- Thread starter
- #41
B
Bill in Co.
PCR wrote:
> Bill in Co. wrote:
>> PCR wrote:
>>> Bill in Co. wrote:
>>>> PCR wrote:
>>>
>>> ...snip
>>>>>>>>> Hmm. It seems strange that nothing at all would happen-- not
>>>>>>>>> even dying words (which always are true) or a last gasp!
>>>>>>>>
>>>>>>>> Not if the power supply doesn't get the "good to go" signal
>>>>>>>> (from some PS_ON control IC, that presumably got initially
>>>>>>>> destroyed) to turn it fully on.
>>>>>>>
>>>>>>> OK. You've said it twice & I'm sure I've heard it before too.
>>>>>>> That's good enough now. Yet... I'm still wondering why there was
>>>>>>> no bang (& not even a whimper)... when that fatally pinned
>>>>>>> replacement power supply was first connected. It doesn't seem
>>>>>>> right that a MB could die w/o a sound at the hands of a power
>>>>>>> supply!
>>>>>>
>>>>>> Not necessarily. An IC (integrated circuit) chip or transistor,
>>>>>> etc, can die silently with incorrect voltages. Of course, if
>>>>>> one wanted to, one could "up" the voltages even more, and under
>>>>>> the right conditions, blow it literally apart (like blow its case
>>>>>> off). THEN you would hear it.
>>>>>
>>>>> All right. I'm sure you are right. The 3 noisy experiences I've had
>>>>> were unrelated to the MB...
>>>>>
>>>>> Hard drive crash Had to be replaced & has a rattle now.
>>>>> CD-ROM crash Worked fine 3/so days later,
>>>>> after I got the CD out of it.
>>>>> Speakers Smaller ones blew up! The originals
>>>>> worked fine when replugged & still do.
>>>>
>>>> But all of those have some mechanical components (which can move and
>>>> make noise), which explains why. Purely electronic components
>>>> (resistors, capacitors, transistors, ICs, etc, etc) are normally
>>>> silent nothing "moves" in there (except electrons). Hence, no
>>>> noise (under MOST circumstances - an exception being if you blow it
>>>> apart with quite excessive voltage).
>>>
>>> Understood. OK. I guess I was thinking really of electric arcing.
>>
>> True - that makes noise, but that takes a pretty decent amount of
>> voltage (and a lot of current flows when it arcs!).
>
> You are the former electrician who would know, Colorado. I'v replaced
Actually not an electrician, but an EE. There is a difference - in that
you wouldn't want me to try and wire up a house!! (I don't know the
electrical codes, and haven't done that stuff that's for the licensed
electricians)
> light fixtures, & I've changed electric sockets from 2 to 3 prong.
And that's 120 VAC!!
In the power supply's output, we're just dealing with 3.3V, 5V and 12V.
> Sitting right on top of it & feeling the shock, that did make noise too
> without moving parts other than my finger & flying wires when I got the
> wires wrong. But it's much bigger than the stuff on circuit boards.
Yeah.
I never have been able to replace a light switch with the power on w/o
getting some shock at some point (I was too lazy to find which ckt breaker
turned it off, so I thought I'd take a "shortcut" - never works well for me)
> ...snip
>>>> Everything is fine now, as I've replaced the motherboard, and am up
>>>> and running!
>>>
>>> I'm overjoyed! Good going!
>>
>> Thanks. Me too! Now I'm getting back to what I was originally
>> working on - making it quieter. But NOT as quiet as it has been
>> over the last few days!
>
> Ah, ha, ha! I suppose it was really is the fan on the power supply that
> is noisy. Can't you get just that?
LOL. Actually, I'm taking on the other one (the case fan) now!
Once (IF) that one gets done, I'll "reconsider" the power supply and its
fan, but with a bit more "diligence". This time, I want to see my Dell
model number in there!
> Bill in Co. wrote:
>> PCR wrote:
>>> Bill in Co. wrote:
>>>> PCR wrote:
>>>
>>> ...snip
>>>>>>>>> Hmm. It seems strange that nothing at all would happen-- not
>>>>>>>>> even dying words (which always are true) or a last gasp!
>>>>>>>>
>>>>>>>> Not if the power supply doesn't get the "good to go" signal
>>>>>>>> (from some PS_ON control IC, that presumably got initially
>>>>>>>> destroyed) to turn it fully on.
>>>>>>>
>>>>>>> OK. You've said it twice & I'm sure I've heard it before too.
>>>>>>> That's good enough now. Yet... I'm still wondering why there was
>>>>>>> no bang (& not even a whimper)... when that fatally pinned
>>>>>>> replacement power supply was first connected. It doesn't seem
>>>>>>> right that a MB could die w/o a sound at the hands of a power
>>>>>>> supply!
>>>>>>
>>>>>> Not necessarily. An IC (integrated circuit) chip or transistor,
>>>>>> etc, can die silently with incorrect voltages. Of course, if
>>>>>> one wanted to, one could "up" the voltages even more, and under
>>>>>> the right conditions, blow it literally apart (like blow its case
>>>>>> off). THEN you would hear it.
>>>>>
>>>>> All right. I'm sure you are right. The 3 noisy experiences I've had
>>>>> were unrelated to the MB...
>>>>>
>>>>> Hard drive crash Had to be replaced & has a rattle now.
>>>>> CD-ROM crash Worked fine 3/so days later,
>>>>> after I got the CD out of it.
>>>>> Speakers Smaller ones blew up! The originals
>>>>> worked fine when replugged & still do.
>>>>
>>>> But all of those have some mechanical components (which can move and
>>>> make noise), which explains why. Purely electronic components
>>>> (resistors, capacitors, transistors, ICs, etc, etc) are normally
>>>> silent nothing "moves" in there (except electrons). Hence, no
>>>> noise (under MOST circumstances - an exception being if you blow it
>>>> apart with quite excessive voltage).
>>>
>>> Understood. OK. I guess I was thinking really of electric arcing.
>>
>> True - that makes noise, but that takes a pretty decent amount of
>> voltage (and a lot of current flows when it arcs!).
>
> You are the former electrician who would know, Colorado. I'v replaced
Actually not an electrician, but an EE. There is a difference - in that
you wouldn't want me to try and wire up a house!! (I don't know the
electrical codes, and haven't done that stuff that's for the licensed
electricians)
> light fixtures, & I've changed electric sockets from 2 to 3 prong.
And that's 120 VAC!!
In the power supply's output, we're just dealing with 3.3V, 5V and 12V.
> Sitting right on top of it & feeling the shock, that did make noise too
> without moving parts other than my finger & flying wires when I got the
> wires wrong. But it's much bigger than the stuff on circuit boards.
Yeah.
I never have been able to replace a light switch with the power on w/o
getting some shock at some point (I was too lazy to find which ckt breaker
turned it off, so I thought I'd take a "shortcut" - never works well for me)
> ...snip
>>>> Everything is fine now, as I've replaced the motherboard, and am up
>>>> and running!
>>>
>>> I'm overjoyed! Good going!
>>
>> Thanks. Me too! Now I'm getting back to what I was originally
>> working on - making it quieter. But NOT as quiet as it has been
>> over the last few days!
>
> Ah, ha, ha! I suppose it was really is the fan on the power supply that
> is noisy. Can't you get just that?
LOL. Actually, I'm taking on the other one (the case fan) now!
Once (IF) that one gets done, I'll "reconsider" the power supply and its
fan, but with a bit more "diligence". This time, I want to see my Dell
model number in there!