Trouble with new display and Device Manager

Warren · Feb 16, 2008

I had trouble getting the right drivers installed for my Viewsonic LCD.
Essentially I ended up booting up the machine with no drivers and Windows
installed a Default Monitor. After finally getting the correct drivers
installed on my computer the correct drivers where installed but the
computer still thinks there's an unknown monitor attached to the machine and
keeps recreating the Default Monitor at start-up.

How do I fix this false detection of an unknown monitor ?

philo · Feb 16, 2008

"Warren" <nospam@nospam.com> wrote in message
news:OKnuIxPcIHA.3940@TK2MSFTNGP05.phx.gbl...
> I had trouble getting the right drivers installed for my Viewsonic LCD.
> Essentially I ended up booting up the machine with no drivers and Windows
> installed a Default Monitor. After finally getting the correct drivers
> installed on my computer the correct drivers where installed but the
> computer still thinks there's an unknown monitor attached to the machine
and
> keeps recreating the Default Monitor at start-up.
>
> How do I fix this false detection of an unknown monitor ?
>
>

The way the monitor is listed is not important...
as long as your colors and resolution are OK, that's all you need to worry
about.

The settings for your *video card *are what you need to set...especially if
it's a wide screen

Jeff Richards · Feb 16, 2008

Allow it to install the default monitor, then go into Device Manager and
mark it as disabled.
--
Jeff Richards
MS MVP (Windows - Shell/User)
"Warren" <nospam@nospam.com> wrote in message
news:OKnuIxPcIHA.3940@TK2MSFTNGP05.phx.gbl...
>I had trouble getting the right drivers installed for my Viewsonic LCD.
> Essentially I ended up booting up the machine with no drivers and Windows
> installed a Default Monitor. After finally getting the correct drivers
> installed on my computer the correct drivers where installed but the
> computer still thinks there's an unknown monitor attached to the machine
> and
> keeps recreating the Default Monitor at start-up.
>
> How do I fix this false detection of an unknown monitor ?
>
>

dadiOH · Feb 17, 2008

Warren wrote:
> I had trouble getting the right drivers installed for my Viewsonic
> LCD. Essentially I ended up booting up the machine with no drivers
> and Windows installed a Default Monitor. After finally getting the
> correct drivers installed on my computer the correct drivers where
> installed but the computer still thinks there's an unknown monitor
> attached to the machine and keeps recreating the Default Monitor at
> start-up.
>
> How do I fix this false detection of an unknown monitor ?

Nvidia video card? They alway have "defaul monitor" listed. No big
deal, leave it alone.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

PCR · Feb 18, 2008

Warren wrote:
| I had trouble getting the right drivers installed for my Viewsonic
| LCD. Essentially I ended up booting up the machine with no drivers
| and Windows installed a Default Monitor. After finally getting the
| correct drivers installed on my computer the correct drivers where
| installed but the computer still thinks there's an unknown monitor
| attached to the machine and keeps recreating the Default Monitor at
| start-up.
|
| How do I fix this false detection of an unknown monitor ?

(1) Boot to Safe Mode
(Hold F5 as you boot or CTRL for the Startup Menu)
(2) "START, Settings, Control Panel, System, Device Manager tab"
(3) Open the Monitors branch, & Remove all entries.

Perhaps, FIRST, even in Normal Mode, note what is
currently installed. That is...
(a) D-Clk the monitor there for Properties, Driver tab.
(b) Click the Update Driver button, then "Next".
(c) Bolt "Display a list...", & click "Next".
(d) Bolt "Show all hardware".
Examine the two panes to see what is currently installed.
That is likely what you wish to end up with, after step (4).

(4) Boot to Normal Mode.

Hopefully, the correct monitor will be rediscovered & installed & the
other will be gone.

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net

Warren · Feb 19, 2008

That's what I was looking for, but I couldn't remember. I've seen
technicians clear all devices and let the system rebuild from scratch.

There were a lot of Plug & Play entries in Safe Mode view of Device Manager
that were cleaned up but unfortuately that Default monitor is still being
redetected.

Perhaps the Display Adapter is the problem, maybe it remembers it has two
monitors ? Should I remove it in the Device Manager first, and let the
system rebuild before trying to remove the Default monitor ?

"PCR" <pcrrcp@netzero.net> wrote in message
news:uyZf0CpcIHA.6080@TK2MSFTNGP05.phx.gbl...
> Warren wrote:
> | I had trouble getting the right drivers installed for my Viewsonic
> | LCD. Essentially I ended up booting up the machine with no drivers
> | and Windows installed a Default Monitor. After finally getting the
> | correct drivers installed on my computer the correct drivers where
> | installed but the computer still thinks there's an unknown monitor
> | attached to the machine and keeps recreating the Default Monitor at
> | start-up.
> |
> | How do I fix this false detection of an unknown monitor ?
>
> (1) Boot to Safe Mode
> (Hold F5 as you boot or CTRL for the Startup Menu)
> (2) "START, Settings, Control Panel, System, Device Manager tab"
> (3) Open the Monitors branch, & Remove all entries.
>
> Perhaps, FIRST, even in Normal Mode, note what is
> currently installed. That is...
> (a) D-Clk the monitor there for Properties, Driver tab.
> (b) Click the Update Driver button, then "Next".
> (c) Bolt "Display a list...", & click "Next".
> (d) Bolt "Show all hardware".
> Examine the two panes to see what is currently installed.
> That is likely what you wish to end up with, after step (4).
>
> (4) Boot to Normal Mode.
>
> Hopefully, the correct monitor will be rediscovered & installed & the
> other will be gone.
>
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp@netzero.net
>
>

PCR · Feb 19, 2008

Warren wrote:
| That's what I was looking for, but I couldn't remember. I've seen
| technicians clear all devices and let the system rebuild from scratch.
|
| There were a lot of Plug & Play entries in Safe Mode view of Device
| Manager that were cleaned up but unfortuately that Default monitor is
| still being redetected.

Hmm. Too bad the unknown monitor wouldn't go too.

(a) You have both a Default Monitor & a Viewsonic LCD showing
up under the Monitors branch in Device Manager?
(b) Did you remove them both before rebooting as instructed?
(c) What is highlighted in step 3d of my prior instructions for
each of them, when you "Show all hardware"?

I installed an LCD Envision EN5400e monitor myself, & all looks & works
fine, except at...

"START button, Run, MSInfo32, Components, Display"

Envision EN5400e
Monitor
Registry Key:
HKEY_LOCAL_MACHINE\enum\MONITOR\EPIE564\PCI_VEN_1023&DEV_8400&SUBSYS_B1A
B0E11&REV_5C_000800
Alloc resources: None
Forced resources: None
Boot resources: None
Filtered resources: None
Basic resources: None
Driver: Monitor\0000
Driver Date: 8-20-2004
Driver: EN5400e.icm
File Size: Driver Not Installed
File Date: Driver Not Installed

Use the mouse to highlight the monitor info & the Edit menu to copy &
post it. Are you seeing two monitors there, instead of just one?

| Perhaps the Display Adapter is the problem, maybe it remembers it has
| two monitors ? Should I remove it in the Device Manager first, and
| let the system rebuild before trying to remove the Default monitor ?

It could be worth a try. Important: At the point below where you "bolt
'Show all hardware'", ensure you copy down what is in the left & right
panes. Then, if you have no other way to get back your current display
adapter, you may go back into that screen to select it.

.......Quote..........
The first thing to do is to remove the video adapter you have
installed. Right-click on the desktop choose "Properties" from the
drop-down menu select "Settings" click on the "Advanced" button and
click on "Adapter". An adapter is a program that tells Windows how to
deal with a specific video card. Make note of the adapter that is
currently installed. Then, change the adapter to "Standard Display
Adapter (VGA)" and restart the system.

[That is: Click "Change button, Next, bolt 'Display a List...', Next,
bolt 'Show all hardware', scroll left pane to top, select '(Standard
display types)', select 'Standard Display Adapter (VGA)' in right pane,
click 'Next'"... PCR]

This will remove the current adapter and replace it with a generic VGA
adapter that works with all video cards. You will not like VGA because
it supports only 16 colors, but the purpose of installing it is to get
rid of whatever was there before.

Next, return to the adapter screen and install an adapter that matches
your video card. This may or may not be the adapter that you are
using now. Examine the materials you received with your computer to
see if they include a CD-ROM or floppy disk that contains the correct
video adapter. Or go to the Gateway website and see if they have an
adapter for you to download. Or check the website of the company that
made your video card.

Bill Starbuck (MVP)
.......End....of quote....

| "PCR" <pcrrcp@netzero.net> wrote in message
| news:uyZf0CpcIHA.6080@TK2MSFTNGP05.phx.gbl...
|> Warren wrote:
|> | I had trouble getting the right drivers installed for my Viewsonic
|> | LCD. Essentially I ended up booting up the machine with no drivers
|> | and Windows installed a Default Monitor. After finally getting the
|> | correct drivers installed on my computer the correct drivers where
|> | installed but the computer still thinks there's an unknown monitor
|> | attached to the machine and keeps recreating the Default Monitor at
|> | start-up.
|> |
|> | How do I fix this false detection of an unknown monitor ?
|>
|> (1) Boot to Safe Mode
|> (Hold F5 as you boot or CTRL for the Startup Menu)
|> (2) "START, Settings, Control Panel, System, Device Manager tab"
|> (3) Open the Monitors branch, & Remove all entries.
|>
|> Perhaps, FIRST, even in Normal Mode, note what is
|> currently installed. That is...
|> (a) D-Clk the monitor there for Properties, Driver tab.
|> (b) Click the Update Driver button, then "Next".
|> (c) Bolt "Display a list...", & click "Next".
|> (d) Bolt "Show all hardware".
|> Examine the two panes to see what is currently installed.
|> That is likely what you wish to end up with, after step
|> (4).
|>
|> (4) Boot to Normal Mode.
|>
|> Hopefully, the correct monitor will be rediscovered & installed & the
|> other will be gone.
|>
|>
|> --
|> Thanks or Good Luck,
|> There may be humor in this post, and,
|> Naturally, you will not sue,
|> Should things get worse after this,
|> PCR
|> pcrrcp@netzero.net

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net

Warren · Feb 20, 2008

(a) Yes both monitors show up under the Monitors branch

(b) Yes, I removed them both before rebooting

(c) Default monitor - Generic Television
VP930 monitor - %VCDTS21367-1% (I have no idea what this garbage is
but the seemingly more appropriate driver for VP 930 Series seems to be
available)

(d) ViewSonic VP930 Series
Monitor
Registry Key:
HKEY_LOCAL_MACHINE\enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117E
E&REV_01_000800
Alloc resources: None
Forced resources: None
Boot resources: None
Filtered resources: None
Basic resources: None
Driver: Monitor\0000
Driver Date: 2-16-2008
Driver: VP930_Series.ICM
File Size: Driver Not
Installed
File Date: Driver Not
Installed

Default Monitor
Monitor
This device is disabled.
Registry Key:
HKEY_LOCAL_MACHINE\enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS
_280117EE&REV_01_000800_1
Alloc resources: None
Forced resources: None
Boot resources: None
Filtered resources: None
Basic resources: None
Driver: Monitor\0002
Driver Date: 4-23-1999

"PCR" <pcrrcp@netzero.net> wrote in message
news:OQHtEg2cIHA.748@TK2MSFTNGP04.phx.gbl...
> Warren wrote:
> | That's what I was looking for, but I couldn't remember. I've seen
> | technicians clear all devices and let the system rebuild from scratch.
> |
> | There were a lot of Plug & Play entries in Safe Mode view of Device
> | Manager that were cleaned up but unfortuately that Default monitor is
> | still being redetected.
>
> Hmm. Too bad the unknown monitor wouldn't go too.
>
> (a) You have both a Default Monitor & a Viewsonic LCD showing
> up under the Monitors branch in Device Manager?
> (b) Did you remove them both before rebooting as instructed?
> (c) What is highlighted in step 3d of my prior instructions for
> each of them, when you "Show all hardware"?
>
> I installed an LCD Envision EN5400e monitor myself, & all looks & works
> fine, except at...
>
> "START button, Run, MSInfo32, Components, Display"
>
> Envision EN5400e
> Monitor
> Registry Key:
> HKEY_LOCAL_MACHINE\enum\MONITOR\EPIE564\PCI_VEN_1023&DEV_8400&SUBSYS_B1A
> B0E11&REV_5C_000800
> Alloc resources: None
> Forced resources: None
> Boot resources: None
> Filtered resources: None
> Basic resources: None
> Driver: Monitor\0000
> Driver Date: 8-20-2004
> Driver: EN5400e.icm
> File Size: Driver Not Installed
> File Date: Driver Not Installed
>
> Use the mouse to highlight the monitor info & the Edit menu to copy &
> post it. Are you seeing two monitors there, instead of just one?
>
> | Perhaps the Display Adapter is the problem, maybe it remembers it has
> | two monitors ? Should I remove it in the Device Manager first, and
> | let the system rebuild before trying to remove the Default monitor ?
>
> It could be worth a try. Important: At the point below where you "bolt
> 'Show all hardware'", ensure you copy down what is in the left & right
> panes. Then, if you have no other way to get back your current display
> adapter, you may go back into that screen to select it.
>
> ......Quote..........
> The first thing to do is to remove the video adapter you have
> installed. Right-click on the desktop choose "Properties" from the
> drop-down menu select "Settings" click on the "Advanced" button and
> click on "Adapter". An adapter is a program that tells Windows how to
> deal with a specific video card. Make note of the adapter that is
> currently installed. Then, change the adapter to "Standard Display
> Adapter (VGA)" and restart the system.
>
> [That is: Click "Change button, Next, bolt 'Display a List...', Next,
> bolt 'Show all hardware', scroll left pane to top, select '(Standard
> display types)', select 'Standard Display Adapter (VGA)' in right pane,
> click 'Next'"... PCR]
>
> This will remove the current adapter and replace it with a generic VGA
> adapter that works with all video cards. You will not like VGA because
> it supports only 16 colors, but the purpose of installing it is to get
> rid of whatever was there before.
>
> Next, return to the adapter screen and install an adapter that matches
> your video card. This may or may not be the adapter that you are
> using now. Examine the materials you received with your computer to
> see if they include a CD-ROM or floppy disk that contains the correct
> video adapter. Or go to the Gateway website and see if they have an
> adapter for you to download. Or check the website of the company that
> made your video card.
>
> Bill Starbuck (MVP)
> ......End....of quote....
>
> | "PCR" <pcrrcp@netzero.net> wrote in message
> | news:uyZf0CpcIHA.6080@TK2MSFTNGP05.phx.gbl...
> |> Warren wrote:
> |> | I had trouble getting the right drivers installed for my Viewsonic
> |> | LCD. Essentially I ended up booting up the machine with no drivers
> |> | and Windows installed a Default Monitor. After finally getting the
> |> | correct drivers installed on my computer the correct drivers where
> |> | installed but the computer still thinks there's an unknown monitor
> |> | attached to the machine and keeps recreating the Default Monitor at
> |> | start-up.
> |> |
> |> | How do I fix this false detection of an unknown monitor ?
> |>
> |> (1) Boot to Safe Mode
> |> (Hold F5 as you boot or CTRL for the Startup Menu)
> |> (2) "START, Settings, Control Panel, System, Device Manager tab"
> |> (3) Open the Monitors branch, & Remove all entries.
> |>
> |> Perhaps, FIRST, even in Normal Mode, note what is
> |> currently installed. That is...
> |> (a) D-Clk the monitor there for Properties, Driver tab.
> |> (b) Click the Update Driver button, then "Next".
> |> (c) Bolt "Display a list...", & click "Next".
> |> (d) Bolt "Show all hardware".
> |> Examine the two panes to see what is currently installed.
> |> That is likely what you wish to end up with, after step
> |> (4).
> |>
> |> (4) Boot to Normal Mode.
> |>
> |> Hopefully, the correct monitor will be rediscovered & installed & the
> |> other will be gone.
> |>
> |>
> |> --
> |> Thanks or Good Luck,
> |> There may be humor in this post, and,
> |> Naturally, you will not sue,
> |> Should things get worse after this,
> |> PCR
> |> pcrrcp@netzero.net
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp@netzero.net
>
>

Franc Zabkar · Feb 20, 2008

On Sat, 16 Feb 2008 18:30:15 -0500, "Warren" <nospam@nospam.com> put
finger to keyboard and composed:

>I had trouble getting the right drivers installed for my Viewsonic LCD.
>Essentially I ended up booting up the machine with no drivers and Windows
>installed a Default Monitor. After finally getting the correct drivers
>installed on my computer the correct drivers where installed but the
>computer still thinks there's an unknown monitor attached to the machine and
>keeps recreating the Default Monitor at start-up.
>
>How do I fix this false detection of an unknown monitor ?

Just to complicate things for you, here is my registry entry (non-PnP
monitor):

======================================================
[HKEY_LOCAL_MACHINE\Enum\MONITOR]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\0001]
"Capabilities"=hex:14,00,00,00
"InitMonitorPowerState"="0f"
"HardwareID"="Monitor\\API761E"
"ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
"Class"="Monitor"
"Driver"="Monitor\\0000"
"Mfg"="MEA"
"DeviceDesc"="Diamond View DV152"
"ConfigFlags"=hex:00,00,00,00
======================================================

I have a 15" LCD monitor attached to a PCI graphics card. Device
Manager does not show a Default Monitor, only a "Diamond View DV152".

FWIW, the DDC pins, which are required for PnP, are not present in my
VGA cable. This is because I'm going through a KVM box and I have used
an extension cable from an old non-DDC monitor. DDC allows the monitor
to communicate its capabilities to the graphics card, thus providing
PnP support. By disabling DDC, I effectively have a non-PnP monitor.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

PCR · Feb 20, 2008

Warren · Feb 20, 2008

!!!Please see comments below

"PCR" <pcrrcp@netzero.net> wrote in message
news:u2ynvpDdIHA.2404@TK2MSFTNGP05.phx.gbl...
> Warren wrote:
> | (a) Yes both monitors show up under the Monitors branch
> |
> | (b) Yes, I removed them both before rebooting
>
> Yea. That was right.
>
> Looking below, I see the Default Monitor has the notation: "This device
> is disabled". Was it like that before you attempted to remove them both
> in Safe Mode? Or did you disable it afterwards per Richards's
> instruction? Can it be it needs to be enabled before it can be removed?
> I might try that...

!!!Yes Default Monitor was enabled when I removed it.

> That's done at the General tab of the monitor's Properties by unchecking
> "Disable in this hardware profile". Also, it seems "Exists in all
> hardware profiles" is normally checked.
>
> Have you ever actually created multiple hardware profiles? I have no
> experience with that. At... "Control Panel, System, Hardware Profiles
> tab"... all I see is "Original Configuration".

!!!No

> | (c) Default monitor - Generic Television
>
> If I were to select "(Standard monitor types)" in the left
> (Manufacturers) pane, then (among others), I am offered "Generic
> Television" in the right (Models) pane. So, that almost sounds right--
> IF you wanted it.

!!!Yes, "Standard monitor types was in left window" and "Generic Television"
in the right window

> | VP930 monitor - %VCDTS21367-1% (I have no idea what this
> | garbage is but the seemingly more appropriate driver for VP 930
> | Series seems to be available)
>
> That doesn't sound exactly right. At that screen...
>
> "Device Manager, Monitors branch, D-Clk 'Envision EN5400e', Driver tab,
> Update Driver button, Next, bolt 'Display a list...", Next, bolt 'Show
> all hardware"
>
> ..., in the left (Manufacturers) pane, I see...
>
> Envision Peripherals, Inc
>
> ..., &, in the right (Models) pane, I see...
>
> Envision EN5400e
>
> ...You seem to be seeing gobbledygook in the Models pane at least! YET,
> the following ViewSonic VP930 Series entry looks perfectly fine to me in
> your MSInfo32 screen...

!!!Yes I have "Viewsonic" in the left window and "%VCDTS21367-1%" in the
right window. Unfortunately when I select the VP930 Series entry in the
right window, it wants the CD_ROM but can't find the files it wants (even
though I know they are there). This is the scenario that caused the
creation of the Default Monitor in the first place, the machine couldn't get
the drivers off the CD-ROM for some silly reason.

!!!I've sent an e-mail to Viewsonic asking if this driver "%VCDTS21367-1%"
is appropriate, and if not how to change it. I'm also not sure where the
driver installer placed all the drivers.

> | (d) ViewSonic VP930 Series
> | Monitor
> | Registry Key:
> |
> HKEY_LOCAL_MACHINE\enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280
> 117E
> | E&REV_01_000800
> | Alloc resources: None
> | Forced resources: None
> | Boot resources: None
> | Filtered resources: None
> | Basic resources: None
> | Driver: Monitor\0000
> | Driver Date: 2-16-2008
> | Driver: VP930_Series.ICM
> | File Size: Driver
> | Not Installed
> | File Date: Driver
> | Not Installed
>
> The above looks a lot like mine-- which works perfectly! And I get no
> Default Monitor anywhere.
>
> (1) Post your Registry key, as Zabcar did...
>
> HKEY_LOCAL_MACHINE\Enum\MONITOR
>
> (a) "START button, Run, RegEdit".
> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
> (c) Click the plus sign left of "Enum".
> (d) Click "MONITOR" in the left pane.
> (e) Click "Export Registry File" in the "Registry" menu.
>
> Have it create a ".txt" file. It will contain the Key that is
> selected in the left pane, it's sub-keys & the data in the
> right pane.
>
> (f) Close RegEdit, & post the file.

[HKEY_LOCAL_MACHINE\Enum\MONITOR]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117
EE&REV_01_000800]
"Capabilities"=hex:14,00,00,00
"InitMonitorPowerState"="0f"
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,5a,63,1b,e4,01,01,01,01,14,10,01,03,0e,26
,\

1f,78,2e,11,45,a4,5a,4a,a0,24,14,50,54,bf,ef,80,81,80,81,40,71,4f,01,01,01,\

01,01,01,01,01,01,01,30,2a,00,98,51,00,2a,40,30,70,13,00,78,36,11,00,00,1e,\

00,00,00,ff,00,51,38,48,30,36,32,30,30,31,32,35,30,0a,00,00,00,fd,00,32,4b,\

1e,52,0e,00,0a,20,20,20,20,20,20,00,00,00,fc,00,56,50,39,33,30,20,53,65,72,\
69,65,73,0a,00,e5
"HardwareID"="Monitor\\VSCE41B"
"Class"="Monitor"
"SerialNum"="Q8H062001250"
"DeviceDesc"="ViewSonic VP930 Series"
"MaxResolution"="1280,1024"
"MonitorRanges"="30-82,50-75,+,+"
"DPMS"="1"
"ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
"Driver"="Monitor\\0000"
"Mfg"="ViewSonic"
"ConfigFlags"=hex:00,00,00,00

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSY
S_280117EE&REV_01_000800_1]
"Capabilities"=hex:14,00,00,00
"InitMonitorPowerState"="0f"
"HardwareID"="Monitor\\Default_Monitor"
"ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
"Class"="Monitor"
"Driver"="Monitor\\0002"
"Mfg"="(Standard monitor types)"
"DeviceDesc"="Default Monitor"
"ConfigFlags"=hex:00,00,00,00

> I expect we will see two sub-keys under "MONITOR". Also, post the .inf
> that creates the ViewSonic VP930 Series entry...
>
> (a) "START button, Find, F/F"
> (b) Leave "Named" empty.
> (c) In "Containing text", enter... "ViewSonic VP930 Series"
> with the quotes.
> (d) In "Look in", browse to... "C:\WINDOWS\INF".

!!!Nothing found searching for text "VSCE41B"
!!!VS080114_I19.inf found searching for text "ViewSonic VP930 Series".

> Open the .inf file that shows up in Notepad, & post it. If "ViewSonic
> VP930 Series" won't find it, then try "VSCE41B", no quotes necessary.

Monitor.Inf for Windows(R) 95/98/Me/2000/XP/Server 2003/XP x64/Vista/Vista
x64

Copyright 2008, ViewSonic Corporation

[Version]
signature="$CHICAGO$"
Class=Monitor
ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
Provider=%ViewSonic%
DriverVer=01/14/2008, 1.5.2.44

[DestinationDirs]
DefaultDestDir= 11
VLCDS23433-1W1.CopyFiles=23
VLCDS23668-1W.CopyFiles=23
VLCDS24020-1W.CopyFiles=23
VLCDS24020-2W.CopyFiles=23
VLCDS26105-2W.CopyFiles=23
VLCDS25973-1W.CopyFiles=23
VLCDS25973-2W.CopyFiles=23
VLCDS25973-3W.CopyFiles=23
VLCDS27384-2W.CopyFiles=23
VLCDS27944-4W.CopyFiles=23
VLCDS27944-3W.CopyFiles=23
VLCDS27384-1W.CopyFiles=23
VX910.CopyFiles=23
VG900.CopyFiles=23
Q190mb.CopyFiles=23
VP912s.CopyFiles=23
VX924.CopyFiles=23
VX912.CopyFiles=23
VP912b.CopyFiles=23
VE902m.CopyFiles=23
VA912.CopyFiles=23
VA912b.CopyFiles=23
VE910.CopyFiles=23
VP191b-2.CopyFiles=23
VP191s-2.CopyFiles=23
VA912-2.CopyFiles=23
VG920.CopyFiles=23
VTA900.CopyFiles=23
VA905.CopyFiles=23
VA915.CopyFiles=23
VA902.CopyFiles=23
VA902_Series.CopyFiles=23
VE910-3.CopyFiles=23
VP930_Series.CopyFiles=23
VA912-3.CopyFiles=23
Q9.CopyFiles=23
VA912-4.CopyFiles=23
VA1912w.CopyFiles=23
VX922.CopyFiles=23
VX912-3.CopyFiles=23
VA902-2.CopyFiles=23
VP920_Series.CopyFiles=23
VA912-5.CopyFiles=23
VX912-4.CopyFiles=23
VA903.CopyFiles=23
VE920m.CopyFiles=23
Q9b-2.CopyFiles=23
VA903-2.CopyFiles=23
VE1920wm.CopyFiles=23
VG921m.CopyFiles=23
VX1935wm.CopyFiles=23
N1900w.CopyFiles=23
VA902-3.CopyFiles=23
VA903-3.CopyFiles=23
VG1921wm.CopyFiles=23
VA1912w-2.CopyFiles=23
VG1930wm.CopyFiles=23
Q19wb.CopyFiles=23
VX1935wm-3.CopyFiles=23
VX1945wm-3.CopyFiles=23
Q9-3.CopyFiles=23
VA913.CopyFiles=23
VG930m-3.CopyFiles=23
VA930m.CopyFiles=23
VA1930wm.CopyFiles=23
Q191wb.CopyFiles=23
Q19wb-2.CopyFiles=23
VA1903w.CopyFiles=23
VX1932wm.CopyFiles=23
VA1930wm-3.CopyFiles=23
VA1916w.CopyFiles=23
VA1926w.CopyFiles=23
VX1940w.CopyFiles=23
VA916.CopyFiles=23
VA926.CopyFiles=23
NX1932w.CopyFiles=23
VP950B.CopyFiles=23
NX1940w.CopyFiles=23
Q191wb-2.CopyFiles=23
VX1962wm.CopyFiles=23
Q191WB-3.CopyFiles=23
Q91b.CopyFiles=23
N1930w.CopyFiles=23

[SourceDisksNames]
1=%DiskLabel%,,

[SourceDisksFiles]
VG191.ICm=1
VG191b.ICm=1
VX900.ICM=1
VA930.ICM=1
VG900b.ICM=1
VX900-2.ICM=1
VP191.ICM=1
VP191b.ICM=1
VP191s.ICM=1
VT950.ICM=1
VG910b.ICM=1
VG910s.ICM=1
VX950.ICM=1
VX910.ICM=1
VG900.ICM=1
Q190mb.ICM=1
VP912s.ICM=1
VX924.ICM=1
VX912.ICM=1
VP912b.ICM=1
VE902m.ICM=1
VA912.ICM=1
VA912b.ICM=1
VE910.ICM=1
VP191b-2.ICM=1
VP191s-2.ICM=1
VA912-2.ICM=1
VG920.ICM=1
VTA900.ICM=1
VA905.ICM=1
VA915.ICM=1
VA902.ICM=1
VA902_Series.ICM=1
VE910-3.ICM=1
VP930_Series.ICM=1
VA912-3.ICM=1
Q9_SERIES.ICM=1
VA912-4SERIES.ICM=1
VA1912wSERIES.ICM=1
VX922.ICM=1
VX912-3.ICM=1
VA902-2_SERIES.ICM=1
VP920_Series.ICM=1
VA912-5_SERIES.ICM=1
VX912-4.ICM=1
VA903_SERIES.ICM=1
VE920m.ICM=1
Q9b-2.ICM=1
VA903-2_SERIES.ICM=1
VE1920wm_SERIES.ICM=1
VG921m.ICM=1
VX1935wm.ICM=1
N1900w.ICM=1
VA902-3_SERIES.ICM=1
VA903-3_SERIES.ICM=1
VG1921wm_SERIES.ICM=1
VA1912w-2_SERIES.ICM=1
VG1930wm.ICM=1
Q19wb.ICM=1
VX1935wm-3.ICM=1
VX1945wm-3.ICM=1
Q9-3.ICM=1
VA913.ICM=1
VG930m-3.ICM=1
VA930m.ICM=1
VA1930wm.ICM=1
Q191wb.ICM=1
Q19wb-2.ICM=1
VA1903w_SERIES.ICM=1
VX1932wm.ICM=1
VA1930wm-3.ICM=1
VA1916w_SERIES.ICM=1
VA1926w_SERIES.ICM=1
VX1940w.ICM=1
VA916_SERIES.icm=1
VA926_SERIES.icm=1
NX1932w.ICM=1
VP950B.ICM=1
NX1940w.ICM=1
Q191wb-2.ICM=1
VX1962wm_SERIES.ICM=1
Q191WB-3.ICM=1
Q91b.ICM=1
N1930w.ICM=1

[Manufacturer]
%ViewSonic%=ViewSonic,NTia64,NTamd64

[ControlFlags]
ExcludeFromSelect.nt=*

[ViewSonic]
%VLCDS23433-1W%=VLCDS23433-1W.Install,Monitor\VSC2007 VG191
%VLCDS23433-1W1%=VLCDS23433-1W1.Install,Monitor\VSC2107 VG191b
%VLCDS23668-1W%=VLCDS23668-1W.Install,Monitor\VSC080B VX900
%VLCDS24020-1W%=VLCDS24020-1W.Install,Monitor\VSC6B09 VA930
%VLCDS24020-2W%=VLCDS24020-2W.Install,Monitor\VSC240E VG900b
%VLCDS26105-2W%=VLCDS26105-2W.Install,Monitor\VSC9011 VX900-2
%VLCDS25973-1W%=VLCDS25973-1W.Install,Monitor\VSC0D11 VP191
%VLCDS25973-2W%=VLCDS25973-2W.Install,Monitor\VSC0E11 VP191b
%VLCDS25973-3W%=VLCDS25973-3W.Install,Monitor\VSCB916 VP191s
%VLCDS27384-2W%=VLCDS27384-2W.Install,Monitor\VSC1B12 VT950
%VLCDS27944-4W%=VLCDS27944-4W.Install,Monitor\VSCDB18 VG910b
%VLCDS27944-3W%=VLCDS27944-3W.Install,Monitor\VSCDA18 VG910s
%VLCDS27384-1W%=VLCDS27384-1W.Install,Monitor\VSC8F16 VX950
%VX910%=VX910.Install,Monitor\VSC3C19
%VG900%=VG900.Install,Monitor\VSC1F11
%Q190mb%=Q190mb.Install,Monitor\VSC0B1A
%VP912s%=VP912s.Install,Monitor\VSC651A
%VX924%=VX924.Install,Monitor\VSC0F1C
%VX912%=VX912.Install,Monitor\VSC8D1A
%VP912b%=VP912b.Install,Monitor\VSC661A
%VE902m%=VE902m.Install,Monitor\VSC491B
%VA912%=VA912.Install,Monitor\VSCC71B
%VA912b%=VA912b.Install,Monitor\VSCCF1B
%VE910%=VE910.Install,Monitor\VSCDA1B
%VP191b-2%=VP191b-2.Install,Monitor\VSCD51B
%VP191s-2%=VP191s-2.Install,Monitor\VSCD71B
%VA912-2%=VA912-2.Install,Monitor\VSCF61B
%VG920%=VG920.Install,Monitor\VSC251C
%VTA900%=VTA900.Install,Monitor\VSC0C1C
%VA905%=VA905.Install,Monitor\VSC341C
%VA915%=VA915.Install,Monitor\VSC331C
%VA902%=VA902.Install,Monitor\VSC1B1C
%VA902_Series%=VA902_Series.Install,Monitor\VSC211C VA902_Series
%VE910-3%=VE910-3.Install,Monitor\VSC501C VE910-3/VE910b-3
%VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
%VA912-3%=VA912-3.Install,Monitor\VSC4E1C VA912-3/VA912b-3
%Q9%=Q9.Install,Monitor\VSC6E1C Q9 Series
%VA912-4%=VA912-4.Install,Monitor\VSC721C VA912-4/VA912b-4
%VA1912w%=VA1912w.Install,Monitor\VSC711C VA1912w/VA1912wb
%VX922%=VX922.Install,Monitor\VSCAD1C
%VX912-3%=VX912-3.Install,Monitor\VSCD71C
%VA902-2%=VA902-2.Install,Monitor\VSC981D
%VP920_Series%=VP920_Series.Install,Monitor\VSCB01C
%VA912-5%=VA912-5.Install,Monitor\VSCB71D VA912-5 Series
%VX912-4%=VX912-4.Install,Monitor\VSCD71C
%VA903%=VA903.Install,Monitor\VSC111E
%VE920m%=VE920m.Install,Monitor\VSC031E
%Q9b-2%=Q9b-2.Install,Monitor\VSCC01D
%VA903-2%=VA903-2.Install,Monitor\VSC281E
%VE1920wm%=VE1920wm.Install,Monitor\VSC501E
%VG921m%=VG921m.Install,Monitor\VSC301E
%VX1935wm%=VX1935wm.Install,Monitor\VSC2A1E
%N1900w%=N1900w.Install,Monitor\VSCEA1D
%VA902-3%=VA902-3.Install,Monitor\VSC671E
%VA903-3%=VA903-3.Install,Monitor\VSC701E
%VG1921wm%=VG1921wm.Install,Monitor\VSC5E1E
%VA1912w-2%=VA1912w-2.Install,Monitor\VSC711C
%VG1930wm%=VG1930wm.Install,Monitor\VSC9D1E
%Q19wb%=Q19wb.Install,Monitor\VSCB71E
%VX1935wm-3%=VX1935wm-3.Install,Monitor\VSCB81E
%VX1945wm-3%=VX1945wm-3.Install,Monitor\VSCB91E
%Q9-3%=Q9-3.Install,Monitor\VSCC31E
%VA913%=VA913.Install,Monitor\VSCCE1E
%VG930m-3%=VG930m-3.Install,Monitor\VSC991E
%VA930m%=VA930m.Install,Monitor\VSCFB1E
%VA1930wm%=VA1930wm.Install,Monitor\VSC171F
%Q191wb%=Q191wb.Install,Monitor\VSC4E1F
%Q19wb-2%=Q19wb-2.Install,Monitor\VSC3E1F
%VA1903w%=VA1903w.Install,Monitor\VSC701F
%VX1932wm%=VX1932wm.Install,Monitor\VSCD41F
%VA1930wm-3%=VA1930wm-3.Install,Monitor\VSC0220
%VA1916w%=VA1916w.Install,Monitor\VSCF91F
%VA1926w%=VA1926w.Install,Monitor\VSC5920
%VG1921wm_Series%=VG1921wm.Install,Monitor\VSC0520
%VX1940w%=VX1940w.Install,Monitor\VSC6A20
%VA916%=VA916.Install,Monitor\VSC7C20
%VA926%=VA926.Install,Monitor\VSC7D20
%NX1932w%=NX1932w.Install,Monitor\VSC6020
%VP950B%=VP950B.Install,Monitor\VSCA720
%NX1940w%=NX1940w.Install,Monitor\VSC6D20
%Q191wb-2%=Q191wb-2.Install,Monitor\VSCF220
%VX1962wm%=VX1962wm.Install,Monitor\VSCD920
%Q191WB-3%=Q191WB-3.Install,Monitor\VSC5D21
%Q91b%=Q91b.Install,Monitor\VSC6A21
%N1930w%=N1930w.Install,Monitor\VSC6721

[ViewSonic.NTia64]
%VLCDS23433-1W%=VLCDS23433-1W.Install,Monitor\VSC2007 VG191
%VLCDS23433-1W1%=VLCDS23433-1W1.Install,Monitor\VSC2107 VG191b
%VLCDS23668-1W%=VLCDS23668-1W.Install,Monitor\VSC080B VX900
%VLCDS24020-1W%=VLCDS24020-1W.Install,Monitor\VSC6B09 VA930
%VLCDS24020-2W%=VLCDS24020-2W.Install,Monitor\VSC240E VG900b
%VLCDS26105-2W%=VLCDS26105-2W.Install,Monitor\VSC9011 VX900-2
%VLCDS25973-1W%=VLCDS25973-1W.Install,Monitor\VSC0D11 VP191
%VLCDS25973-2W%=VLCDS25973-2W.Install,Monitor\VSC0E11 VP191b
%VLCDS25973-3W%=VLCDS25973-3W.Install,Monitor\VSCB916 VP191s
%VLCDS27384-2W%=VLCDS27384-2W.Install,Monitor\VSC1B12 VT950
%VLCDS27944-4W%=VLCDS27944-4W.Install,Monitor\VSCDB18 VG910b
%VLCDS27944-3W%=VLCDS27944-3W.Install,Monitor\VSCDA18 VG910s
%VLCDS27384-1W%=VLCDS27384-1W.Install,Monitor\VSC8F16 VX950
%VX910%=VX910.Install,Monitor\VSC3C19
%VG900%=VG900.Install,Monitor\VSC1F11
%Q190mb%=Q190mb.Install,Monitor\VSC0B1A
%VP912s%=VP912s.Install,Monitor\VSC651A
%VX924%=VX924.Install,Monitor\VSC0F1C
%VX912%=VX912.Install,Monitor\VSC8D1A
%VP912b%=VP912b.Install,Monitor\VSC661A
%VE902m%=VE902m.Install,Monitor\VSC491B
%VA912%=VA912.Install,Monitor\VSCC71B
%VA912b%=VA912b.Install,Monitor\VSCCF1B
%VE910%=VE910.Install,Monitor\VSCDA1B
%VP191b-2%=VP191b-2.Install,Monitor\VSCD51B
%VP191s-2%=VP191s-2.Install,Monitor\VSCD71B
%VA912-2%=VA912-2.Install,Monitor\VSCF61B
%VG920%=VG920.Install,Monitor\VSC251C
%VTA900%=VTA900.Install,Monitor\VSC0C1C
%VA905%=VA905.Install,Monitor\VSC341C
%VA915%=VA915.Install,Monitor\VSC331C
%VA902%=VA902.Install,Monitor\VSC1B1C
%VA902_Series%=VA902_Series.Install,Monitor\VSC211C VA902_Series
%VE910-3%=VE910-3.Install,Monitor\VSC501C VE910-3/VE910b-3
%VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
%VA912-3%=VA912-3.Install,Monitor\VSC4E1C VA912-3/VA912b-3
%Q9%=Q9.Install,Monitor\VSC6E1C Q9 Series
%VA912-4%=VA912-4.Install,Monitor\VSC721C VA912-4/VA912b-4
%VA1912w%=VA1912w.Install,Monitor\VSC711C VA1912w/VA1912wb
%VX922%=VX922.Install,Monitor\VSCAD1C
%VX912-3%=VX912-3.Install,Monitor\VSCD71C
%VA902-2%=VA902-2.Install,Monitor\VSC981D
%VP920_Series%=VP920_Series.Install,Monitor\VSCB01C
%VA912-5%=VA912-5.Install,Monitor\VSCB71D VA912-5 Series
%VX912-4%=VX912-4.Install,Monitor\VSCD71C
%VA903%=VA903.Install,Monitor\VSC111E
%VE920m%=VE920m.Install,Monitor\VSC031E
%Q9b-2%=Q9b-2.Install,Monitor\VSCC01D
%VA903-2%=VA903-2.Install,Monitor\VSC281E
%VE1920wm%=VE1920wm.Install,Monitor\VSC501E
%VG921m%=VG921m.Install,Monitor\VSC301E
%VX1935wm%=VX1935wm.Install,Monitor\VSC2A1E
%N1900w%=N1900w.Install,Monitor\VSCEA1D
%VA902-3%=VA902-3.Install,Monitor\VSC671E
%VA903-3%=VA903-3.Install,Monitor\VSC701E
%VG1921wm%=VG1921wm.Install,Monitor\VSC5E1E
%VA1912w-2%=VA1912w-2.Install,Monitor\VSC711C
%VG1930wm%=VG1930wm.Install,Monitor\VSC9D1E
%Q19wb%=Q19wb.Install,Monitor\VSCB71E
%VX1935wm-3%=VX1935wm-3.Install,Monitor\VSCB81E
%VX1945wm-3%=VX1945wm-3.Install,Monitor\VSCB91E
%Q9-3%=Q9-3.Install,Monitor\VSCC31E
%VA913%=VA913.Install,Monitor\VSCCE1E
%VG930m-3%=VG930m-3.Install,Monitor\VSC991E
%VA930m%=VA930m.Install,Monitor\VSCFB1E
%VA1930wm%=VA1930wm.Install,Monitor\VSC171F
%Q191wb%=Q191wb.Install,Monitor\VSC4E1F
%Q19wb-2%=Q19wb-2.Install,Monitor\VSC3E1F
%VA1903w%=VA1903w.Install,Monitor\VSC701F
%VX1932wm%=VX1932wm.Install,Monitor\VSCD41F
%VA1930wm-3%=VA1930wm-3.Install,Monitor\VSC0220
%VA1916w%=VA1916w.Install,Monitor\VSCF91F
%VA1926w%=VA1926w.Install,Monitor\VSC5920
%VG1921wm_Series%=VG1921wm.Install,Monitor\VSC0520
%VX1940w%=VX1940w.Install,Monitor\VSC6A20
%VA916%=VA916.Install,Monitor\VSC7C20
%VA926%=VA926.Install,Monitor\VSC7D20
%NX1932w%=NX1932w.Install,Monitor\VSC6020
%VP950B%=VP950B.Install,Monitor\VSCA720
%NX1940w%=NX1940w.Install,Monitor\VSC6D20
%Q191wb-2%=Q191wb-2.Install,Monitor\VSCF220
%VX1962wm%=VX1962wm.Install,Monitor\VSCD920
%Q191WB-3%=Q191WB-3.Install,Monitor\VSC5D21
%Q91b%=Q91b.Install,Monitor\VSC6A21
%N1930w%=N1930w.Install,Monitor\VSC6721

[ViewSonic.NTamd64]
%VLCDS23433-1W%=VLCDS23433-1W.Install,Monitor\VSC2007 VG191
%VLCDS23433-1W1%=VLCDS23433-1W1.Install,Monitor\VSC2107 VG191b
%VLCDS23668-1W%=VLCDS23668-1W.Install,Monitor\VSC080B VX900
%VLCDS24020-1W%=VLCDS24020-1W.Install,Monitor\VSC6B09 VA930
%VLCDS24020-2W%=VLCDS24020-2W.Install,Monitor\VSC240E VG900b
%VLCDS26105-2W%=VLCDS26105-2W.Install,Monitor\VSC9011 VX900-2
%VLCDS25973-1W%=VLCDS25973-1W.Install,Monitor\VSC0D11 VP191
%VLCDS25973-2W%=VLCDS25973-2W.Install,Monitor\VSC0E11 VP191b
%VLCDS25973-3W%=VLCDS25973-3W.Install,Monitor\VSCB916 VP191s
%VLCDS27384-2W%=VLCDS27384-2W.Install,Monitor\VSC1B12 VT950
%VLCDS27944-4W%=VLCDS27944-4W.Install,Monitor\VSCDB18 VG910b
%VLCDS27944-3W%=VLCDS27944-3W.Install,Monitor\VSCDA18 VG910s
%VLCDS27384-1W%=VLCDS27384-1W.Install,Monitor\VSC8F16 VX950
%VX910%=VX910.Install,Monitor\VSC3C19
%VG900%=VG900.Install,Monitor\VSC1F11
%Q190mb%=Q190mb.Install,Monitor\VSC0B1A
%VP912s%=VP912s.Install,Monitor\VSC651A
%VX924%=VX924.Install,Monitor\VSC0F1C
%VX912%=VX912.Install,Monitor\VSC8D1A
%VP912b%=VP912b.Install,Monitor\VSC661A
%VE902m%=VE902m.Install,Monitor\VSC491B
%VA912%=VA912.Install,Monitor\VSCC71B
%VA912b%=VA912b.Install,Monitor\VSCCF1B
%VE910%=VE910.Install,Monitor\VSCDA1B
%VP191b-2%=VP191b-2.Install,Monitor\VSCD51B
%VP191s-2%=VP191s-2.Install,Monitor\VSCD71B
%VA912-2%=VA912-2.Install,Monitor\VSCF61B
%VG920%=VG920.Install,Monitor\VSC251C
%VTA900%=VTA900.Install,Monitor\VSC0C1C
%VA905%=VA905.Install,Monitor\VSC341C
%VA915%=VA915.Install,Monitor\VSC331C
%VA902%=VA902.Install,Monitor\VSC1B1C
%VA902_Series%=VA902_Series.Install,Monitor\VSC211C VA902_Series
%VE910-3%=VE910-3.Install,Monitor\VSC501C VE910-3/VE910b-3
%VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
%VA912-3%=VA912-3.Install,Monitor\VSC4E1C VA912-3/VA912b-3
%Q9%=Q9.Install,Monitor\VSC6E1C Q9 Series
%VA912-4%=VA912-4.Install,Monitor\VSC721C VA912-4/VA912b-4
%VA1912w%=VA1912w.Install,Monitor\VSC711C VA1912w/VA1912wb
%VX922%=VX922.Install,Monitor\VSCAD1C
%VX912-3%=VX912-3.Install,Monitor\VSCD71C
%VA902-2%=VA902-2.Install,Monitor\VSC981D
%VP920_Series%=VP920_Series.Install,Monitor\VSCB01C
%VA912-5%=VA912-5.Install,Monitor\VSCB71D VA912-5 Series
%VX912-4%=VX912-4.Install,Monitor\VSCD71C
%VA903%=VA903.Install,Monitor\VSC111E
%VE920m%=VE920m.Install,Monitor\VSC031E
%Q9b-2%=Q9b-2.Install,Monitor\VSCC01D
%VA903-2%=VA903-2.Install,Monitor\VSC281E
%VE1920wm%=VE1920wm.Install,Monitor\VSC501E
%VG921m%=VG921m.Install,Monitor\VSC301E
%VX1935wm%=VX1935wm.Install,Monitor\VSC2A1E
%N1900w%=N1900w.Install,Monitor\VSCEA1D
%VA902-3%=VA902-3.Install,Monitor\VSC671E
%VA903-3%=VA903-3.Install,Monitor\VSC701E
%VG1921wm%=VG1921wm.Install,Monitor\VSC5E1E
%VA1912w-2%=VA1912w-2.Install,Monitor\VSC711C
%VG1930wm%=VG1930wm.Install,Monitor\VSC9D1E
%Q19wb%=Q19wb.Install,Monitor\VSCB71E
%VX1935wm-3%=VX1935wm-3.Install,Monitor\VSCB81E
%VX1945wm-3%=VX1945wm-3.Install,Monitor\VSCB91E
%Q9-3%=Q9-3.Install,Monitor\VSCC31E
%VA913%=VA913.Install,Monitor\VSCCE1E
%VG930m-3%=VG930m-3.Install,Monitor\VSC991E
%VA930m%=VA930m.Install,Monitor\VSCFB1E
%VA1930wm%=VA1930wm.Install,Monitor\VSC171F
%Q191wb%=Q191wb.Install,Monitor\VSC4E1F
%Q19wb-2%=Q19wb-2.Install,Monitor\VSC3E1F
%VA1903w%=VA1903w.Install,Monitor\VSC701F
%VX1932wm%=VX1932wm.Install,Monitor\VSCD41F
%VA1930wm-3%=VA1930wm-3.Install,Monitor\VSC0220
%VA1916w%=VA1916w.Install,Monitor\VSCF91F
%VA1926w%=VA1926w.Install,Monitor\VSC5920
%VG1921wm_Series%=VG1921wm.Install,Monitor\VSC0520
%VX1940w%=VX1940w.Install,Monitor\VSC6A20
%VA916%=VA916.Install,Monitor\VSC7C20
%VA926%=VA926.Install,Monitor\VSC7D20
%NX1932w%=NX1932w.Install,Monitor\VSC6020
%VP950B%=VP950B.Install,Monitor\VSCA720
%NX1940w%=NX1940w.Install,Monitor\VSC6D20
%Q191wb-2%=Q191wb-2.Install,Monitor\VSCF220
%VX1962wm%=VX1962wm.Install,Monitor\VSCD920
%Q191WB-3%=Q191WB-3.Install,Monitor\VSC5D21
%Q91b%=Q91b.Install,Monitor\VSC6A21
%N1930w%=N1930w.Install,Monitor\VSC6721

[VLCDS23433-1W.Install] VG191
DelReg=DEL_CURRENT_REG
AddReg=VLCDS23433-1W.AddReg,1280,DPMS
Copyfiles=VLCDS23433-1W.CopyFiles

[VLCDS23433-1W1.Install] VG191b
DelReg=DEL_CURRENT_REG
AddReg=VLCDS23433-1W1.AddReg,1280,DPMS
Copyfiles=VLCDS23433-1W1.CopyFiles

[VLCDS23668-1W.Install] VX900
DelReg=DEL_CURRENT_REG
AddReg=VLCDS23668-1W.AddReg,1280,DPMS
Copyfiles=VLCDS23668-1W.CopyFiles

[VLCDS24020-1W.Install] VA930
DelReg=DEL_CURRENT_REG
AddReg=VLCDS24020-1W.AddReg,1280,DPMS
Copyfiles=VLCDS24020-1W.CopyFiles

[VLCDS24020-2W.Install] VG900b
DelReg=DEL_CURRENT_REG
AddReg=VLCDS24020-2W.AddReg,1280,DPMS
Copyfiles=VLCDS24020-2W.CopyFiles

[VLCDS26105-2W.Install] VX900-2
DelReg=DEL_CURRENT_REG
AddReg=VLCDS26105-2W.AddReg,1280,DPMS
Copyfiles=VLCDS26105-2W.CopyFiles

[VLCDS25973-1W.Install] VP191
DelReg=DEL_CURRENT_REG
AddReg=VLCDS25973-1W.AddReg,1280,DPMS
Copyfiles=VLCDS25973-1W.CopyFiles

[VLCDS25973-2W.Install] VP191b
DelReg=DEL_CURRENT_REG
AddReg=VLCDS25973-2W.AddReg,1280,DPMS
Copyfiles=VLCDS25973-2W.CopyFiles

[VLCDS25973-3W.Install] VP191s
DelReg=DEL_CURRENT_REG
AddReg=VLCDS25973-3W.AddReg,1280,DPMS
Copyfiles=VLCDS25973-3W.CopyFiles

[VLCDS27384-2W.Install] VT950
DelReg=DEL_CURRENT_REG
AddReg=VLCDS27384-2W.AddReg,1280,DPMS
Copyfiles=VLCDS27384-2W.CopyFiles

[VLCDS27944-4W.Install] VG910b
DelReg=DEL_CURRENT_REG
AddReg=VLCDS27944-4W.AddReg,1280,DPMS
Copyfiles=VLCDS27944-4W.CopyFiles

[VLCDS27944-3W.Install] VG910s
DelReg=DEL_CURRENT_REG
AddReg=VLCDS27944-3W.AddReg,1280,DPMS
Copyfiles=VLCDS27944-3W.CopyFiles

[VLCDS27384-1W.Install] VX950
DelReg=DEL_CURRENT_REG
AddReg=VLCDS27384-1W.AddReg,1280,DPMS
Copyfiles=VLCDS27384-1W.CopyFiles

[VX910.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX910.AddReg,1280,DPMS
Copyfiles=VX910.CopyFiles

[VG900.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG900.AddReg,1280,DPMS
Copyfiles=VG900.CopyFiles

[Q190mb.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q190mb.AddReg,1280,DPMS
Copyfiles=Q190mb.CopyFiles

[VP912s.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP912s.AddReg,1280,DPMS
Copyfiles=VP912s.CopyFiles

[VX924.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX924.AddReg,1280,DPMS
Copyfiles=VX924.CopyFiles

[VX912.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX912.AddReg,1280,DPMS
Copyfiles=VX912.CopyFiles

[VP912b.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP912b.AddReg,1280,DPMS
Copyfiles=VP912b.CopyFiles

[VE902m.Install]
DelReg=DEL_CURRENT_REG
AddReg=VE902m.AddReg,1280,DPMS
Copyfiles=VE902m.CopyFiles

[VA912.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA912.AddReg,1280,DPMS
Copyfiles=VA912.CopyFiles

[VA912b.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA912b.AddReg,1280,DPMS
Copyfiles=VA912b.CopyFiles

[VE910.Install]
DelReg=DEL_CURRENT_REG
AddReg=VE910.AddReg,1280,DPMS
Copyfiles=VE910.CopyFiles

[VP191b-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP191b-2.AddReg,1280,DPMS
Copyfiles=VP191b-2.CopyFiles

[VP191s-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP191s-2.AddReg,1280,DPMS
Copyfiles=VP191s-2.CopyFiles

[VA912-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA912-2.AddReg,1280,DPMS
Copyfiles=VA912-2.CopyFiles

[VG920.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG920.AddReg,1280,DPMS
Copyfiles=VG920.CopyFiles

[VTA900.Install]
DelReg=DEL_CURRENT_REG
AddReg=VTA900.AddReg,1280,DPMS
Copyfiles=VTA900.CopyFiles

[VA905.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA905.AddReg,1280,DPMS
Copyfiles=VA905.CopyFiles

[VA915.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA915.AddReg,1280,DPMS
Copyfiles=VA915.CopyFiles

[VA902.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA902.AddReg,1280,DPMS
Copyfiles=VA902.CopyFiles

[VA902_Series.Install] VA902_Series
DelReg=DEL_CURRENT_REG
AddReg=VA902_Series.AddReg,1280,DPMS
Copyfiles=VA902_Series.CopyFiles

[VE910-3.Install] VE910-3/VE910b-3
DelReg=DEL_CURRENT_REG
AddReg=VE910-3.AddReg,1280,DPMS
Copyfiles=VE910-3.CopyFiles

[VP930_Series.Install] VP930_Series
DelReg=DEL_CURRENT_REG
AddReg=VP930_Series.AddReg,1280,DPMS
Copyfiles=VP930_Series.CopyFiles

[VA912-3.Install] VA912-3/VA912b-3
DelReg=DEL_CURRENT_REG
AddReg=VA912-3.AddReg,1280,DPMS
Copyfiles=VA912-3.CopyFiles

[Q9.Install] Q9 Series
DelReg=DEL_CURRENT_REG
AddReg=Q9.AddReg,1280,DPMS
Copyfiles=Q9.CopyFiles

[VA912-4.Install] VA912-4/VA912b-4
DelReg=DEL_CURRENT_REG
AddReg=VA912-4.AddReg,1280,DPMS
Copyfiles=VA912-4.CopyFiles

[VA1912w.Install] VA1912w/VA1912wb
DelReg=DEL_CURRENT_REG
AddReg=VA1912w.AddReg,1440,DPMS
Copyfiles=VA1912w.CopyFiles

[VX922.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX922.AddReg,1280,DPMS
Copyfiles=VX922.CopyFiles

[VX912-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX912-3.AddReg,1280,DPMS
Copyfiles=VX912-3.CopyFiles

[VA902-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA902-2.AddReg,1280,DPMS
Copyfiles=VA902-2.CopyFiles

[VP920_Series.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP920_Series.AddReg,1280,DPMS
Copyfiles=VP920_Series.CopyFiles

[VA912-5.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA912-5.AddReg,1280,DPMS
Copyfiles=VA912-5.CopyFiles

[VX912-4.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX912-4.AddReg,1280,DPMS
Copyfiles=VX912-4.CopyFiles

[VA903.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA903.AddReg,1280,DPMS
Copyfiles=VA903.CopyFiles

[VE920m.Install]
DelReg=DEL_CURRENT_REG
AddReg=VE920m.AddReg,1280,DPMS
Copyfiles=VE920m.CopyFiles

[Q9b-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q9b-2.AddReg,1280,DPMS
Copyfiles=Q9b-2.CopyFiles

[VA903-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA903-2.AddReg,1280,DPMS
Copyfiles=VA903-2.CopyFiles

[VE1920wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VE1920wm.AddReg,1440,DPMS
Copyfiles=VE1920wm.CopyFiles

[VG921m.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG921m.AddReg,1280,DPMS
Copyfiles=VG921m.CopyFiles

[VX1935wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1935wm.AddReg,1440,DPMS
Copyfiles=VX1935wm.CopyFiles

[N1900w.Install]
DelReg=DEL_CURRENT_REG
AddReg=N1900w.AddReg,1440,DPMS
Copyfiles=N1900w.CopyFiles

[VA902-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA902-3.AddReg,1280,DPMS
Copyfiles=VA902-3.CopyFiles

[VA903-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA903-3.AddReg,1280,DPMS
Copyfiles=VA903-3.CopyFiles

[VG1921wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG1921wm.AddReg,1440,DPMS
Copyfiles=VG1921wm.CopyFiles

[VA1912w-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1912w-2.AddReg,1440,DPMS
Copyfiles=VA1912w-2.CopyFiles

[VG1930wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG1930wm.AddReg,1440,DPMS
Copyfiles=VG1930wm.CopyFiles

[Q19wb.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q19wb.AddReg,1440,DPMS
Copyfiles=Q19wb.CopyFiles

[VX1935wm-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1935wm-3.AddReg,1440,DPMS
Copyfiles=VX1935wm-3.CopyFiles

[VX1945wm-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1945wm-3.AddReg,1440,DPMS
Copyfiles=VX1945wm-3.CopyFiles

[Q9-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q9-3.AddReg,1280,DPMS
Copyfiles=Q9-3.CopyFiles

[VA913.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA913.AddReg,1280,DPMS
Copyfiles=VA913.CopyFiles

[VG930m-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VG930m-3.AddReg,1280,DPMS
Copyfiles=VG930m-3.CopyFiles

[VA930m.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA930m.AddReg,1280,DPMS
Copyfiles=VA930m.CopyFiles

[VA1930wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1930wm.AddReg,1440,DPMS
Copyfiles=VA1930wm.CopyFiles

[Q191wb.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q191wb.AddReg,1440,DPMS
Copyfiles=Q191wb.CopyFiles

[Q19wb-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q19wb-2.AddReg,1440,DPMS
Copyfiles=Q19wb-2.CopyFiles

[VA1903w.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1903w.AddReg,1440,DPMS
Copyfiles=VA1903w.CopyFiles

[VX1932wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1932wm.AddReg,1440,DPMS
Copyfiles=VX1932wm.CopyFiles

[VA1930wm-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1930wm-3.AddReg,1440,DPMS
Copyfiles=VA1930wm-3.CopyFiles

[VA1916w.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1916w.AddReg,1440,DPMS
Copyfiles=VA1916w.CopyFiles

[VA1926w.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA1926w.AddReg,1440,DPMS
Copyfiles=VA1926w.CopyFiles

[VX1940w.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1940w.AddReg,1680,DPMS
Copyfiles=VX1940w.CopyFiles

[VA916.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA916.AddReg,1280,DPMS
Copyfiles=VA916.CopyFiles

[VA926.Install]
DelReg=DEL_CURRENT_REG
AddReg=VA926.AddReg,1280,DPMS
Copyfiles=VA926.CopyFiles

[NX1932w.Install]
DelReg=DEL_CURRENT_REG
AddReg=NX1932w.AddReg,1440,DPMS
Copyfiles=NX1932w.CopyFiles

[VP950B.Install]
DelReg=DEL_CURRENT_REG
AddReg=VP950B.AddReg,1280,DPMS
Copyfiles=VP950B.CopyFiles

[NX1940w.Install]
DelReg=DEL_CURRENT_REG
AddReg=NX1940w.AddReg,1440,DPMS
Copyfiles=NX1940w.CopyFiles

[Q191wb-2.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q191wb-2.AddReg,1440,DPMS
Copyfiles=Q191wb-2.CopyFiles

[VX1962wm.Install]
DelReg=DEL_CURRENT_REG
AddReg=VX1962wm.AddReg,1680,DPMS
Copyfiles=VX1962wm.CopyFiles

[Q191WB-3.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q191WB-3.AddReg,1440,DPMS
Copyfiles=Q191WB-3.CopyFiles

[Q91b.Install]
DelReg=DEL_CURRENT_REG
AddReg=Q91b.AddReg,1280,DPMS
Copyfiles=Q91b.CopyFiles

[N1930w.Install]
DelReg=DEL_CURRENT_REG
AddReg=N1930w.AddReg,1440,DPMS
Copyfiles=N1930w.CopyFiles

[DEL_CURRENT_REG]
HKR,MODES
HKR,,MaxResolution
HKR,,DPMS
HKR,,ICMProfile

[1280]
HKR,,MaxResolution,,"1280,1024"
[1440]
HKR,,MaxResolution,,"1440,900"
[1680]
HKR,,MaxResolution,,"1680,1050"

[DPMS]
HKR,,DPMS,,1

[VLCDS23433-1W.AddReg] VG191
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG191.ICM"

[VLCDS23433-1W1.AddReg] VG191b
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG191b.ICM"

[VLCDS23668-1W.AddReg] VX900
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX900.ICM"

[VLCDS24020-1W.AddReg] VA930
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VA930.ICM"

[VLCDS24020-2W.AddReg] VG900b
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG900b.ICM"

[VLCDS26105-2W.AddReg] VX900-2
HKR,"MODES\1280,1024",Mode1,,"30-83,50-75,+,+"
HKR,,ICMProfile,0,"VX900-2.ICM"

[VLCDS25973-1W.AddReg] VP191
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP191.ICM"

[VLCDS25973-2W.AddReg] VP191b
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP191b.ICM"

[VLCDS25973-3W.AddReg] VP191s
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VP191s.ICM"

[VLCDS27384-2W.AddReg] VT950
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VT950.ICM"

[VLCDS27944-4W.AddReg] VG910b
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG910b.ICM"

[VLCDS27944-3W.AddReg] VG910s
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG910s.ICM"

[VLCDS27384-1W.AddReg] VX950
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX950.ICM"

[VX910.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VX910.ICM"

[VG900.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG900.ICM"

[Q190mb.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-75,+,+"
HKR,,ICMProfile,0,"Q190mb.ICM"

[VP912s.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VP912s.ICM"

[VX924.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX924.ICM"

[VX912.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VX912.ICM"

[VP912b.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VP912b.ICM"

[VE902m.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,56-76,+,+"
HKR,,ICMProfile,0,"VE902m.ICM"

[VA912.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912.ICM"

[VA912b.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912b.ICM"

[VE910.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VE910.ICM"

[VP191b-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP191b-2.ICM"

[VP191s-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP191s-2.ICM"

[VA912-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912-2.ICM"

[VG920.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG920.ICM"

[VTA900.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VTA900.ICM"

[VA905.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-75,+,+"
HKR,,ICMProfile,0,"VA905.ICM"

[VA915.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA915.ICM"

[VA902.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA902.ICM"

[VA902_Series.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+" VA902_Series
HKR,,ICMProfile,0,"VA902_Series.ICM"

[VE910-3.AddReg] VE910-3/VE910b-3
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VE910-3.ICM"

[VP930_Series.AddReg] VP930_Series
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP930_Series.ICM"

[VA912-3.AddReg] VA912-3/VA912b-3
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912-3.ICM"

[Q9.AddReg] Q9 Series
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"Q9_SERIES.ICM"

[VA912-4.AddReg] VA912-4/VA912b-4
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912-4SERIES.ICM"

[VA1912w.AddReg] VA1912w/VA1912wb
HKR,"MODES\1440,900",Mode1,,"30-82,50-85,-,+"
HKR,,ICMProfile,0,"VA1912wSERIES.ICM"

[VX922.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX922.ICM"

[VX912-3.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX912-3.ICM"

[VA902-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA902-2_SERIES.ICM"

[VP920_Series.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VP920_Series.ICM"

[VA912-5.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA912-5_SERIES.ICM"

[VX912-4.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VX912-4.ICM"

[VA903.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA903_SERIES.ICM"

[VE920m.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VE920m.ICM"

[Q9b-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,55-75,+,+"
HKR,,ICMProfile,0,"Q9b-2.ICM"

[VA903-2.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA903-2_SERIES.ICM"

[VE1920wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-85,-,+"
HKR,,ICMProfile,0,"VE1920wm_SERIES.ICM"

[VG921m.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG921m.ICM"

[VX1935wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-85,-,+"
HKR,,ICMProfile,0,"VX1935wm.ICM"

[N1900w.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"N1900w.ICM"

[VA902-3.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-85,+,+"
HKR,,ICMProfile,0,"VA902-3_SERIES.ICM"

[VA903-3.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-85,+,+"
HKR,,ICMProfile,0,"VA903-3_SERIES.ICM"

[VG1921wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VG1921wm_SERIES.ICM"

[VA1912w-2.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-85,-,+"
HKR,,ICMProfile,0,"VA1912w-2_SERIES.ICM"

[VG1930wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VG1930wm.ICM"

[Q19wb.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,56-75,-,+"
HKR,,ICMProfile,0,"Q19wb.ICM"

[VX1935wm-3.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VX1935wm-3.ICM"

[VX1945wm-3.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VX1945wm-3.ICM"

[Q9-3.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"Q9-3.ICM"

[VA913.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-85,+,+"
HKR,,ICMProfile,0,"VA913.ICM"

[VG930m-3.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
HKR,,ICMProfile,0,"VG930m-3.ICM"

[VA930m.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-82,56-75,+,+"
HKR,,ICMProfile,0,"VA930m.ICM"

[VA1930wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VA1930wm.ICM"

[Q191wb.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,56-75,-,+"
HKR,,ICMProfile,0,"Q191wb.ICM"

[Q19wb-2.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,56-75,-,+"
HKR,,ICMProfile,0,"Q19wb-2.ICM"

[VA1903w.AddReg]
HKR,"MODES\1440,900",Mode1,,"24-82,50-75,-,+"
HKR,,ICMProfile,0,"VA1903w_SERIES.ICM"

[VX1932wm.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VX1932wm.ICM"

[VA1930wm-3.AddReg]
HKR,"MODES\1440,900",Mode1,,"24-82,50-75,-,+"
HKR,,ICMProfile,0,"VA1930wm-3.ICM"

[VA1916w.AddReg]
HKR,"MODES\1440,900",Mode1,,"24-82,50-75,-,+"
HKR,,ICMProfile,0,"VA1916w_SERIES.ICM"

[VA1926w.AddReg]
HKR,"MODES\1440,900",Mode1,,"24-82,50-75,-,+"
HKR,,ICMProfile,0,"VA1926w_SERIES.ICM"

[VX1940w.AddReg]
HKR,"MODES\1680,1050",Mode1,,"24-82,50-75,-,+"
HKR,,ICMProfile,0,"VX1940w.ICM"

[VA916.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-75,+,+"
HKR,,ICMProfile,0,"VA916_SERIES.icm"

[VA926.AddReg]
HKR,"MODES\1280,1024",Mode1,,"30-80,50-75,+,+"
HKR,,ICMProfile,0,"VA926_SERIES.icm"

[NX1932w.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"NX1932w.ICM"

[VP950B.AddReg]
HKR,"MODES\1280,1024",Mode1,,"24-82,50-85,+,+"
HKR,,ICMProfile,0,"VP950B.ICM"

[NX1940w.AddReg]
HKR,"MODES\1440,900",Mode1,,"31-80,60-75,-,+"
HKR,,ICMProfile,0,"NX1940w.ICM"

[Q191wb-2.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,56-75,-,+"
HKR,,ICMProfile,0,"Q191wb-2.ICM"

[VX1962wm.AddReg]
HKR,"MODES\1680,1050",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"VX1962wm_SERIES.ICM"

[Q191WB-3.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-65,55-75,-,+"
HKR,,ICMProfile,0,"Q191WB-3.ICM"

[Q91b.AddReg]
HKR,"MODES\1280,1024",Mode1,,"31-80,55-75,+,+"
HKR,,ICMProfile,0,"Q91b.ICM"

[N1930w.AddReg]
HKR,"MODES\1440,900",Mode1,,"30-82,50-75,-,+"
HKR,,ICMProfile,0,"N1930w.ICM"

[VLCDS23433-1W.CopyFiles]
VG191.ICM

[VLCDS23433-1W1.CopyFiles]
VG191b.ICM

[VLCDS23668-1W.CopyFiles]
VX900.ICM

[VLCDS24020-1W.CopyFiles]
VA930.ICM

[VLCDS24020-2W.CopyFiles]
VG900b.ICM

[VLCDS26105-2W.CopyFiles]
VX900-2.ICM

[VLCDS25973-1W.CopyFiles]
VP191.ICM

[VLCDS25973-2W.CopyFiles]
VP191b.ICM

[VLCDS25973-3W.CopyFiles]
VP191s.ICM

[VLCDS27384-2W.CopyFiles]
VT950.ICM

[VLCDS27944-4W.CopyFiles]
VG910b.ICM

[VLCDS27944-3W.CopyFiles]
VG910s.ICM

[VLCDS27384-1W.CopyFiles]
VX950.ICM

[VX910.CopyFiles]
VX910.ICM

[VG900.CopyFiles]
VG900.ICM

[Q190mb.CopyFiles]
Q190mb.ICM

[VP912s.CopyFiles]
VP912s.ICM

[VX924.CopyFiles]
VX924.ICM

[VX912.CopyFiles]
VX912.ICM

[VP912b.CopyFiles]
VP912b.ICM

[VE902m.CopyFiles]
VE902m.ICM

[VA912.CopyFiles]
VA912.ICM

[VA912b.CopyFiles]
VA912b.ICM

[VE910.CopyFiles]
VE910.ICM

[VP191b-2.CopyFiles]
VP191b-2.ICM

[VP191s-2.CopyFiles]
VP191s-2.ICM

[VA912-2.CopyFiles]
VA912-2.ICM

[VG920.CopyFiles]
VG920.ICM

[VTA900.CopyFiles]
VTA900.ICM

[VA905.CopyFiles]
VA905.ICM

[VA915.CopyFiles]
VA915.ICM

[VA902.CopyFiles]
VA902.ICM

[VA902_Series.CopyFiles]
VA902_Series.ICM

[VE910-3.CopyFiles]
VE910-3.ICM

[VP930_Series.CopyFiles]
VP930_Series.ICM

[VA912-3.CopyFiles]
VA912-3.ICM

[Q9.CopyFiles]
Q9_SERIES.ICM

[VA912-4.CopyFiles]
VA912-4SERIES.ICM

[VA1912w.CopyFiles]
VA1912wSERIES.ICM

[VX922.CopyFiles]
VX922.ICM

[VX912-3.CopyFiles]
VX912-3.ICM

[VA902-2.CopyFiles]
VA902-2_SERIES.ICM

[VP920_Series.CopyFiles]
VP920_Series.ICM

[VA912-5.CopyFiles]
VA912-5_SERIES.ICM

[VX912-4.CopyFiles]
VX912-4.ICM

[VA903.CopyFiles]
VA903_SERIES.ICM

[VE920m.CopyFiles]
VE920m.ICM

[Q9b-2.CopyFiles]
Q9b-2.ICM

[VA903-2.CopyFiles]
VA903-2_SERIES.ICM

[VE1920wm.CopyFiles]
VE1920wm_SERIES.ICM

[VG921m.CopyFiles]
VG921m.ICM

[VX1935wm.CopyFiles]
VX1935wm.ICM

[N1900w.CopyFiles]
N1900w.ICM

[VA902-3.CopyFiles]
VA902-3_SERIES.ICM

[VA903-3.CopyFiles]
VA903-3_SERIES.ICM

[VG1921wm.CopyFiles]
VG1921wm_SERIES.ICM

[VA1912w-2.CopyFiles]
VA1912w-2_SERIES.ICM

[VG1930wm.CopyFiles]
VG1930wm.ICM

[Q19wb.CopyFiles]
Q19wb.ICM

[VX1935wm-3.CopyFiles]
VX1935wm-3.ICM

[VX1945wm-3.CopyFiles]
VX1945wm-3.ICM

[Q9-3.CopyFiles]
Q9-3.ICM

[VA913.CopyFiles]
VA913.ICM

[VG930m-3.CopyFiles]
VG930m-3.ICM

[VA930m.CopyFiles]
VA930m.ICM

[VA1930wm.CopyFiles]
VA1930wm.ICM

[Q191wb.CopyFiles]
Q191wb.ICM

[Q19wb-2.CopyFiles]
Q19wb-2.ICM

[VA1903w.CopyFiles]
VA1903w_SERIES.ICM

[VX1932wm.CopyFiles]
VX1932wm.ICM

[VA1930wm-3.CopyFiles]
VA1930wm-3.ICM

[VA1916w.CopyFiles]
VA1916w_SERIES.ICM

[VA1926w.CopyFiles]
VA1926w_SERIES.ICM

[VX1940w.CopyFiles]
VX1940w.ICM

[VA916.CopyFiles]
VA916_SERIES.icm

[VA926.CopyFiles]
VA926_SERIES.icm

[NX1932w.CopyFiles]
NX1932w.ICM

[VP950B.CopyFiles]
VP950B.ICM

[NX1940w.CopyFiles]
NX1940w.ICM

[Q191wb-2.CopyFiles]
Q191wb-2.ICM

[VX1962wm.CopyFiles]
VX1962wm_SERIES.ICM

[Q191WB-3.CopyFiles]
Q191WB-3.ICM

[Q91b.CopyFiles]
Q91b.ICM

[N1930w.CopyFiles]
N1930w.ICM

[Strings]
ViewSonic="ViewSonic"
DiskLabel="ViewSonic Wizard"

VLCDS23433-1W="ViewSonic VG191"
VLCDS23433-1W1="ViewSonic VG191b"
VLCDS23668-1W="ViewSonic VX900"
VLCDS24020-1W="ViewSonic VA930"
VLCDS24020-2W="ViewSonic VG900b"
VLCDS26105-2W="ViewSonic VX900-2"
VLCDS25973-1W="ViewSonic VP191"
VLCDS25973-2W="ViewSonic VP191b"
VLCDS25973-3W="ViewSonic VP191s"
VLCDS27384-2W="ViewSonic VT950"
VLCDS27944-4W="ViewSonic VG910b"
VLCDS27944-3W="ViewSonic VG910s"
VLCDS27384-1W="ViewSonic VX950"
VX910="ViewSonic VX910"
VG900="ViewSonic VG900"
Q190mb="ViewSonic Q190mb"
VP912s="ViewSonic VP912s"
VX924="ViewSonic VX924"
VX912="ViewSonic VX912"
VP912b="ViewSonic VP912b"
VE902m="ViewSonic VE902m"
VA912="ViewSonic VA912"
VA912b="ViewSonic VA912b"
VE910="ViewSonic VE910/VE910b"
VP191b-2="ViewSonic VP191b-2"
VP191s-2="ViewSonic VP191s-2"
VA912-2="ViewSonic VA912-2"
VG920="ViewSonic VG920"
VTA900="ViewSonic VTA900"
VA905="ViewSonic VA905"
VA915="ViewSonic VA915"
VA902="ViewSonic VA902"
VA902_Series="ViewSonic VA902 Series"
VE910-3="ViewSonic VE910-3/VE910b-3"
VP930_Series="ViewSonic VP930 Series"
VA912-3="ViewSonic VA912-3"
Q9="ViewSonic Q9 Series"
VA912-4="ViewSonic VA912-4 Series"
VA1912w="ViewSonic VA1912w Series"
VX922="ViewSonic VX922"
VX912-3="ViewSonic VX912-3"
VA902-2="ViewSonic VA902-2 Series"
VP920_Series="ViewSonic VP920 Series"
VA912-5="ViewSonic VA912-5 Series"
VX912-4="ViewSonic VX912-4"
VA903="ViewSonic VA903 Series"
VE920m="ViewSonic VE920m"
Q9b-2="ViewSonic Q9-2 Series"
VA903-2="ViewSonic VA903-2 Series"
VE1920wm="ViewSonic VE1920wm Series"
VG921m="ViewSonic VG921m Series"
VX1935wm="ViewSonic VX1935wm"
N1900w="ViewSonic N1900w"
VA902-3="ViewSonic VA902-3 Series"
VA903-3="ViewSonic VA903-3 Series"
VG1921wm="ViewSonic VG1921wm-3"
VA1912w-2="ViewSonic VA1912w-2 Series"
VG1930wm="ViewSonic VG1930wm"
Q19wb="ViewSonic Q19wb"
VX1935wm-3="ViewSonic VX1935wm Series"
VX1945wm-3="ViewSonic VX1945wm-3"
Q9-3="ViewSonic Q9-3"
VA913="ViewSonic VA913b"
VG930m-3="ViewSonic VG930m-3"
VA930m="ViewSonic VA930m"
VA1930wm="ViewSonic VA1930wm"
Q191wb="ViewSonic Q191wb"
Q19wb-2="ViewSonic Q19wb-2"
VA1903w="ViewSonic VA1903w Series"
VX1932wm="ViewSonic VX1932wm"
VA1930wm-3="ViewSonic VA1930wm-3"
VA1916w="ViewSonic VA1916w Series"
VA1926w="ViewSonic VA1926w Series"
VG1921wm_Series="ViewSonic VG1921wm Series"
VX1940w="ViewSonic VX1940w"
VA916="ViewSonic VA916 Series"
VA926="ViewSonic VA926 Series"
NX1932w="ViewSonic NX1932w"
VP950B="ViewSonic VP950B Series"
NX1940w="ViewSonic NX1940w"
Q191wb-2="ViewSonic Q191wb-2"
VX1962wm="ViewSonic VX1962wm Series"
Q191WB-3="ViewSonic Q191wb-3"
Q91b="ViewSonic Q91b"
N1930w="ViewSonic N1930w"

> | Default Monitor
> | Monitor
> | This device is disabled.
> | Registry Key:
> |
> HKEY_LOCAL_MACHINE\enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SU
> BSYS
> | _280117EE&REV_01_000800_1
> | Alloc resources: None
> | Forced resources: None
> | Boot resources: None
> | Filtered resources: None
> | Basic resources: None
> | Driver: Monitor\0002
> | Driver Date: 4-23-1999
>
> The above doesn't look especially bad-- except it is unwanted!
>
> | "PCR" <pcrrcp@netzero.net> wrote in message
> | news:OQHtEg2cIHA.748@TK2MSFTNGP04.phx.gbl...
> |> Warren wrote:
> |> | That's what I was looking for, but I couldn't remember. I've seen
> |> | technicians clear all devices and let the system rebuild from
> |> | scratch.
> |> |
> |> | There were a lot of Plug & Play entries in Safe Mode view of Device
> |> | Manager that were cleaned up but unfortuately that Default monitor
> |> | is still being redetected.
> |>
> |> Hmm. Too bad the unknown monitor wouldn't go too.
> |>
> |> (a) You have both a Default Monitor & a Viewsonic LCD showing
> |> up under the Monitors branch in Device Manager?
> |> (b) Did you remove them both before rebooting as instructed?
> |> (c) What is highlighted in step 3d of my prior instructions for
> |> each of them, when you "Show all hardware"?
> |>
> |> I installed an LCD Envision EN5400e monitor myself, & all looks &
> |> works fine, except at...
> |>
> |> "START button, Run, MSInfo32, Components, Display"
> |>
> |> Envision EN5400e
> |> Monitor
> |> Registry Key:
> |>
> HKEY_LOCAL_MACHINE\enum\MONITOR\EPIE564\PCI_VEN_1023&DEV_8400&SUBSYS_B1A
> |> B0E11&REV_5C_000800
> |> Alloc resources: None
> |> Forced resources: None
> |> Boot resources: None
> |> Filtered resources: None
> |> Basic resources: None
> |> Driver: Monitor\0000
> |> Driver Date: 8-20-2004
> |> Driver: EN5400e.icm
> |> File Size: Driver Not Installed
> |> File Date: Driver Not Installed
> |>
> |> Use the mouse to highlight the monitor info & the Edit menu to copy &
> |> post it. Are you seeing two monitors there, instead of just one?
> |>
> |> | Perhaps the Display Adapter is the problem, maybe it remembers it
> |> | has two monitors ? Should I remove it in the Device Manager
> |> | first, and let the system rebuild before trying to remove the
> |> | Default monitor ?
> |>
> |> It could be worth a try. Important: At the point below where you
> |> "bolt 'Show all hardware'", ensure you copy down what is in the left
> |> & right panes. Then, if you have no other way to get back your
> |> current display adapter, you may go back into that screen to select
> |> it.
> |>
> |> ......Quote..........
> |> The first thing to do is to remove the video adapter you have
> |> installed. Right-click on the desktop choose "Properties" from the
> |> drop-down menu select "Settings" click on the "Advanced" button
> |> and click on "Adapter". An adapter is a program that tells Windows
> |> how to deal with a specific video card. Make note of the adapter
> |> that is currently installed. Then, change the adapter to "Standard
> |> Display Adapter (VGA)" and restart the system.
> |>
> |> [That is: Click "Change button, Next, bolt 'Display a List...',
> |> Next, bolt 'Show all hardware', scroll left pane to top, select
> |> '(Standard display types)', select 'Standard Display Adapter (VGA)'
> |> in right pane, click 'Next'"... PCR]
> |>
> |> This will remove the current adapter and replace it with a generic
> |> VGA adapter that works with all video cards. You will not like VGA
> |> because it supports only 16 colors, but the purpose of installing it
> |> is to get rid of whatever was there before.
> |>
> |> Next, return to the adapter screen and install an adapter that
> |> matches your video card. This may or may not be the adapter that
> |> you are using now. Examine the materials you received with your
> |> computer to see if they include a CD-ROM or floppy disk that
> |> contains the correct video adapter. Or go to the Gateway website and
> |> see if they have an adapter for you to download. Or check the
> |> website of the company that made your video card.
> |>
> |> Bill Starbuck (MVP)
> |> ......End....of quote....
> |>
> |> | "PCR" <pcrrcp@netzero.net> wrote in message
> |> | news:uyZf0CpcIHA.6080@TK2MSFTNGP05.phx.gbl...
> |> |> Warren wrote:
> |> |> | I had trouble getting the right drivers installed for my
> |> |> | Viewsonic LCD. Essentially I ended up booting up the machine
> |> |> | with no drivers and Windows installed a Default Monitor. After
> |> |> | finally getting the correct drivers installed on my computer
> |> |> | the correct drivers where installed but the computer still
> |> |> | thinks there's an unknown monitor attached to the machine and
> |> |> | keeps recreating the Default Monitor at start-up.
> |> |> |
> |> |> | How do I fix this false detection of an unknown monitor ?
> |> |>
> |> |> (1) Boot to Safe Mode
> |> |> (Hold F5 as you boot or CTRL for the Startup Menu)
> |> |> (2) "START, Settings, Control Panel, System, Device Manager tab"
> |> |> (3) Open the Monitors branch, & Remove all entries.
> |> |>
> |> |> Perhaps, FIRST, even in Normal Mode, note what is
> |> |> currently installed. That is...
> |> |> (a) D-Clk the monitor there for Properties, Driver tab.
> |> |> (b) Click the Update Driver button, then "Next".
> |> |> (c) Bolt "Display a list...", & click "Next".
> |> |> (d) Bolt "Show all hardware".
> |> |> Examine the two panes to see what is currently
> |> |> installed. That is likely what you wish to end up
> |> |> with, after step (4).
> |> |>
> |> |> (4) Boot to Normal Mode.
> |> |>
> |> |> Hopefully, the correct monitor will be rediscovered & installed &
> |> |> the other will be gone.
> |> |>
> |> |>
> |> |> --
> |> |> Thanks or Good Luck,
> |> |> There may be humor in this post, and,
> |> |> Naturally, you will not sue,
> |> |> Should things get worse after this,
> |> |> PCR
> |> |> pcrrcp@netzero.net
> |>
> |> --
> |> Thanks or Good Luck,
> |> There may be humor in this post, and,
> |> Naturally, you will not sue,
> |> Should things get worse after this,
> |> PCR
> |> pcrrcp@netzero.net
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp@netzero.net
>
>

PCR · Feb 22, 2008

Warren wrote:
| !!!Please see comments below
|
| "PCR" <pcrrcp@netzero.net> wrote in message
| news:u2ynvpDdIHA.2404@TK2MSFTNGP05.phx.gbl...
|> Warren wrote:
|> | (a) Yes both monitors show up under the Monitors branch
|> |
|> | (b) Yes, I removed them both before rebooting
|>
|> Yea. That was right.
|>
|> Looking below, I see the Default Monitor has the notation: "This
|> device is disabled". Was it like that before you attempted to remove
|> them both in Safe Mode? Or did you disable it afterwards per
|> Richards's instruction? Can it be it needs to be enabled before it
|> can be removed? I might try that...
|
| !!!Yes Default Monitor was enabled when I removed it.

Alright, then. That was all done right. I still am studying the stuff
you posted earlier. I see nothing especially wrong yet, except for the
gobbledygook in your Update Driver requestor & the fact this Default
Monitor won't go.

Have you tried deleting just the Default Monitor in the Registry...?...

HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR

(a) "START button, Run, RegEdit".
(b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
(c) Click the plus sign left of "Enum".
(d) Click the plus sign left of "MONITOR"
(e) Click "DEFAULT_MONITOR" in the left pane.
(f) Select "Export Registry File" in the "Registry" menu.

Have it create a ".reg" file. It will contain all the information
of the Default Monitor. This can be used to restore it, if the
need may arise.

(g) R-Clk "DEFAULT_MONITOR" in the left pane, & select
to delete it.

Reboot-- are you rid of it?

By default, when a ".reg" is clicked, it will Merge into the Registry.
To alter the default behavior...

(a) "START button, Settings, Folder Options, File Types tab".
(b) Scroll to & click (highlight) "Registration Entries".
(c) Click the "Edit" button.
(d) Select (highlight) "Edit" in the window.
(e) Click the "Set Default" button.

Now, when you click a ".reg" file, it will open in Notepad for
examination. To merge it into the Registry, R-Clk it & select "Merge".

....snip

Brian A. · Feb 22, 2008

"Warren" <nospam@nospam.com> wrote in message
news:%235fmYYEdIHA.4144@TK2MSFTNGP05.phx.gbl...
<snipped>
>>
>> (a) "START button, Find, F/F"
>> (b) Leave "Named" empty.
>> (c) In "Containing text", enter... "ViewSonic VP930 Series"
>> with the quotes.
>> (d) In "Look in", browse to... "C:\WINDOWS\INF".
>
> !!!Nothing found searching for text "VSCE41B"
> !!!VS080114_I19.inf found searching for text "ViewSonic VP930 Series".
>
<snipped>

Right click MyComputer.
Click "Properties" in the popup menu.
Click the "Device Manager" tab.
Expand "Monitors".
Double click on the "Default Monitor" device listed to open its properties.
Click the "Driver" tab > "Update Driver" button.
Click "Next".
Select "Display a list of all drivers in a specific location,......" and click
"Next".
Click the "Have Disk" Button.
Click the "Browse" button and navigate to the Directory\Folder\VS080114_I19.inf file
you found earlier.
Select the VS080114_I19.inf file in the Left pane and click Ok > Ok > Next.
Follow the prompts to finish installing the driver.

--

Brian A. Sesko { MS MVP_Windows Desktop User Experience }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375

Warren · Feb 22, 2008

Brian,

Unfortunately when I search for a file"VS080114_I19.inf" it cannot be found
on my hard drive. I think I successfuly converted to a Viewsonic monitor by
pointing to "%VCDTS21367-1%" , the driver being used for my VP930b monitor
but I still end up with two monitors, which I don't want.

"Brian A." <gonefish'n@afarawaylake> wrote in message
news:%23wP%23hBcdIHA.4172@TK2MSFTNGP02.phx.gbl...
> "Warren" <nospam@nospam.com> wrote in message
> news:%235fmYYEdIHA.4144@TK2MSFTNGP05.phx.gbl...
> <snipped>
> >>
> >> (a) "START button, Find, F/F"
> >> (b) Leave "Named" empty.
> >> (c) In "Containing text", enter... "ViewSonic VP930 Series"
> >> with the quotes.
> >> (d) In "Look in", browse to... "C:\WINDOWS\INF".
> >
> > !!!Nothing found searching for text "VSCE41B"
> > !!!VS080114_I19.inf found searching for text "ViewSonic VP930 Series".
> >
> <snipped>
>
> Right click MyComputer.
> Click "Properties" in the popup menu.
> Click the "Device Manager" tab.
> Expand "Monitors".
> Double click on the "Default Monitor" device listed to open its
properties.
> Click the "Driver" tab > "Update Driver" button.
> Click "Next".
> Select "Display a list of all drivers in a specific location,......" and
click
> "Next".
> Click the "Have Disk" Button.
> Click the "Browse" button and navigate to the
Directory\Folder\VS080114_I19.inf file
> you found earlier.
> Select the VS080114_I19.inf file in the Left pane and click Ok > Ok >
Next.
> Follow the prompts to finish installing the driver.
>
>
> --
>
>
> Brian A. Sesko { MS MVP_Windows Desktop User Experience }
> Conflicts start where information lacks.
> http://basconotw.mvps.org/
>
> Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
> How to ask a question: http://support.microsoft.com/kb/555375
>
>

PCR · Feb 22, 2008

Warren wrote:
| !!!Please see comments below
|
| "PCR" <pcrrcp@netzero.net> wrote in message
| news:u2ynvpDdIHA.2404@TK2MSFTNGP05.phx.gbl...
|> Warren wrote:

You did everything right in Safe Mode to try & remove the Default
Monitor. I posted separately how to try it directly in the Registry.

....snip
|> | (c) Default monitor - Generic Television
|>
|> If I were to select "(Standard monitor types)" in the left
|> (Manufacturers) pane, then (among others), I am offered "Generic
|> Television" in the right (Models) pane. So, that almost sounds
|> right-- IF you wanted it.
|
| !!!Yes, "Standard monitor types was in left window" and "Generic
| Television" in the right window

OK. That is as it should be in the Update Driver screen. But we don't
want it also showing up in Device Manager.

|> | VP930 monitor - %VCDTS21367-1% (I have no idea what this
|> | garbage is but the seemingly more appropriate driver for VP 930
|> | Series seems to be available)
|>
|> That doesn't sound exactly right. At that screen...
|>
|> "Device Manager, Monitors branch, D-Clk 'Envision EN5400e', Driver
|> tab, Update Driver button, Next, bolt 'Display a list...", Next,
|> bolt 'Show all hardware"
|>
|> ..., in the left (Manufacturers) pane, I see...
|>
|> Envision Peripherals, Inc
|>
|> ..., &, in the right (Models) pane, I see...
|>
|> Envision EN5400e
|>
|> ...You seem to be seeing gobbledygook in the Models pane at least!
|> YET, the following ViewSonic VP930 Series entry looks perfectly fine
|> to me in your MSInfo32 screen...
|
| !!!Yes I have "Viewsonic" in the left window and "%VCDTS21367-1%" in
| the right window. Unfortunately when I select the VP930 Series entry
| in the right window, it wants the CD_ROM but can't find the files it
| wants (even though I know they are there). This is the scenario that
| caused the creation of the Default Monitor in the first place, the
| machine couldn't get the drivers off the CD-ROM for some silly reason.
|
| !!!I've sent an e-mail to Viewsonic asking if this driver
| "%VCDTS21367-1%" is appropriate, and if not how to change it. I'm
| also not sure where the driver installer placed all the drivers.

That is a mess! But there is no such driver as "%VCDTS21367-1%". It
looks to me like it is a variable that should have changed to a model
name. You did also get the correct model -- ViewSonic VP930 Series -- in
the right pane, though. However, "%VCDTS21367-1%" is the one highlighted
in the R-Pane. When you try to switch to VP930, a disk is requested &
the drivers won't be found. Yucky!

|> | (d) ViewSonic VP930 Series
|> | Monitor
|> | Registry Key:
|> |
|>
HKEY_LOCAL_MACHINE\enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280
|> 117E
|> | E&REV_01_000800
|> | Alloc resources: None
|> | Forced resources: None
|> | Boot resources: None
|> | Filtered resources: None
|> | Basic resources: None
|> | Driver: Monitor\0000
|> | Driver Date: 2-16-2008
|> | Driver: VP930_Series.ICM
|> | File Size:
|> | Driver Not Installed
|> | File Date:
|> | Driver Not Installed
|>
|> The above looks a lot like mine-- which works perfectly! And I get no
|> Default Monitor anywhere.
|>
|> (1) Post your Registry key, as Zabcar did...
|>
|> HKEY_LOCAL_MACHINE\Enum\MONITOR
|>
|> (a) "START button, Run, RegEdit".
|> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
|> (c) Click the plus sign left of "Enum".
|> (d) Click "MONITOR" in the left pane.
|> (e) Click "Export Registry File" in the "Registry" menu.
|>
|> Have it create a ".txt" file. It will contain the Key that is
|> selected in the left pane, it's sub-keys & the data in the
|> right pane.
|>
|> (f) Close RegEdit, & post the file.
|
| [HKEY_LOCAL_MACHINE\Enum\MONITOR]
|
| [HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B]
|
|
[HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_28
0117
| EE&REV_01_000800]
| "Capabilities"=hex:14,00,00,00
| "InitMonitorPowerState"="0f"
|
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,5a,63,1b,e4,01,01,01,01,14,10,01,03,0
e,26
| ,\
|
|
1f,78,2e,11,45,a4,5a,4a,a0,24,14,50,54,bf,ef,80,81,80,81,40,71,4f,01,01,
01,\
|
|
01,01,01,01,01,01,01,30,2a,00,98,51,00,2a,40,30,70,13,00,78,36,11,00,00,
1e,\
|
|
00,00,00,ff,00,51,38,48,30,36,32,30,30,31,32,35,30,0a,00,00,00,fd,00,32,
4b,\
|
|
1e,52,0e,00,0a,20,20,20,20,20,20,00,00,00,fc,00,56,50,39,33,30,20,53,65,
72,\
| 69,65,73,0a,00,e5
| "HardwareID"="Monitor\\VSCE41B"
| "Class"="Monitor"
| "SerialNum"="Q8H062001250"
| "DeviceDesc"="ViewSonic VP930 Series"
| "MaxResolution"="1280,1024"
| "MonitorRanges"="30-82,50-75,+,+"
| "DPMS"="1"
| "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
| "Driver"="Monitor\\0000"
| "Mfg"="ViewSonic"
| "ConfigFlags"=hex:00,00,00,00

The above looks GOOD to me-- it compares well to mine, as did your
MSInfo! And you haven't complained it isn't working. Problems...

(a) There is gobbledygook in your Update Driver requestor,
which comes up showing the gobbledygook selected.
(b) Default Monitor won't go!

| [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR]
|
|
[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&S
UBSY
| S_280117EE&REV_01_000800_1]
| "Capabilities"=hex:14,00,00,00
| "InitMonitorPowerState"="0f"
| "HardwareID"="Monitor\\Default_Monitor"
| "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
| "Class"="Monitor"
| "Driver"="Monitor\\0002"
| "Mfg"="(Standard monitor types)"
| "DeviceDesc"="Default Monitor"
| "ConfigFlags"=hex:00,00,00,00

Try deleting just the above as I posted separately.

|> I expect we will see two sub-keys under "MONITOR". Also, post the
|> .inf that creates the ViewSonic VP930 Series entry...
|>
|> (a) "START button, Find, F/F"
|> (b) Leave "Named" empty.
|> (c) In "Containing text", enter... "ViewSonic VP930 Series"
|> with the quotes.
|> (d) In "Look in", browse to... "C:\WINDOWS\INF".
|
| !!!Nothing found searching for text "VSCE41B"

Hmm, it wouldn't work for mine, either-- until I removed the quotes.
Apparently they shouldn't be used, unless there is a space (& possibly
other special characters) involved. But no matter!

| !!!VS080114_I19.inf found searching for text "ViewSonic VP930 Series".

Good. My .inf is much, much smaller, & I've deleted what I consider to
be extraneous lines in yours below. I do not see that your .inf actually
creates the Registry entries for that Default Monitor-- something else
is doing it! Your .inf DOES properly create the Registry entries for the
"ViewSonic VP930 Series". And your MSInfo data looks also quite good to
me.

Comparing your abridged .inf to mine, I see nothing startlingly bad.
Although I'm not a perfect expert, my impression seems corroborated in
that your Registry & MSInfo32 stuff look fine for the VP930.

(a) You do actually have a... VP930_Series.ICM?
(My own EN5400e.icm is located in...
C:\WINDOWS\SYSTEM\COLOR.)

(b) In that Update Driver requestor, when "ViewSonic" is
selected in the left (Manufacturers) pane, do you
have a trillion entries in the right (Models) pane?
(I have just "Envision EN5400e" there.)

(c) In that requestor, what are a few Models immediately
before & after "%VCDTS21367-1%"?
(I might be able to spot a syntax error in your .inf, but
oddly I can't spot "%VCDTS21367-1%" itself in there.)

(d) I'm not sure where the Manufacturers & Models that show
up in the Update Drivers requestor come from. There does
not seem to be a list of them in my Registry. I'm thinking
they may be built on the fly from the .inf's in
C:\Windows\Inf. Therefore...

Look through that folder & subfolders for something unusal,
&...

(1) "START button, Find, F/F"
(2) Leave "Named" empty.
(3) In "Containing text", enter... %VCDTS21367-1%
(4) In "Look in", browse to... "C:\WINDOWS\INF".
(5) If it is found, post the .inf.

But, if it is a .bin file-- no sense posting that. Just state its name.

|> Open the .inf file that shows up in Notepad, & post it. If "ViewSonic
|> VP930 Series" won't find it, then try "VSCE41B", no quotes necessary.
|
| Monitor.Inf for Windows(R) 95/98/Me/2000/XP/Server 2003/XP
| x64/Vista/Vista x64
|
| Copyright 2008, ViewSonic Corporation
|
| [Version]
| signature="$CHICAGO$"
| Class=Monitor
| ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
| Provider=%ViewSonic%
| DriverVer=01/14/2008, 1.5.2.44
|
| [DestinationDirs]
| DefaultDestDir= 11
....snip
| VP930_Series.CopyFiles=23
....snip
| [SourceDisksNames]
| 1=%DiskLabel%,,
|
| [SourceDisksFiles]
....snip
| VP930_Series.ICM=1
....snip
| [Manufacturer]
| %ViewSonic%=ViewSonic,NTia64,NTamd64
|
| [ControlFlags]
| ExcludeFromSelect.nt=*
|
| [ViewSonic]
....snip
| %VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
....snip
|
| [ViewSonic.NTia64]
....snip
| %VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
....snip
|
| [ViewSonic.NTamd64]
....snip
| %VP930_Series%=VP930_Series.Install,Monitor\VSCE41B VP930_Series
....snip
|
| [VP930_Series.Install] VP930_Series
| DelReg=DEL_CURRENT_REG
| AddReg=VP930_Series.AddReg,1280,DPMS
| Copyfiles=VP930_Series.CopyFiles
....snip
|
| [DEL_CURRENT_REG]
| HKR,MODES
| HKR,,MaxResolution
| HKR,,DPMS
| HKR,,ICMProfile
|
| [1280]
| HKR,,MaxResolution,,"1280,1024"
| [1440]
| HKR,,MaxResolution,,"1440,900"
| [1680]
| HKR,,MaxResolution,,"1680,1050"
|
| [DPMS]
| HKR,,DPMS,,1
....snip
|
| [VP930_Series.AddReg] VP930_Series
| HKR,"MODES\1280,1024",Mode1,,"30-82,50-75,+,+"
| HKR,,ICMProfile,0,"VP930_Series.ICM"
....snip
|
| [VP930_Series.CopyFiles]
| VP930_Series.ICM
....snip
|
| [Strings]
| ViewSonic="ViewSonic"
| DiskLabel="ViewSonic Wizard"
|
....snip
| VP930_Series="ViewSonic VP930 Series"
....snip

Here is mine, unabridged-- & so much easier to look at...!...

Copyright 2004 Envision Peripherals, Inc.
This is a Setup information file for monitors with ICM file

[Version]
signature="$CHICAGO$"
Class=Monitor
ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
Provider=%EPI%
Catalogfile=EN5400e.cat
DriverVer=08/20/2004,1.0.0.0

[ControlFlags]
ExcludeFromSelect.nt=Monitor\EPIE564

[ClassInstall32]
AddReg=ClassAddReg32

[ClassAddReg32]
HKR,,,,%MonitorClassName%
HKR,,Icon,,"-1"
HKR,,NoInstallClass,,1

[DestinationDirs]
DefaultDestDir=11
E564.CopyFiles=23

[SourceDisksNames]
1=%DISK%,,,

[SourceDisksFiles]
EN5400e.ICM=1

Manufacturer
-------------------------------------------------
[Manufacturer]
%EPI%=EPI

Manufacturer Sections
-------------------------------------------------
[EPI]
%E564%=E564.Install, Monitor\EPIE564

Install Sections
-------------------------------------------------
[E564.Install]
DelReg=DEL_CURRENT_REG
AddReg=E564.AddReg, 1024 ,DPMS
Copyfiles=E564.CopyFiles

Common AddReg/DelReg sections
-------------------------------------------------
[DEL_CURRENT_REG]
HKR,MODES
HKR,,MaxResolution
HKR,,DPMS
HKR,,ICMProfile

[1024]
HKR,,MaxResolution,,"1024,768"

[DPMS]
HKR,,DPMS,,1

Model AddReg sections
-------------------------------------------------
[E564.AddReg]
HKR,"MODES\640,480",Mode1,,"30.0-63.0,55.0-75.0,-,-"
HKR,"MODES\800,600",Mode1,,"30.0-63.0,55.0-75.0,+,+"
HKR,"MODES\1024,768",Mode1,,"30.0-63.0,55.0-75.0,+,+"
HKR,,ICMProfile,0,"EN5400e.icm"

[E564.CopyFiles]
EN5400e.icm

-------------------------------------------------
User visible strings

[Strings]
DISK="EPI Monitor Installation Disk"
MonitorClassName="Monitor"
EPI="Envision Peripherals, Inc"

E564="Envision EN5400e"

|> | Default Monitor
|> | Monitor
|> | This device is disabled.
|> | Registry Key:
|> |
|>
HKEY_LOCAL_MACHINE\enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SU
|> BSYS
|> | _280117EE&REV_01_000800_1
|> | Alloc resources: None
|> | Forced resources: None
|> | Boot resources: None
|> | Filtered resources: None
|> | Basic resources: None
|> | Driver: Monitor\0002
|> | Driver Date: 4-23-1999
|>
|> The above doesn't look especially bad-- except it is unwanted!

....snip
--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net

Brian A. · Feb 22, 2008

Open Explorer.
Expand the tree to C:\Windows\Inf.
Scroll through the files in the Right pane and see if VS080114_I19.inf is present in
the folder.
If it is then you need to remove the "Hidden" attribute on the INF folder. When the
folder is set as hidden you will not be able to see it using browse to get to and
select the file.

If it isn't there or you would rather get the driver files from ViewSonics support
site, they can be obtained here:
http://www.viewsonic.com/support/drivers/driver_information.cfm?category=1&formName=monitor&key=36

This is an updated file VS080115.
Create a new folder to save the file to.
Extract the contents of the file into the same folder.
Run the Setup.exe from the folder.

--

Brian A. Sesko { MS MVP_Windows Desktop User Experience }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375

"Warren" <nospam@nospam.com> wrote in message
news:OYD9xbcdIHA.4164@TK2MSFTNGP05.phx.gbl...
> Brian,
>
> Unfortunately when I search for a file"VS080114_I19.inf" it cannot be found
> on my hard drive. I think I successfuly converted to a Viewsonic monitor by
> pointing to "%VCDTS21367-1%" , the driver being used for my VP930b monitor
> but I still end up with two monitors, which I don't want.
>
>
> "Brian A." <gonefish'n@afarawaylake> wrote in message
> news:%23wP%23hBcdIHA.4172@TK2MSFTNGP02.phx.gbl...
>> "Warren" <nospam@nospam.com> wrote in message
>> news:%235fmYYEdIHA.4144@TK2MSFTNGP05.phx.gbl...
>> <snipped>
>> >>
>> >> (a) "START button, Find, F/F"
>> >> (b) Leave "Named" empty.
>> >> (c) In "Containing text", enter... "ViewSonic VP930 Series"
>> >> with the quotes.
>> >> (d) In "Look in", browse to... "C:\WINDOWS\INF".
>> >
>> > !!!Nothing found searching for text "VSCE41B"
>> > !!!VS080114_I19.inf found searching for text "ViewSonic VP930 Series".
>> >
>> <snipped>
>>
>> Right click MyComputer.
>> Click "Properties" in the popup menu.
>> Click the "Device Manager" tab.
>> Expand "Monitors".
>> Double click on the "Default Monitor" device listed to open its
> properties.
>> Click the "Driver" tab > "Update Driver" button.
>> Click "Next".
>> Select "Display a list of all drivers in a specific location,......" and
> click
>> "Next".
>> Click the "Have Disk" Button.
>> Click the "Browse" button and navigate to the
> Directory\Folder\VS080114_I19.inf file
>> you found earlier.
>> Select the VS080114_I19.inf file in the Left pane and click Ok > Ok >
> Next.
>> Follow the prompts to finish installing the driver.
>>
>>
>> --
>>
>>
>> Brian A. Sesko { MS MVP_Windows Desktop User Experience }
>> Conflicts start where information lacks.
>> http://basconotw.mvps.org/
>>
>> Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
>> How to ask a question: http://support.microsoft.com/kb/555375
>>
>>
>
>

Warren · Feb 22, 2008

This is the Default Monitor registry folder

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR]

[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSY
S_280117EE&REV_01_000800_1]
"Capabilities"=hex:14,00,00,00
"InitMonitorPowerState"="0f"
"HardwareID"="Monitor\\Default_Monitor"
"ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
"Class"="Monitor"
"Driver"="Monitor\\0013"
"Mfg"="(Standard monitor types)"
"DeviceDesc"="Default Monitor"
"ConfigFlags"=hex:00,00,00,00

"PCR" <pcrrcp@netzero.net> wrote in message
news:uKOiIObdIHA.5208@TK2MSFTNGP05.phx.gbl...
> Warren wrote:
> | !!!Please see comments below
> |
> | "PCR" <pcrrcp@netzero.net> wrote in message
> | news:u2ynvpDdIHA.2404@TK2MSFTNGP05.phx.gbl...
> |> Warren wrote:
> |> | (a) Yes both monitors show up under the Monitors branch
> |> |
> |> | (b) Yes, I removed them both before rebooting
> |>
> |> Yea. That was right.
> |>
> |> Looking below, I see the Default Monitor has the notation: "This
> |> device is disabled". Was it like that before you attempted to remove
> |> them both in Safe Mode? Or did you disable it afterwards per
> |> Richards's instruction? Can it be it needs to be enabled before it
> |> can be removed? I might try that...
> |
> | !!!Yes Default Monitor was enabled when I removed it.
>
> Alright, then. That was all done right. I still am studying the stuff
> you posted earlier. I see nothing especially wrong yet, except for the
> gobbledygook in your Update Driver requestor & the fact this Default
> Monitor won't go.
>
> Have you tried deleting just the Default Monitor in the Registry...?...
>
> HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR
>
> (a) "START button, Run, RegEdit".
> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
> (c) Click the plus sign left of "Enum".
> (d) Click the plus sign left of "MONITOR"
> (e) Click "DEFAULT_MONITOR" in the left pane.
> (f) Select "Export Registry File" in the "Registry" menu.
>
> Have it create a ".reg" file. It will contain all the information
> of the Default Monitor. This can be used to restore it, if the
> need may arise.
>
> (g) R-Clk "DEFAULT_MONITOR" in the left pane, & select
> to delete it.
>
> Reboot-- are you rid of it?
>
> By default, when a ".reg" is clicked, it will Merge into the Registry.
> To alter the default behavior...
>
> (a) "START button, Settings, Folder Options, File Types tab".
> (b) Scroll to & click (highlight) "Registration Entries".
> (c) Click the "Edit" button.
> (d) Select (highlight) "Edit" in the window.
> (e) Click the "Set Default" button.
>
> Now, when you click a ".reg" file, it will open in Notepad for
> examination. To merge it into the Registry, R-Clk it & select "Merge".
>
> ...snip
>
>

PCR · Feb 22, 2008

Warren wrote:
| This is the Default Monitor registry folder
|
| [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR]
|
|
[HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&S
UBSY
| S_280117EE&REV_01_000800_1]
| "Capabilities"=hex:14,00,00,00
| "InitMonitorPowerState"="0f"
| "HardwareID"="Monitor\\Default_Monitor"
| "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}"
| "Class"="Monitor"
| "Driver"="Monitor\\0013"
| "Mfg"="(Standard monitor types)"
| "DeviceDesc"="Default Monitor"
| "ConfigFlags"=hex:00,00,00,00

Right. Now, delete it, as I said below--

(g) Right-Click "DEFAULT_MONITOR" in the left pane,
& select to delete it.

That might rid you of the Default Monitor, & all that would be left to
deal with is the gobbledygook in Update Driver.

|
| "PCR" <pcrrcp@netzero.net> wrote in message
| news:uKOiIObdIHA.5208@TK2MSFTNGP05.phx.gbl...
|> Warren wrote:
|> | !!!Please see comments below
|> |
|> | "PCR" <pcrrcp@netzero.net> wrote in message
|> | news:u2ynvpDdIHA.2404@TK2MSFTNGP05.phx.gbl...
|> |> Warren wrote:
|> |> | (a) Yes both monitors show up under the Monitors branch
|> |> |
|> |> | (b) Yes, I removed them both before rebooting
|> |>
|> |> Yea. That was right.
|> |>
|> |> Looking below, I see the Default Monitor has the notation: "This
|> |> device is disabled". Was it like that before you attempted to
|> |> remove them both in Safe Mode? Or did you disable it afterwards
|> |> per Richards's instruction? Can it be it needs to be enabled
|> |> before it can be removed? I might try that...
|> |
|> | !!!Yes Default Monitor was enabled when I removed it.
|>
|> Alright, then. That was all done right. I still am studying the stuff
|> you posted earlier. I see nothing especially wrong yet, except for
|> the gobbledygook in your Update Driver requestor & the fact this
|> Default Monitor won't go.
|>
|> Have you tried deleting just the Default Monitor in the
|> Registry...?...
|>
|> HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR
|>
|> (a) "START button, Run, RegEdit".
|> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
|> (c) Click the plus sign left of "Enum".
|> (d) Click the plus sign left of "MONITOR"
|> (e) Click "DEFAULT_MONITOR" in the left pane.
|> (f) Select "Export Registry File" in the "Registry" menu.
|>
|> Have it create a ".reg" file. It will contain all the
|> information of the Default Monitor. This can be used to
|> restore it, if the need may arise.
|>
|> (g) R-Clk "DEFAULT_MONITOR" in the left pane, & select
|> to delete it.
|>
|> Reboot-- are you rid of it?
|>
|> By default, when a ".reg" is clicked, it will Merge into the
|> Registry. To alter the default behavior...
|>
|> (a) "START button, Settings, Folder Options, File Types tab".
|> (b) Scroll to & click (highlight) "Registration Entries".
|> (c) Click the "Edit" button.
|> (d) Select (highlight) "Edit" in the window.
|> (e) Click the "Set Default" button.
|>
|> Now, when you click a ".reg" file, it will open in Notepad for
|> examination. To merge it into the Registry, R-Clk it & select
|> "Merge".
|>
|> ...snip

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net

Warren · Feb 22, 2008

Yes, I tried deleting the Default Monitor in the Registry, I also tried a
combination of deleting the Registry entry, removing the device from Device
Manaager and removing the graphics card from Device Manager. In every
scenario the Default Monitor came back.

"PCR" <pcrrcp@netzero.net> wrote in message
news:uKOiIObdIHA.5208@TK2MSFTNGP05.phx.gbl...
>
> Have you tried deleting just the Default Monitor in the Registry...?...
>
> HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR
>
> (a) "START button, Run, RegEdit".
> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
> (c) Click the plus sign left of "Enum".
> (d) Click the plus sign left of "MONITOR"
> (e) Click "DEFAULT_MONITOR" in the left pane.
> (f) Select "Export Registry File" in the "Registry" menu.
>
> Have it create a ".reg" file. It will contain all the information
> of the Default Monitor. This can be used to restore it, if the
> need may arise.
>
> (g) R-Clk "DEFAULT_MONITOR" in the left pane, & select
> to delete it.
>
> Reboot-- are you rid of it?
>
> By default, when a ".reg" is clicked, it will Merge into the Registry.
> To alter the default behavior...
>
> (a) "START button, Settings, Folder Options, File Types tab".
> (b) Scroll to & click (highlight) "Registration Entries".
> (c) Click the "Edit" button.
> (d) Select (highlight) "Edit" in the window.
> (e) Click the "Set Default" button.
>
> Now, when you click a ".reg" file, it will open in Notepad for
> examination. To merge it into the Registry, R-Clk it & select "Merge".
>
> ...snip
>
>

PCR · Feb 22, 2008

Warren wrote:
| Yes, I tried deleting the Default Monitor in the Registry, I also
| tried a combination of deleting the Registry entry, removing the
| device from Device Manaager and removing the graphics card from
| Device Manager. In every scenario the Default Monitor came back.

Hmm. Too, too bad it wasn't that easy! I omitted that you should reboot
after deleting it, but I presume you did. Sheesh! I'm still thinking. In
the meantime...

It might be advisable to take the updated driver Brian A. mentioned.
Perhaps getting it installed will then allow the Default Monitor to go.
And it would a nice surprise if it fixed that Update Driver requestor
too!

| "PCR" <pcrrcp@netzero.net> wrote in message
| news:uKOiIObdIHA.5208@TK2MSFTNGP05.phx.gbl...
|>
|> Have you tried deleting just the Default Monitor in the
|> Registry...?...
|>
|> HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR
|>
|> (a) "START button, Run, RegEdit".
|> (b) Click the plus sign to left of "HKEY_LOCAL_MACHINE".
|> (c) Click the plus sign left of "Enum".
|> (d) Click the plus sign left of "MONITOR"
|> (e) Click "DEFAULT_MONITOR" in the left pane.
|> (f) Select "Export Registry File" in the "Registry" menu.
|>
|> Have it create a ".reg" file. It will contain all the
|> information of the Default Monitor. This can be used to
|> restore it, if the need may arise.
|>
|> (g) R-Clk "DEFAULT_MONITOR" in the left pane, & select
|> to delete it.
|>
|> Reboot-- are you rid of it?
|>
|> By default, when a ".reg" is clicked, it will Merge into the
|> Registry. To alter the default behavior...
|>
|> (a) "START button, Settings, Folder Options, File Types tab".
|> (b) Scroll to & click (highlight) "Registration Entries".
|> (c) Click the "Edit" button.
|> (d) Select (highlight) "Edit" in the window.
|> (e) Click the "Set Default" button.
|>
|> Now, when you click a ".reg" file, it will open in Notepad for
|> examination. To merge it into the Registry, R-Clk it & select
|> "Merge".
|>
|> ...snip

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net

Trouble with new display and Device Manager

Warren

philo

Jeff Richards

dadiOH

PCR

Warren

PCR

Warren

Franc Zabkar

PCR

Warren

PCR

Brian A.

Warren

PCR

Brian A.

Warren

PCR

Warren

PCR

Similar threads