the
>> > PAE
>> > and it is still in trouble even after I removed or forcedisabled the
>> > PAE?
>> > I have tried a lot nx and PAE combination in the BCDEDIT(not all), but
>> > none
>> > of them is working. My computer wil be failed to start a lot system
>> > services
>> > during the booting in 90%. I can still enter the desktop
>> > enviroment(even
>> > aero
>> > is workig), but I cannot do anything in those case(IE, WLM, SEP...not
>> > working). Nowadays, I have to boot it for several times and wait for my
>> > lucky
>> > strike that everything is working well and skip any possible restart.
>> > Please kindly tell me if you have any ideas or suggestions. Thanks in
>> > adavance!
>> > Also, please feel free to ask me if you need any further info 'bout my
>> > computer.
>>